From: amit <nightrapper@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] USB detection in u-boot oin our custom board
Date: Sun, 21 Apr 2013 22:54:18 -0700 (PDT) [thread overview]
Message-ID: <1366610058245-152970.post@n7.nabble.com> (raw)
Sir,
We are having our own custom board based on the FDI design,on which we are
not able to mount USB. In the eaboard configuration files support for usb in
the u-boot is there and we have commands to check the usb inserted. But this
was not the case with FDI board,there were no commands for usb in uboot. So
we inserted the files from the eaboard to our code and we were able to check
USB command in u-boot.
my query are Do fdi board support USB?
When i am executing the below command following errors are coming:
[code]
uboot> usb reset
[code]
[Quote]
(Re)start USB...
USB:
ISP1301 Vendor ID : 0x04cc
ISP1301 Product ID : 0x1301
ISP1301 Version ID : 0x0210
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... ERROR: USB-error:
DEVICENOTRESPONDId
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN)
or d
not provide a handshake (OUT) (5)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
excd
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
exced
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
excd
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
exced
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
excd
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
exced
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
excd
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
exced
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
excd
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
exced
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
** Can't read Driver Desriptor Block **
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
excd
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
ERROR: USB-error: DATAOVERRUN: The amount of data returned by the endpoint
exced
either the size of the maximum data packet allowed
from the endpoint (found in MaximumPacketSize field
of ED) or the remaining buffer size. (8)
1 Storage Device(s) found
[Quote]
can anyone suggest we where the problem is?
--
View this message in context: http://u-boot.10912.n7.nabble.com/USB-detection-in-u-boot-oin-our-custom-board-tp152970.html
Sent from the U-Boot mailing list archive at Nabble.com.
reply other threads:[~2013-04-22 5:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366610058245-152970.post@n7.nabble.com \
--to=nightrapper@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox