From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/6] asm/omap_gpmc.h: consolidate common defines
Date: Tue, 2 Apr 2013 18:05:54 +0200 [thread overview]
Message-ID: <1364918758-17778-2-git-send-email-andreas.devel@googlemail.com> (raw)
In-Reply-To: <1364918758-17778-1-git-send-email-andreas.devel@googlemail.com>
arch/arm/include/asm/arch-am33xx/omap_gpmc.h and
arch/arm/include/asm/arch-omap3/omap_gpmc.h are almost the same, consolidate
the common parts into a new header.
Introduce a new asm/omap_gpmc.h which defines the command part and pulls in
the architecture specific one.
Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
Cc: Tom Rini <trini@ti.com>
---
new in v2
arch/arm/cpu/armv7/am33xx/elm.c | 2 +-
arch/arm/include/asm/arch-am33xx/omap_gpmc.h | 58 +--------------------
arch/arm/include/asm/arch-omap3/omap_gpmc.h | 57 --------------------
arch/arm/include/asm/{arch-omap3 => }/omap_gpmc.h | 19 +++----
board/isee/igep00x0/igep00x0.c | 2 +-
board/overo/overo.c | 2 +-
drivers/mtd/nand/omap_gpmc.c | 2 +-
7 files changed, 12 insertions(+), 130 deletions(-)
copy arch/arm/include/asm/{arch-omap3 => }/omap_gpmc.h (80%)
diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c
index 9eed23d..41df612 100644
--- a/arch/arm/cpu/armv7/am33xx/elm.c
+++ b/arch/arm/cpu/armv7/am33xx/elm.c
@@ -33,7 +33,7 @@
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/cpu.h>
-#include <asm/arch/omap_gpmc.h>
+#include <asm/omap_gpmc.h>
#include <asm/arch/elm.h>
#define ELM_DEFAULT_POLY (0)
diff --git a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h
index 572f9d0..d03f1db 100644
--- a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h
+++ b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h
@@ -23,63 +23,7 @@
#ifndef __ASM_ARCH_OMAP_GPMC_H
#define __ASM_ARCH_OMAP_GPMC_H
-#define GPMC_BUF_EMPTY 0
-#define GPMC_BUF_FULL 1
-
-#define ECCCLEAR (0x1 << 8)
-#define ECCRESULTREG1 (0x1 << 0)
-#define ECCSIZE512BYTE 0xFF
-#define ECCSIZE1 (ECCSIZE512BYTE << 22)
-#define ECCSIZE0 (ECCSIZE512BYTE << 12)
-#define ECCSIZE0SEL (0x000 << 0)
-
-/* Generic ECC Layouts */
-/* Large Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 12,\
- .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\
- 9, 10, 11, 12},\
- .oobfree = {\
- {.offset = 13,\
- .length = 51 } } \
-}
-#endif
-
-/* Large Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 12,\
- .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\
- 10, 11, 12, 13},\
- .oobfree = {\
- {.offset = 14,\
- .length = 50 } } \
-}
-#endif
-
-/* Small Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 3,\
- .eccpos = {1, 2, 3},\
- .oobfree = {\
- {.offset = 4,\
- .length = 12 } } \
-}
-#endif
-
-/* Small Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 3,\
- .eccpos = {2, 3, 4},\
- .oobfree = {\
- {.offset = 5,\
- .length = 11 } } \
-}
-#endif
-
+/* These GPMC_NAND_HW_BCHx_ECC_LAYOUT defines are based on AM33xx ELM */
#define GPMC_NAND_HW_BCH4_ECC_LAYOUT {\
.eccbytes = 32,\
.eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\
diff --git a/arch/arm/include/asm/arch-omap3/omap_gpmc.h b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
index 800e4ee..13efab0 100644
--- a/arch/arm/include/asm/arch-omap3/omap_gpmc.h
+++ b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
@@ -23,63 +23,6 @@
#ifndef __ASM_ARCH_OMAP_GPMC_H
#define __ASM_ARCH_OMAP_GPMC_H
-#define GPMC_BUF_EMPTY 0
-#define GPMC_BUF_FULL 1
-
-#define ECCCLEAR (0x1 << 8)
-#define ECCRESULTREG1 (0x1 << 0)
-#define ECCSIZE512BYTE 0xFF
-#define ECCSIZE1 (ECCSIZE512BYTE << 22)
-#define ECCSIZE0 (ECCSIZE512BYTE << 12)
-#define ECCSIZE0SEL (0x000 << 0)
-
-/* Generic ECC Layouts */
-/* Large Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 12,\
- .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\
- 9, 10, 11, 12},\
- .oobfree = {\
- {.offset = 13,\
- .length = 51 } } \
-}
-#endif
-
-/* Large Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 12,\
- .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\
- 10, 11, 12, 13},\
- .oobfree = {\
- {.offset = 14,\
- .length = 50 } } \
-}
-#endif
-
-/* Small Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 3,\
- .eccpos = {1, 2, 3},\
- .oobfree = {\
- {.offset = 4,\
- .length = 12 } } \
-}
-#endif
-
-/* Small Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
- .eccbytes = 3,\
- .eccpos = {2, 3, 4},\
- .oobfree = {\
- {.offset = 5,\
- .length = 11 } } \
-}
-#endif
-
/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
#define NET_LAN9221_GPMC_CONFIG1 0x00001000
#define NET_LAN9221_GPMC_CONFIG2 0x00060700
