From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 24/25] imx: m53evk: Convert to iomux-v3
Date: Fri, 3 May 2013 22:43:26 +0200 (CEST) [thread overview]
Message-ID: <1366755515.533187.1367613806685.JavaMail.root@advansee.com> (raw)
In-Reply-To: <1367613157-7565-24-git-send-email-benoit.thebaudeau@advansee.com>
Hi Stefano, Marek,
On Friday, May 3, 2013 10:32:36 PM, Beno?t Th?baudeau wrote:
> There is no change of behavior, except for the folloing line that has been
> removed because the iomux mode was not set accordingly and the pad used for
> OTG
> OC is not this one:
> mxc_iomux_set_input(MX53_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT, 1);
>
> Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> ---
> Changes in v3:
> - New patch (series rebased on top of Marek's m53evk series).
[...]
This new version supersedes and concatenates my previous mx25/35/5x iomux
series in order to avoid a dependency hell for you. It also makes a few fixes.
It is rebased on top of Marek's m53evk series since the series were posted in
that order. But if you prefer to apply the series the other way around, you
simply have to amend Marek's series with this 24/25 instead of applying it
within my series.
Best regards,
Beno?t
next prev parent reply other threads:[~2013-05-03 20:43 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-03 20:32 [U-Boot] [PATCH v3 01/25] imx: iomux-v3: Add iomux-mx25.h Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 02/25] imx: mx25pdk: Convert to iomux-v3 Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 03/25] imx: mx25pdk: Fix GPIO assignments Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 04/25] imx: tx25: Convert to iomux-v3 Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 05/25] imx: zmx25: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 06/25] imx: mx25: Remove legacy iomux support Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 07/25] imx: iomux-v3: Add iomux-mx35.h Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 08/25] imx: flea3: Convert to iomux-v3 Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 09/25] imx: mx35pdk: Fix WDOG_RST iomux function Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 10/25] imx: mx35pdk: Convert to iomux-v3 Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 11/25] imx: woodburn: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 12/25] imx: mx35: Remove legacy iomux support Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 13/25] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27 Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 14/25] imx: iomux-v3: Add missing definitions to iomux-mx51.h Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 15/25] imx: mx51evk: Convert to iomux-v3 Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 16/25] imx: mx51_efikamx/sb: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 17/25] imx: vision2: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 18/25] imx: iomux-v3: Add iomux-mx53.h Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 19/25] imx: ima3-mx53: Convert to iomux-v3 Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 20/25] imx: mx53ard: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 21/25] imx: mx53evk: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 22/25] imx: mx53loco: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 23/25] imx: mx53smd: " Benoît Thébaudeau
2013-05-03 20:32 ` [U-Boot] [PATCH v3 24/25] imx: m53evk: " Benoît Thébaudeau
2013-05-03 20:43 ` Benoît Thébaudeau [this message]
2013-05-05 16:09 ` Stefano Babic
2013-05-03 20:32 ` [U-Boot] [PATCH v3 25/25] imx: mx5: Remove legacy iomux support Benoît Thébaudeau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366755515.533187.1367613806685.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox