[U-Boot] [PATCH 2/2] davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK

Eric Bénard
2013-04-22T15:55:00Z

these variables are curently defined in several config files but the
driver doesn't use them and defaults to hardcoded values in
nand_defs.h

It's interesting to be able to change this hardcoded valude when the
hardware is not using the default adress signals to drive ALE and CLE
and two configuration defines already exist for this purpose so use
them.

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
arch/arm/include/asm/arch-davinci/nand_defs.h | 9 +++++++++
include/configs/da830evm.h | 4 ++--
include/configs/da850evm.h | 4 ++--
include/configs/enbw_cmc.h | 4 ++--
include/configs/tnetv107x_evm.h | 4 ++--
5 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/arch/arm/include/asm/arch-davinci/nand_defs.h b/arch/arm/include/asm/arch-davinci/nand_defs.h
index 10f3a39..4a30813 100644
--- a/arch/arm/include/asm/arch-davinci/nand_defs.h
+++ b/arch/arm/include/asm/arch-davinci/nand_defs.h
@@ -36,6 +36,15 @@
#define MASK_ALE 0x08
#endif

+#ifdef CONFIG_SYS_NAND_MASK_CLE
+#undef MASK_CLE
+#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE
+#endif
+#ifdef CONFIG_SYS_NAND_MASK_ALE
+#undef MASK_ALE
+#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE
+#endif
+
#define NAND_READ_START 0x00
#define NAND_READ_END 0x30
#define NAND_STATUS 0x70
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index f7ac256..198892b 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -109,8 +109,8 @@
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#endif

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 583568d..c420967 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -199,8 +199,8 @@
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index 2d63b67..97bc972 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -118,8 +118,8 @@
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#undef CONFIG_SYS_NAND_HW_ECC
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */

diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index d6371fc..cabc06e 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -82,8 +82,8 @@
#define CONFIG_SYS_NAND_CS 2
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
-#define CONFIG_SYS_CLE_MASK 0x10
-#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_NAND_MASK_CLE 0x10
+#define CONFIG_SYS_NAND_MASK_ALE 0x8
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
--
1.7.11.7