diff --git a/arch/arm/include/asm/arch-omap3/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h
similarity index 80%
copy from arch/arm/include/asm/arch-omap3/omap_gpmc.h
copy to arch/arm/include/asm/omap_gpmc.h
index 800e4ee..5cb1df1 100644
--- a/arch/arm/include/asm/arch-omap3/omap_gpmc.h
+++ b/arch/arm/include/asm/omap_gpmc.h
@@ -2,6 +2,8 @@
* (C) Copyright 2004-2008 Texas Instruments, <www.ti.com>
* Rohit Choraria <rohitkc@ti.com>
*
+ * (C) Copyright 2013 Andreas Bie?mann <andreas.devel@googlemail.com>
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -20,8 +22,10 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-#ifndef __ASM_ARCH_OMAP_GPMC_H
-#define __ASM_ARCH_OMAP_GPMC_H
+#ifndef __ASM_OMAP_GPMC_H
+#define __ASM_OMAP_GPMC_H
+
+#include <asm/arch/omap_gpmc.h>
#define GPMC_BUF_EMPTY 0
#define GPMC_BUF_FULL 1
@@ -80,13 +84,4 @@
}
#endif
-/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 0x00060700
-#define NET_LAN9221_GPMC_CONFIG3 0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 0x06000700
-#define NET_LAN9221_GPMC_CONFIG5 0x0006090A
-#define NET_LAN9221_GPMC_CONFIG6 0x87030000
-#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
-
-#endif /* __ASM_ARCH_OMAP_GPMC_H */
+#endif /* __ASM_OMAP_GPMC_H */
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 2bac916..0d4679d 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -24,7 +24,7 @@
#include <twl4030.h>
#include <netdev.h>
#include <asm/gpio.h>
-#include <asm/arch/omap_gpmc.h>
+#include <asm/omap_gpmc.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mmc_host_def.h>
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 8690450..c10c44c 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -37,7 +37,7 @@
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/omap_gpmc.h>
+#include <asm/omap_gpmc.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
#include "overo.h"
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index bbf5443..c7d4999 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -26,7 +26,7 @@
#include <asm/errno.h>
#include <asm/arch/mem.h>
#include <asm/arch/cpu.h>
-#include <asm/arch/omap_gpmc.h>
+#include <asm/omap_gpmc.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/compiler.h>
#include <nand.h>
--
1.7.10.4
next prev parent reply other threads:[~2013-04-02 16:05 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-23 15:14 [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3 Andreas Bießmann
2012-11-23 15:14 ` [U-Boot] [RFC/PATCH 1/4] omap3/cpu.h: add BCH support Andreas Bießmann
2012-11-23 15:14 ` [U-Boot] [RFC/PATCH 2/4] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel Andreas Bießmann
2012-11-23 15:14 ` [U-Boot] [RFC/PATCH 3/4] omap_gpmc: add support for hw assisted BCH8 Andreas Bießmann
2012-11-26 21:09 ` Scott Wood
2012-11-23 15:14 ` [U-Boot] [RFC/PATCH 4/4] tricorder: enable hw assisted BCH8 in SPL and u-boot Andreas Bießmann
2013-03-28 10:49 ` [U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3 Andreas Bießmann
2013-03-28 14:21 ` Tom Rini
2013-04-02 8:49 ` Andreas Bießmann
2013-04-02 16:13 ` Tom Rini
2013-04-02 16:05 ` [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support Andreas Bießmann
2013-04-02 16:05 ` Andreas Bießmann [this message]
2013-04-02 21:19 ` [U-Boot] [PATCH v2 2/6] asm/omap_gpmc.h: consolidate common defines Tom Rini
2013-04-02 16:05 ` [U-Boot] [PATCH v2 3/6] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel Andreas Bießmann
2013-04-02 21:19 ` Tom Rini
2013-04-02 16:05 ` [U-Boot] [PATCH v2 4/6] omap_gpmc: change nandecc command Andreas Bießmann
2013-04-02 21:19 ` Tom Rini
2013-04-03 14:50 ` [U-Boot] [PATCH v3 " Andreas Bießmann
2013-04-03 14:50 ` [U-Boot] [PATCH v3 5/6] omap_gpmc: add support for hw assisted BCH8 Andreas Bießmann
2013-04-05 8:13 ` Thomas Weber
2013-04-05 9:15 ` Andreas Bießmann
2013-04-05 11:44 ` Thomas Weber
2013-04-05 13:42 ` Andreas Bießmann
2013-04-05 14:55 ` [U-Boot] [PATCH v4 " Andreas Bießmann
2013-04-05 9:52 ` [U-Boot] [PATCH v4 4/6] omap_gpmc: change nandecc command Andreas Bießmann
2013-04-05 11:48 ` Thomas Weber
2013-04-05 13:39 ` Andreas Bießmann
2013-04-02 16:05 ` [U-Boot] [PATCH v2 5/6] omap_gpmc: add support for hw assisted BCH8 Andreas Bießmann
2013-04-02 21:19 ` Tom Rini
2013-04-02 16:05 ` [U-Boot] [PATCH v2 6/6] tricorder: enable hw assisted BCH8 in SPL and u-boot Andreas Bießmann
2013-04-02 21:19 ` [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support Tom Rini
2013-04-08 16:58 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364918758-17778-2-git-send-email-andreas.devel@googlemail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox