From: Rob Herring <robherring2@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions
Date: Tue, 21 May 2013 17:44:36 -0500 [thread overview]
Message-ID: <1369176276-1895-7-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1369176276-1895-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
libata already has similar functions as implemented in the ahci code.
Refactor the code to use the libata variants and remove the dependency on
ata.h. Convert some defines to use the version from libata.h. Also, remove
some unnecessary memset's of bss data.
This is a step toward hopefully merging ahci.c and dw_ahsata.c which are
essentially the same driver.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
drivers/block/ahci.c | 80 +++++++++++++------------------------------
include/ahci.h | 23 -------------
include/configs/MPC8544DS.h | 1 +
include/configs/MPC8572DS.h | 1 +
include/configs/MPC8610HPCD.h | 1 +
include/configs/MPC8641HPCN.h | 1 +
include/configs/P2020DS.h | 1 +
include/configs/coreboot.h | 1 +
include/configs/highbank.h | 1 +
9 files changed, 31 insertions(+), 79 deletions(-)
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index ac60891..8c17f1a 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -33,14 +33,14 @@
#include <asm/io.h>
#include <malloc.h>
#include <scsi.h>
-#include <ata.h>
+#include <libata.h>
#include <linux/ctype.h>
#include <ahci.h>
static int ata_io_flush(u8 port);
struct ahci_probe_ent *probe_ent = NULL;
-hd_driveid_t *ataid[AHCI_MAX_PORTS];
+u16 *ataid[AHCI_MAX_PORTS];
#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
@@ -257,7 +257,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
j = 0;
while (j < WAIT_MS_SPINUP) {
tmp = readl(port_mmio + PORT_TFDATA);
- if (!(tmp & (ATA_STAT_BUSY | ATA_STAT_DRQ)))
+ if (!(tmp & (ATA_BUSY | ATA_DRQ)))
break;
udelay(1000);
tmp = readl(port_mmio + PORT_SCR_STAT) & 0xf;
@@ -394,8 +394,6 @@ static int ahci_init_one(pci_dev_t pdev)
u16 vendor;
int rc;
- memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
-
probe_ent = malloc(sizeof(struct ahci_probe_ent));
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->dev = pdev;
@@ -485,7 +483,7 @@ static void ahci_set_feature(u8 port)
memset(fis, 0, sizeof(fis));
fis[0] = 0x27;
fis[1] = 1 << 7;
- fis[2] = ATA_CMD_SETF;
+ fis[2] = ATA_CMD_SET_FEATURES;
fis[3] = SETFEATURES_XFER;
fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01;
@@ -623,27 +621,6 @@ static char *ata_id_strcpy(u16 *target, u16 *src, int len)
return (char *)target;
}
-
-static void dump_ataid(hd_driveid_t *ataid)
-{
- debug("(49)ataid->capability = 0x%x\n", ataid->capability);
- debug("(53)ataid->field_valid =0x%x\n", ataid->field_valid);
- debug("(63)ataid->dma_mword = 0x%x\n", ataid->dma_mword);
- debug("(64)ataid->eide_pio_modes = 0x%x\n", ataid->eide_pio_modes);
- debug("(75)ataid->queue_depth = 0x%x\n", ataid->queue_depth);
- debug("(80)ataid->major_rev_num = 0x%x\n", ataid->major_rev_num);
- debug("(81)ataid->minor_rev_num = 0x%x\n", ataid->minor_rev_num);
- debug("(82)ataid->command_set_1 = 0x%x\n", ataid->command_set_1);
- debug("(83)ataid->command_set_2 = 0x%x\n", ataid->command_set_2);
- debug("(84)ataid->cfsse = 0x%x\n", ataid->cfsse);
- debug("(85)ataid->cfs_enable_1 = 0x%x\n", ataid->cfs_enable_1);
- debug("(86)ataid->cfs_enable_2 = 0x%x\n", ataid->cfs_enable_2);
- debug("(87)ataid->csf_default = 0x%x\n", ataid->csf_default);
- debug("(88)ataid->dma_ultra = 0x%x\n", ataid->dma_ultra);
- debug("(93)ataid->hw_config = 0x%x\n", ataid->hw_config);
-}
-
-
/*
* SCSI INQUIRY command operation.
