[U-Boot] [PATCH v2 6/7] mtd: nand: add driver for diskonchip g4 nand flash

[Scott Wood <scottwood@freescale.com>]

On 04/11/2013 02:19:37 PM, Marek Vasut wrote:
> Dear Mike Dunn,
> 
> > This patch adds a driver for the diskonchip G4 nand flash device.   
> It is
> > based on the driver from the linux kernel.
> >
> > This also includes a separate SPL driver.  A separate SPL driver is  
> used
> > because the device operates in a different mode (reliable mode) when
> > loading a boot image, and also because the storage format of the  
> boot
> > image is different from normal data (pages are stored  
> redundantly).  The
> > SPL driver basically mimics how a typical IPL reads data from the  
> device.
> > The special operating mode and storage format are used to  
> compensate for
> > the fact that the IPL does not contain the BCH ecc decoding  
> algorithm (due
> > to size constraints).  Although the u-boot SPL *could* use ecc, it
> > operates like an IPL for the sake of simplicity and uniformity,  
> since the
> > IPL and SPL share the task of loading the u-boot image. As a side  
> benefit,
> > the SPL driver is very small.
> >
> > [port from linux kernel 3.4 commit
> > 570469f3bde7f71cc1ece07a18d54a05b6a8775d]
> 
> Scott, this really is your turf.

I already acked it (it's up to Mike what he wants to do with dbg).   
Feel free to pick it up as part of the larger patchset -- it's a  
dependency for patch 7/7 that adds the board support.

-Scott