[U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality

[Scott Wood <scottwood@freescale.com>]

On 05/28/2013 09:11:17 PM, Zhang Ying-B40530 wrote:
> 
> 
> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Wednesday, May 29, 2013 6:34 AM
> To: Zhang Ying-B40530
> Cc: Wood Scott-B07421; u-boot at lists.denx.de; afleming at gmail.com; Xie  
> Xiaobo-R63061; Ilya Yanok
> Subject: Re: [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more  
> functionality
> 
> On 05/22/2013 08:26:31 PM, Zhang Ying-B40530 wrote:
> >
> >
> > -----Original Message-----
> > From: Wood Scott-B07421
> > Sent: Wednesday, May 22, 2013 11:46 PM
> > To: Zhang Ying-B40530
> > Cc: Wood Scott-B07421; u-boot at lists.denx.de; afleming at gmail.com; Xie
> > Xiaobo-R63061; Ilya Yanok
> > Subject: Re: [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more
> > functionality
> >
> > On 05/21/2013 09:15:08 PM, Zhang Ying-B40530 wrote:
> > > > diff --git a/include/configs/MPC8313ERDB.h
> > > > b/include/configs/MPC8313ERDB.h
> > > > index c28dfe0..a2bdcff 100644
> > > > --- a/include/configs/MPC8313ERDB.h
> > > > +++ b/include/configs/MPC8313ERDB.h
> > > > @@ -40,7 +40,9 @@
> > > >  #define CONFIG_SPL_INIT_MINIMAL
> > > >  #define CONFIG_SPL_SERIAL_SUPPORT
> > > >  #define CONFIG_SPL_NAND_SUPPORT
> > > > +#ifdef CONFIG_SPL_BUILD
> > > >  #define CONFIG_SPL_NAND_MINIMAL
> > > > +#endif
> > > >  #define CONFIG_SPL_FLUSH_IMAGE
> > > >  #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
> > > >  #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
> > > > diff --git a/include/configs/P1022DS.h  
> b/include/configs/P1022DS.h
> > > > index 8b13b10..5bdd44a 100644
> > > > --- a/include/configs/P1022DS.h
> > > > +++ b/include/configs/P1022DS.h
> > > > @@ -41,7 +41,9 @@
> > > >  #define CONFIG_SPL_INIT_MINIMAL
> > > >  #define CONFIG_SPL_SERIAL_SUPPORT
> > > >  #define CONFIG_SPL_NAND_SUPPORT
> > > > +#ifdef CONFIG_SPL_BUILD
> > > >  #define CONFIG_SPL_NAND_MINIMAL
> > > > +#endif
> > > >  #define CONFIG_SPL_FLUSH_IMAGE
> > > >  #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
> > > >
> > > > diff --git a/include/configs/p1_p2_rdb_pc.h
> > > > b/include/configs/p1_p2_rdb_pc.h
> > > > index 7ed634b..bc48d62 100644
> > > > --- a/include/configs/p1_p2_rdb_pc.h
> > > > +++ b/include/configs/p1_p2_rdb_pc.h
> > > > @@ -159,7 +159,9 @@
> > > >  #define CONFIG_SPL_INIT_MINIMAL
> > > >  #define CONFIG_SPL_SERIAL_SUPPORT
> > > >  #define CONFIG_SPL_NAND_SUPPORT
> > > > +#ifdef CONFIG_SPL_BUILD
> > > >  #define CONFIG_SPL_NAND_MINIMAL
> > > > +#endif
> > > >  #define CONFIG_SPL_FLUSH_IMAGE
> > > >  #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
> > >
> > > Are you sure this belongs in this patch?
> > > [Zhang Ying]
> > > Yes, it is necessary. Because CONFIG_SPL_NAND_MINIMAL has been  
> used
> > > in the file law.c and tlb.c in this patch.
> >
> > What I mean is that it should probably have been done earlier, when
> > you
> > introduced CONFIG_SPL_NAND_MINIMAL.
> > [Zhang Ying]
> > I can understand you mean. Because the symbol
> > "CONFIG_SPL_NAND_MINIMAL" has been useless, I think no need to split
> > out a separate patch.
> 
> OK, it looks like CONFIG_SPL_NAND_MINIMAL was there before your
> patchset.  I think that was an accidental left-over and should have
> been removed (it was replaced with CONFIG_SPL_NAND_DRIVERS, _BASE, and
> _ECC).
> 
> Could you describe what specifically you're using it to mean here?
> [Zhang Ying]
> CONFIG_SPL_NAND_MINIMAL is effective only for mpc85xx NAND SPL.

No, it's just a mistake that should be removed.  It doesn't mean  
anything.  There are other SPL targets that use minimal NAND drivers  
(e.g. mxc_nand_spl.c) that don't define this.

-Scott