*/
@@ -657,7 +634,7 @@ static int ata_scsiop_inquiry(ccb *pccb)
95 - 4,
};
u8 fis[20];
- u8 *tmpid;
+ u16 *tmpid;
u8 port;
/* Clean ccb data buffer */
@@ -672,15 +649,16 @@ static int ata_scsiop_inquiry(ccb *pccb)
/* Construct the FIS */
fis[0] = 0x27; /* Host to device FIS. */
fis[1] = 1 << 7; /* Command FIS. */
- fis[2] = ATA_CMD_IDENT; /* Command byte. */
+ fis[2] = ATA_CMD_ID_ATA; /* Command byte. */
/* Read id from sata */
port = pccb->target;
- if (!(tmpid = malloc(sizeof(hd_driveid_t))))
+ tmpid = malloc(ATA_ID_WORDS * 2);
+ if (!tmpid)
return -ENOMEM;
- if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), tmpid,
- sizeof(hd_driveid_t), 0)) {
+ if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
+ ATA_ID_WORDS * 2, 0)) {
debug("scsi_ahci: SCSI inquiry command failure.\n");
free(tmpid);
return -EIO;
@@ -688,13 +666,16 @@ static int ata_scsiop_inquiry(ccb *pccb)
if (ataid[port])
free(ataid[port]);
- ataid[port] = (hd_driveid_t *) tmpid;
+ ataid[port] = tmpid;
+ ata_swap_buf_le16(tmpid, ATA_ID_WORDS);
memcpy(&pccb->pdata[8], "ATA ", 8);
- ata_id_strcpy((u16 *) &pccb->pdata[16], (u16 *)ataid[port]->model, 16);
- ata_id_strcpy((u16 *) &pccb->pdata[32], (u16 *)ataid[port]->fw_rev, 4);
+ ata_id_strcpy((u16 *) &pccb->pdata[16], &tmpid[ATA_ID_PROD], 16);
+ ata_id_strcpy((u16 *) &pccb->pdata[32], &tmpid[ATA_ID_FW_REV], 4);
- dump_ataid(ataid[port]);
+#ifdef DEBUG
+ ata_dump_id(tmpid);
+#endif
return 0;
}
@@ -742,7 +723,7 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks);
- transfer_size = ATA_BLOCKSIZE * now_blocks;
+ transfer_size = ATA_SECT_SIZE * now_blocks;
if (transfer_size > user_buffer_size) {
printf("scsi_ahci: Error: buffer too small.\n");
return -EIO;
@@ -797,6 +778,7 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
static int ata_scsiop_read_capacity10(ccb *pccb)
{
u32 cap;
+ u64 cap64;
u32 block_size;
if (!ataid[pccb->target]) {
@@ -806,18 +788,11 @@ static int ata_scsiop_read_capacity10(ccb *pccb)
return -EPERM;
}
- cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
- if (cap == 0xfffffff) {
- unsigned short *cap48 = ataid[pccb->target]->lba48_capacity;
- if (cap48[2] || cap48[3]) {
- cap = 0xffffffff;
- } else {
- cap = (le16_to_cpu(cap48[1]) << 16) |
- (le16_to_cpu(cap48[0]));
- }
- }
+ cap64 = ata_id_n_sectors(ataid[pccb->target]);
+ if (cap64 > 0x100000000ULL)
+ cap64 = 0xffffffff;
- cap = cpu_to_be32(cap);
+ cap = cpu_to_be32(cap64);
memcpy(pccb->pdata, &cap, sizeof(cap));
block_size = cpu_to_be32((u32)512);
@@ -842,12 +817,7 @@ static int ata_scsiop_read_capacity16(ccb *pccb)
return -EPERM;
}
- cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
- if (cap == 0xfffffff) {
- memcpy(&cap, ataid[pccb->target]->lba48_capacity, sizeof(cap));
- cap = le64_to_cpu(cap);
- }
-
+ cap = ata_id_n_sectors(ataid[pccb->target]);
cap = cpu_to_be64(cap);
memcpy(pccb->pdata, &cap, sizeof(cap));
@@ -934,8 +904,6 @@ int ahci_init(u32 base)
int i, rc = 0;
u32 linkmap;
- memset(ataid, 0, sizeof(ataid));
-
probe_ent = malloc(sizeof(struct ahci_probe_ent));
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
diff --git a/include/ahci.h b/include/ahci.h
index babbdc6..16ef08f 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -120,29 +120,6 @@
#define AHCI_MAX_PORTS 32
-/* SETFEATURES stuff */
-#define SETFEATURES_XFER 0x03
-#define XFER_UDMA_7 0x47
-#define XFER_UDMA_6 0x46
-#define XFER_UDMA_5 0x45
-#define XFER_UDMA_4 0x44
-#define XFER_UDMA_3 0x43
-#define XFER_UDMA_2 0x42
-#define XFER_UDMA_1 0x41
-#define XFER_UDMA_0 0x40
-#define XFER_MW_DMA_2 0x22
-#define XFER_MW_DMA_1 0x21
-#define XFER_MW_DMA_0 0x20
