* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
[not found] <158709369.126474.1369301672221.JavaMail.root@gnuside.com>
@ 2013-05-23 9:52 ` Jérôme Arzel
2013-05-24 20:13 ` Scott Wood
2013-05-31 18:20 ` Scott Wood
0 siblings, 2 replies; 6+ messages in thread
From: Jérôme Arzel @ 2013-05-23 9:52 UTC (permalink / raw)
To: u-boot
Hi all,
I have an issue when I compile U-Boot for my target machine (P1022DS, 36-bit).
Here is the error message:
release.S: Assembler messages:
release.S:154: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff)
release.S:286: Error: operand out of range (0xfffff144 is not between 0x00000000 and 0x0000ffff)
release.S:311: Error: operand out of range (0xfffff140 is not between 0x00000000 and 0x0000ffff)
(release.S is located to arch/powerpc/cpu/mpc85xx/release.S)
And here is the code for the first error (line 150):
#define toreset(x) (x - __secondary_start_page + 0xfffff000)
/* get our PIR to figure out our table entry */
lis r3,toreset(__spin_table_addr)@h
ori r3,r3,toreset(__spin_table_addr)@l
I don't really know why it doesn't work, but I think
that "ori" is inappropried, the immediate value must be a 16-bit value.
I use GCC 4.7.3, compiled in x86_64 for target powerpc-none-linux-gnuspe.
My U-Boot come from the repository, but older versions fail too.
Thanks for your help,
J?r?me
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
2013-05-23 9:52 ` [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel
@ 2013-05-24 20:13 ` Scott Wood
2013-05-27 9:25 ` Jérôme Arzel
2013-05-31 18:20 ` Scott Wood
1 sibling, 1 reply; 6+ messages in thread
From: Scott Wood @ 2013-05-24 20:13 UTC (permalink / raw)
To: u-boot
On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote:
> Hi all,
>
> I have an issue when I compile U-Boot for my target machine (P1022DS,
> 36-bit).
> Here is the error message:
>
> release.S: Assembler messages:
> release.S:154: Error: operand out of range (0xfffff144 is not between
> 0x00000000 and 0x0000ffff)
> release.S:286: Error: operand out of range (0xfffff144 is not between
> 0x00000000 and 0x0000ffff)
> release.S:311: Error: operand out of range (0xfffff140 is not between
> 0x00000000 and 0x0000ffff)
>
> (release.S is located to arch/powerpc/cpu/mpc85xx/release.S)
>
> And here is the code for the first error (line 150):
>
> #define toreset(x) (x - __secondary_start_page + 0xfffff000)
>
> /* get our PIR to figure out our table entry */
> lis r3,toreset(__spin_table_addr)@h
> ori r3,r3,toreset(__spin_table_addr)@l
>
> I don't really know why it doesn't work, but I think
> that "ori" is inappropried, the immediate value must be a 16-bit
> value.
The @l means take the low 16 bits of the constant. Likewise, the @h in
the lis takes the upper 16 bits.
Could you try to see what that instruction looks like after the
preprocessor stage (i.e. use -E rather than -c in gcc)?
> I use GCC 4.7.3, compiled in x86_64 for target
> powerpc-none-linux-gnuspe.
> My U-Boot come from the repository, but older versions fail too.
It builds OK for me with GCC 4.7.2.
-Scott
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
2013-05-24 20:13 ` Scott Wood
@ 2013-05-27 9:25 ` Jérôme Arzel
2013-05-28 15:14 ` Jérôme Arzel
0 siblings, 1 reply; 6+ messages in thread
From: Jérôme Arzel @ 2013-05-27 9:25 UTC (permalink / raw)
To: u-boot
On 05/24/2013 10:13:55 PM, Scott Wood wrote:
>
> On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote:
> > Hi all,
> >
> > I have an issue when I compile U-Boot for my target machine
> > (P1022DS,
> > 36-bit).
> > Here is the error message:
> >
> > release.S: Assembler messages:
> > release.S:154: Error: operand out of range (0xfffff144 is not
> > between
> > 0x00000000 and 0x0000ffff)
> > release.S:286: Error: operand out of range (0xfffff144 is not
> > between
> > 0x00000000 and 0x0000ffff)
> > release.S:311: Error: operand out of range (0xfffff140 is not
> > between
> > 0x00000000 and 0x0000ffff)
> >
> > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S)
> >
> > And here is the code for the first error (line 150):
> >
> > #define toreset(x) (x - __secondary_start_page + 0xfffff000)
> >
> > /* get our PIR to figure out our table entry */
> > lis r3,toreset(__spin_table_addr)@h
> > ori r3,r3,toreset(__spin_table_addr)@l
> >
> > I don't really know why it doesn't work, but I think
> > that "ori" is inappropried, the immediate value must be a 16-bit
> > value.
>
> The @l means take the low 16 bits of the constant. Likewise, the @h
> in
> the lis takes the upper 16 bits.
>
> Could you try to see what that instruction looks like after the
> preprocessor stage (i.e. use -E rather than -c in gcc)?
>
OK, I tried and unsurprisingly it's:
lis 3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@h
ori 3,3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@l
lwz 3,0(3)
If the @l takes the low 16 bits of
(__spin_table_addr - __secondary_start_page + 0xfffff000), so
the immediate value should not be 0xfffff144, but 0xf144.
The error is maybe in GCC...
J?r?me
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
2013-05-27 9:25 ` Jérôme Arzel
@ 2013-05-28 15:14 ` Jérôme Arzel
0 siblings, 0 replies; 6+ messages in thread
From: Jérôme Arzel @ 2013-05-28 15:14 UTC (permalink / raw)
To: u-boot
On 05/27/2013 11:25:17 AM, J?r?me Arzel wrote:
>
> On 05/24/2013 10:13:55 PM, Scott Wood wrote:
> >
> > On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote:
> > > Hi all,
> > >
> > > I have an issue when I compile U-Boot for my target machine
> > > (P1022DS,
> > > 36-bit).
> > > Here is the error message:
> > >
> > > release.S: Assembler messages:
> > > release.S:154: Error: operand out of range (0xfffff144 is not
> > > between
> > > 0x00000000 and 0x0000ffff)
> > > release.S:286: Error: operand out of range (0xfffff144 is not
> > > between
> > > 0x00000000 and 0x0000ffff)
> > > release.S:311: Error: operand out of range (0xfffff140 is not
> > > between
> > > 0x00000000 and 0x0000ffff)
> > >
> > > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S)
> > >
> > > And here is the code for the first error (line 150):
> > >
> > > #define toreset(x) (x - __secondary_start_page + 0xfffff000)
> > >
> > > /* get our PIR to figure out our table entry */
> > > lis r3,toreset(__spin_table_addr)@h
> > > ori r3,r3,toreset(__spin_table_addr)@l
> > >
> > > I don't really know why it doesn't work, but I think
> > > that "ori" is inappropried, the immediate value must be a 16-bit
> > > value.
> >
> > The @l means take the low 16 bits of the constant. Likewise, the
> > @h
> > in
> > the lis takes the upper 16 bits.
> >
> > Could you try to see what that instruction looks like after the
> > preprocessor stage (i.e. use -E rather than -c in gcc)?
> >
>
> OK, I tried and unsurprisingly it's:
>
> lis 3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@h
> ori 3,3,(__spin_table_addr - __secondary_start_page + 0xfffff000)@l
> lwz 3,0(3)
>
> If the @l takes the low 16 bits of
> (__spin_table_addr - __secondary_start_page + 0xfffff000), so
> the immediate value should not be 0xfffff144, but 0xf144.
> The error is maybe in GCC...
>
>
> J?r?me
In fact my tests was in a virtual machine.
I restarted the compilation of GCC from scratch, directly
on my machine (x86_64) and the result is slightly different,
but almost the same:
powerpc-e500v2-linux-gnuspe-gcc -D__ASSEMBLY__ -g -Os \
-fpic -mrelocatable -ffunction-sections -fdata-sections \
-meabi -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x11000000 \
-I/home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/include2 \
-I/home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/include \
-I/home/arzel/u-boot/u-boot-git/include -fno-builtin \
-ffreestanding -nostdinc \
-isystem /home/arzel/cross_compile/tools/lib/gcc/powerpc-
e500v2-linux-gnuspe/4.8.0/include \
-pipe -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 \
-msoft-float -mno-string -mspe=yes -mno-spe \
-o /home/arzel/u-boot/u-boot-git/P1022DS_SDCARD/
arch/powerpc/cpu/mpc85xx/release.o release.S -c
release.S: Assembler messages:
release.S:153: Error: value of 4294963524 too large for field
of 2 bytes at 170
release.S:154: Error: operand out of range (0xfffffffffffff144
is not between 0x0000000000000000 and 0x000000000000ffff)
release.S:154: Error: value of 4294963524 too large for field
of 2 bytes at 174
release.S:282: Error: value of 4294963524 too large for field
of 2 bytes at 206
release.S:283: Error: operand out of range (0xfffffffffffff144
is not between 0x0000000000000000 and 0x000000000000ffff)
release.S:283: Error: value of 4294963524 too large for field
of 2 bytes at 210
release.S:307: Error: value of 4294963520 too large for field
of 2 bytes at 278
release.S:308: Error: operand out of range (0xfffffffffffff140
is not between 0x0000000000000000 and 0x000000000000ffff)
release.S:308: Error: value of 4294963520 too large for field
of 2 bytes at 282
By curiosity, I tried to replace "toreset(__spin_table_addr)"
by "0xfffffffffffff144" and it works... but it's not a
solution.
I use the last version of U-Boot from the git branch 'master'.
Here is my configuration for GCC:
export PATH=/home/arzel/cross_compile/tools/bin:$PATH
Binutils (v2.23.2)
configure --target=powerpc-e500v2-linux-gnuspe \
--prefix=/home/arzel/cross_compile/tools \
--with-sysroot=/home/home/arzel/cross_compile/sysroot \
--disable-nls --disable-multilib
make all
make install
GCC (v4.8.0)
configure --target=powerpc-e500v2-linux-gnuspe \
--prefix=/home/arzel/cross_compile/tools \
--with-sysroot=/home/arzel/cross_compile/sysroot \
--without-headers --with-newlib --disable-shared \
--disable-threads --enable-languages=c \
--disable-decimal-float --disable-__cxa_atexit \
--disable-libquadmath --disable-libssp \
--disable-libgomp --disable-libmudflap \
--disable-nls --disable-multilib \
--enable-e500_double --with-long-double-128 \
--with-cpu=8548
make all-host all-target-libgcc
make install-host install-target-libgcc
Normally, I can build U-Boot with this small GCC.
J?r?me
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
2013-05-23 9:52 ` [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel
2013-05-24 20:13 ` Scott Wood
@ 2013-05-31 18:20 ` Scott Wood
2013-06-04 9:08 ` Jérôme Arzel
1 sibling, 1 reply; 6+ messages in thread
From: Scott Wood @ 2013-05-31 18:20 UTC (permalink / raw)
To: u-boot
On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote:
> Hi all,
>
> I have an issue when I compile U-Boot for my target machine (P1022DS,
> 36-bit).
> Here is the error message:
>
> release.S: Assembler messages:
> release.S:154: Error: operand out of range (0xfffff144 is not between
> 0x00000000 and 0x0000ffff)
> release.S:286: Error: operand out of range (0xfffff144 is not between
> 0x00000000 and 0x0000ffff)
> release.S:311: Error: operand out of range (0xfffff140 is not between
> 0x00000000 and 0x0000ffff)
>
> (release.S is located to arch/powerpc/cpu/mpc85xx/release.S)
>
> And here is the code for the first error (line 150):
>
> #define toreset(x) (x - __secondary_start_page + 0xfffff000)
>
> /* get our PIR to figure out our table entry */
> lis r3,toreset(__spin_table_addr)@h
> ori r3,r3,toreset(__spin_table_addr)@l
>
> I don't really know why it doesn't work, but I think
> that "ori" is inappropried, the immediate value must be a 16-bit
> value.
>
> I use GCC 4.7.3, compiled in x86_64 for target
> powerpc-none-linux-gnuspe.
> My U-Boot come from the repository, but older versions fail too.
This appears to be a binutils bug, introduced in 2.23.2. The attached
test program gives a similar error on 2.23.2, but 2.23.1 is OK.
I've filed it here: http://sourceware.org/bugzilla/show_bug.cgi?id=15557
-Scott
-------------- next part --------------
ori 3,3,(y-x+0x8000)@l
x:
y:
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range
2013-05-31 18:20 ` Scott Wood
@ 2013-06-04 9:08 ` Jérôme Arzel
0 siblings, 0 replies; 6+ messages in thread
From: Jérôme Arzel @ 2013-06-04 9:08 UTC (permalink / raw)
To: u-boot
Binutils 2.23.1 and the patch(es) for 2.23.2 work well.
Thank you for your help.
J?r?me
On 05/31/2013 08:20:00 PM, Scott Wood wrote:
>
> On 05/23/2013 04:52:26 AM, J?r?me Arzel wrote:
> > Hi all,
> >
> > I have an issue when I compile U-Boot for my target machine
> > (P1022DS,
> > 36-bit).
> > Here is the error message:
> >
> > release.S: Assembler messages:
> > release.S:154: Error: operand out of range (0xfffff144 is not
> > between
> > 0x00000000 and 0x0000ffff)
> > release.S:286: Error: operand out of range (0xfffff144 is not
> > between
> > 0x00000000 and 0x0000ffff)
> > release.S:311: Error: operand out of range (0xfffff140 is not
> > between
> > 0x00000000 and 0x0000ffff)
> >
> > (release.S is located to arch/powerpc/cpu/mpc85xx/release.S)
> >
> > And here is the code for the first error (line 150):
> >
> > #define toreset(x) (x - __secondary_start_page + 0xfffff000)
> >
> > /* get our PIR to figure out our table entry */
> > lis r3,toreset(__spin_table_addr)@h
> > ori r3,r3,toreset(__spin_table_addr)@l
> >
> > I don't really know why it doesn't work, but I think
> > that "ori" is inappropried, the immediate value must be a 16-bit
> > value.
> >
> > I use GCC 4.7.3, compiled in x86_64 for target
> > powerpc-none-linux-gnuspe.
> > My U-Boot come from the repository, but older versions fail too.
>
> This appears to be a binutils bug, introduced in 2.23.2. The
> attached
> test program gives a similar error on 2.23.2, but 2.23.1 is OK.
>
> I've filed it here:
> http://sourceware.org/bugzilla/show_bug.cgi?id=15557
>
> -Scott
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-06-04 9:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <158709369.126474.1369301672221.JavaMail.root@gnuside.com>
2013-05-23 9:52 ` [U-Boot] powerpc/mpc8xxx failed to compile: operand out of range Jérôme Arzel
2013-05-24 20:13 ` Scott Wood
2013-05-27 9:25 ` Jérôme Arzel
2013-05-28 15:14 ` Jérôme Arzel
2013-05-31 18:20 ` Scott Wood
2013-06-04 9:08 ` Jérôme Arzel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox