From mboxrd@z Thu Jan 1 00:00:00 1970 From: Scott Wood Date: Tue, 28 May 2013 17:34:26 -0500 Subject: [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality In-Reply-To: (from B40530@freescale.com on Wed May 22 20:26:31 2013) Message-ID: <1369780466.18630.23@snotra> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/22/2013 08:26:31 PM, Zhang Ying-B40530 wrote: > > > -----Original Message----- > From: Wood Scott-B07421 > Sent: Wednesday, May 22, 2013 11:46 PM > To: Zhang Ying-B40530 > Cc: Wood Scott-B07421; u-boot at lists.denx.de; afleming at gmail.com; Xie > Xiaobo-R63061; Ilya Yanok > Subject: Re: [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more > functionality > > On 05/21/2013 09:15:08 PM, Zhang Ying-B40530 wrote: > > > diff --git a/include/configs/MPC8313ERDB.h > > > b/include/configs/MPC8313ERDB.h > > > index c28dfe0..a2bdcff 100644 > > > --- a/include/configs/MPC8313ERDB.h > > > +++ b/include/configs/MPC8313ERDB.h > > > @@ -40,7 +40,9 @@ > > > #define CONFIG_SPL_INIT_MINIMAL > > > #define CONFIG_SPL_SERIAL_SUPPORT > > > #define CONFIG_SPL_NAND_SUPPORT > > > +#ifdef CONFIG_SPL_BUILD > > > #define CONFIG_SPL_NAND_MINIMAL > > > +#endif > > > #define CONFIG_SPL_FLUSH_IMAGE > > > #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" > > > #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND > > > diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h > > > index 8b13b10..5bdd44a 100644 > > > --- a/include/configs/P1022DS.h > > > +++ b/include/configs/P1022DS.h > > > @@ -41,7 +41,9 @@ > > > #define CONFIG_SPL_INIT_MINIMAL > > > #define CONFIG_SPL_SERIAL_SUPPORT > > > #define CONFIG_SPL_NAND_SUPPORT > > > +#ifdef CONFIG_SPL_BUILD > > > #define CONFIG_SPL_NAND_MINIMAL > > > +#endif > > > #define CONFIG_SPL_FLUSH_IMAGE > > > #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" > > > > > > diff --git a/include/configs/p1_p2_rdb_pc.h > > > b/include/configs/p1_p2_rdb_pc.h > > > index 7ed634b..bc48d62 100644 > > > --- a/include/configs/p1_p2_rdb_pc.h > > > +++ b/include/configs/p1_p2_rdb_pc.h > > > @@ -159,7 +159,9 @@ > > > #define CONFIG_SPL_INIT_MINIMAL > > > #define CONFIG_SPL_SERIAL_SUPPORT > > > #define CONFIG_SPL_NAND_SUPPORT > > > +#ifdef CONFIG_SPL_BUILD > > > #define CONFIG_SPL_NAND_MINIMAL > > > +#endif > > > #define CONFIG_SPL_FLUSH_IMAGE > > > #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" > > > > Are you sure this belongs in this patch? > > [Zhang Ying] > > Yes, it is necessary. Because CONFIG_SPL_NAND_MINIMAL has been used > > in the file law.c and tlb.c in this patch. > > What I mean is that it should probably have been done earlier, when > you > introduced CONFIG_SPL_NAND_MINIMAL. > [Zhang Ying] > I can understand you mean. Because the symbol > "CONFIG_SPL_NAND_MINIMAL" has been useless, I think no need to split > out a separate patch. OK, it looks like CONFIG_SPL_NAND_MINIMAL was there before your patchset. I think that was an accidental left-over and should have been removed (it was replaced with CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC). Could you describe what specifically you're using it to mean here? -Scott