-#define XFER_SW_DMA_2 0x12
-#define XFER_SW_DMA_1 0x11
-#define XFER_SW_DMA_0 0x10
-#define XFER_PIO_4 0x0C
-#define XFER_PIO_3 0x0B
-#define XFER_PIO_2 0x0A
-#define XFER_PIO_1 0x09
-#define XFER_PIO_0 0x08
-#define XFER_PIO_SLOW 0x00
-
#define ATA_FLAG_SATA (1 << 3)
#define ATA_FLAG_NO_LEGACY (1 << 4) /* no legacy mode check */
#define ATA_FLAG_MMIO (1 << 6) /* use MMIO, not PIO */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index d5f3c5f..a556783 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -334,6 +334,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
#define CONFIG_SATA_ULI5288
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
#define CONFIG_SYS_SCSI_MAX_LUN 1
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index d233365..b6f4e2e 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -554,6 +554,7 @@
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
#define CONFIG_SATA_ULI5288
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
#define CONFIG_SYS_SCSI_MAX_LUN 1
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index c619827..c48d76b 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -326,6 +326,7 @@
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
#define CONFIG_SATA_ULI5288
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
#define CONFIG_SYS_SCSI_MAX_LUN 1
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 2643097..f4206b2 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -429,6 +429,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
#define CONFIG_SATA_ULI5288
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
#define CONFIG_SYS_SCSI_MAX_LUN 1
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index a975ee1..f4d4bbc 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -527,6 +527,7 @@
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
#define CONFIG_SATA_ULI5288
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
#define CONFIG_SYS_SCSI_MAX_LUN 1
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index be04a75..f456744 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -72,6 +72,7 @@
#define CONFIG_SCSI_AHCI
#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
#define CONFIG_SYS_64BIT_LBA
#define CONFIG_SATA_INTEL 1
#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 62cc08c..123befd 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -46,6 +46,7 @@
#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c
#define CONFIG_MISC_INIT_R
+#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 5
--
1.8.1.2
next prev parent reply other threads:[~2013-05-21 22:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-21 22:44 [U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports Rob Herring
2013-05-21 22:44 ` [U-Boot] [PATCH 2/7] ahci: fix unaligned access Rob Herring
2013-05-24 13:45 ` Tom Rini
2013-05-24 18:35 ` Wolfgang Denk
2013-05-21 22:44 ` [U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry Rob Herring
2013-05-24 13:46 ` Tom Rini
2013-05-21 22:44 ` [U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function Rob Herring
2013-05-24 13:44 ` Tom Rini
2013-05-21 22:44 ` [U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up Rob Herring
2013-05-24 13:47 ` Tom Rini
2013-05-21 22:44 ` [U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec Rob Herring
2013-05-24 13:51 ` Tom Rini
2013-05-21 22:44 ` Rob Herring [this message]
2013-05-24 13:53 ` [U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions Tom Rini
2013-05-24 13:45 ` [U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369176276-1895-7-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox