public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
Date: Tue, 28 May 2013 17:34:26 -0500	[thread overview]
Message-ID: <1369780466.18630.23@snotra> (raw)
In-Reply-To: <B3A295C5BD5B13458B2F5C6AFAD910466FFF7C@039-SN2MPN1-023.039d.mgd.msft.net> (from B40530@freescale.com on Wed May 22 20:26:31 2013)

On 05/22/2013 08:26:31 PM, Zhang Ying-B40530 wrote:
> 
> 
> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Wednesday, May 22, 2013 11:46 PM
> To: Zhang Ying-B40530
> Cc: Wood Scott-B07421; u-boot at lists.denx.de; afleming at gmail.com; Xie  
> Xiaobo-R63061; Ilya Yanok
> Subject: Re: [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more  
> functionality
> 
> On 05/21/2013 09:15:08 PM, Zhang Ying-B40530 wrote:
> > > diff --git a/include/configs/MPC8313ERDB.h
> > > b/include/configs/MPC8313ERDB.h
> > > index c28dfe0..a2bdcff 100644
> > > --- a/include/configs/MPC8313ERDB.h
> > > +++ b/include/configs/MPC8313ERDB.h
> > > @@ -40,7 +40,9 @@
> > >  #define CONFIG_SPL_INIT_MINIMAL
> > >  #define CONFIG_SPL_SERIAL_SUPPORT
> > >  #define CONFIG_SPL_NAND_SUPPORT
> > > +#ifdef CONFIG_SPL_BUILD
> > >  #define CONFIG_SPL_NAND_MINIMAL
> > > +#endif
> > >  #define CONFIG_SPL_FLUSH_IMAGE
> > >  #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
> > >  #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
> > > diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
> > > index 8b13b10..5bdd44a 100644
> > > --- a/include/configs/P1022DS.h
> > > +++ b/include/configs/P1022DS.h
> > > @@ -41,7 +41,9 @@
> > >  #define CONFIG_SPL_INIT_MINIMAL
> > >  #define CONFIG_SPL_SERIAL_SUPPORT
> > >  #define CONFIG_SPL_NAND_SUPPORT
> > > +#ifdef CONFIG_SPL_BUILD
> > >  #define CONFIG_SPL_NAND_MINIMAL
> > > +#endif
> > >  #define CONFIG_SPL_FLUSH_IMAGE
> > >  #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
> > >
> > > diff --git a/include/configs/p1_p2_rdb_pc.h
> > > b/include/configs/p1_p2_rdb_pc.h
> > > index 7ed634b..bc48d62 100644
> > > --- a/include/configs/p1_p2_rdb_pc.h
> > > +++ b/include/configs/p1_p2_rdb_pc.h
> > > @@ -159,7 +159,9 @@
> > >  #define CONFIG_SPL_INIT_MINIMAL
> > >  #define CONFIG_SPL_SERIAL_SUPPORT
> > >  #define CONFIG_SPL_NAND_SUPPORT
> > > +#ifdef CONFIG_SPL_BUILD
> > >  #define CONFIG_SPL_NAND_MINIMAL
> > > +#endif
> > >  #define CONFIG_SPL_FLUSH_IMAGE
> > >  #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
> >
> > Are you sure this belongs in this patch?
> > [Zhang Ying]
> > Yes, it is necessary. Because CONFIG_SPL_NAND_MINIMAL has been used
> > in the file law.c and tlb.c in this patch.
> 
> What I mean is that it should probably have been done earlier, when  
> you
> introduced CONFIG_SPL_NAND_MINIMAL.
> [Zhang Ying]
> I can understand you mean. Because the symbol  
> "CONFIG_SPL_NAND_MINIMAL" has been useless, I think no need to split  
> out a separate patch.

OK, it looks like CONFIG_SPL_NAND_MINIMAL was there before your  
patchset.  I think that was an accidental left-over and should have  
been removed (it was replaced with CONFIG_SPL_NAND_DRIVERS, _BASE, and  
_ECC).

Could you describe what specifically you're using it to mean here?

-Scott

  reply	other threads:[~2013-05-28 22:34 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-20  6:07 [U-Boot] [PATCH 1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script ying.zhang at freescale.com
2013-05-20  6:07 ` [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS ying.zhang at freescale.com
2013-05-21 19:37   ` Scott Wood
2013-05-22  1:57     ` Zhang Ying-B40530
2013-05-20  6:07 ` [U-Boot] [PATCH 3/6] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL ying.zhang at freescale.com
2013-05-23 15:36   ` Tom Rini
2013-06-21 20:47   ` [U-Boot] [U-Boot, " Andy Fleming
2013-05-20  6:07 ` [U-Boot] [PATCH 4/6] Makefile: move the common makefile line to public area ying.zhang at freescale.com
2013-05-24 16:04   ` Tom Rini
2013-06-06  8:51     ` Zhang Ying-B40530
2013-06-06 13:41       ` Tom Rini
2013-06-21 20:48   ` [U-Boot] [U-Boot, " Andy Fleming
2013-05-20  6:07 ` [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality ying.zhang at freescale.com
2013-05-21 19:42   ` Scott Wood
2013-05-22  2:15     ` Zhang Ying-B40530
2013-05-22 15:45       ` Scott Wood
2013-05-23  1:26         ` Zhang Ying-B40530
2013-05-28 22:34           ` Scott Wood [this message]
2013-05-29  2:11             ` Zhang Ying-B40530
2013-05-29 22:54               ` Scott Wood
2013-05-24 16:07     ` Tom Rini
2013-05-24 16:11   ` Tom Rini
2013-05-24 19:08     ` Scott Wood
2013-05-24 19:18       ` Tom Rini
2013-05-27  7:43         ` Zhang Ying-B40530
2013-05-20  6:07 ` [U-Boot] [PATCH 6/6] powerpc/p1022ds: boot from SD Card with SPL ying.zhang at freescale.com
2013-05-23  2:29   ` Zhang Ying-B40530
2013-06-21 20:46 ` [U-Boot] [U-Boot, 1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script Andy Fleming

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369780466.18630.23@snotra \
    --to=scottwood@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox