From: Axel Lin <axel.lin@ingics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
Date: Fri, 21 Jun 2013 18:54:25 +0800 [thread overview]
Message-ID: <1371812065.25258.1.camel@phoenix> (raw)
The omap_gpio driver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs.
These SoCs have different gpio count but currently omap_gpio driver uses hard
coded 192 which is wrong.
This patch fixes this issue by:
1. Move define of OMAP_MAX_GPIO to all arch/arm/include/asm/arch-omap*/gpio.h.
2. Update gpio bank settings and enable GPIO modules 7 & 8 clocks for OMAP5.
Thanks for Lubomir Popov to provide valuable comments to fix this issue.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
This patch supersedes below patches:
[PATCH v3 1/2] gpio: omap_gpio: Fix valid gpio range for AM33XX [1]
[PATCH v3 2/2] gpio: omap_gpio: Fix valid GPIO range for OMAP5 [2]
[PATCH 1/2] OMAP5: Fix gpio_bank_54xx setting [3]
[PATCH 2/2] OMAP: gpio: Introduce get_omap_gpio_count() function to get gpio count [4]
[1] http://lists.denx.de/pipermail/u-boot/2013-June/156980.html
[2] http://lists.denx.de/pipermail/u-boot/2013-June/156981.html
[3] http://lists.denx.de/pipermail/u-boot/2013-June/156984.html
[4] http://lists.denx.de/pipermail/u-boot/2013-June/156985.html
Regards,
Axel
arch/arm/cpu/armv7/omap5/hw_data.c | 2 ++
arch/arm/cpu/armv7/omap5/hwinit.c | 4 +++-
arch/arm/include/asm/arch-am33xx/gpio.h | 2 ++
arch/arm/include/asm/arch-omap3/gpio.h | 2 ++
arch/arm/include/asm/arch-omap4/gpio.h | 2 ++
arch/arm/include/asm/arch-omap5/gpio.h | 4 ++++
drivers/gpio/omap_gpio.c | 2 +-
7 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 56cf1f8..07b1108 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -412,6 +412,8 @@ void enable_basic_clocks(void)
(*prcm)->cm_l4per_gpio4_clkctrl,
(*prcm)->cm_l4per_gpio5_clkctrl,
(*prcm)->cm_l4per_gpio6_clkctrl,
+ (*prcm)->cm_l4per_gpio7_clkctrl,
+ (*prcm)->cm_l4per_gpio8_clkctrl,
0
};
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index daf124e..11ba36b 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -43,13 +43,15 @@ DECLARE_GLOBAL_DATA_PTR;
u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
-static struct gpio_bank gpio_bank_54xx[6] = {
+static struct gpio_bank gpio_bank_54xx[8] = {
{ (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO7_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO8_BASE, METHOD_GPIO_24XX },
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h
index 1a211e9..8346979 100644
--- a/arch/arm/include/asm/arch-am33xx/gpio.h
+++ b/arch/arm/include/asm/arch-am33xx/gpio.h
@@ -21,6 +21,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 128
+
#define AM33XX_GPIO0_BASE 0x44E07000
#define AM33XX_GPIO1_BASE 0x4804C000
#define AM33XX_GPIO2_BASE 0x481AC000
diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h
index 8bba3b0..d72f5e5 100644
--- a/arch/arm/include/asm/arch-omap3/gpio.h
+++ b/arch/arm/include/asm/arch-omap3/gpio.h
@@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 192
+
#define OMAP34XX_GPIO1_BASE 0x48310000
#define OMAP34XX_GPIO2_BASE 0x49050000
#define OMAP34XX_GPIO3_BASE 0x49052000
diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h
index 26f19d1..fdf65ed 100644
--- a/arch/arm/include/asm/arch-omap4/gpio.h
+++ b/arch/arm/include/asm/arch-omap4/gpio.h
@@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 192
+
#define OMAP44XX_GPIO1_BASE 0x4A310000
#define OMAP44XX_GPIO2_BASE 0x48055000
#define OMAP44XX_GPIO3_BASE 0x48057000
diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h
index c14dff0..7c82f90 100644
--- a/arch/arm/include/asm/arch-omap5/gpio.h
+++ b/arch/arm/include/asm/arch-omap5/gpio.h
@@ -40,11 +40,15 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 256
+
#define OMAP54XX_GPIO1_BASE 0x4Ae10000
#define OMAP54XX_GPIO2_BASE 0x48055000
#define OMAP54XX_GPIO3_BASE 0x48057000
#define OMAP54XX_GPIO4_BASE 0x48059000
#define OMAP54XX_GPIO5_BASE 0x4805B000
#define OMAP54XX_GPIO6_BASE 0x4805D000
+#define OMAP54XX_GPIO7_BASE 0x48051000
+#define OMAP54XX_GPIO8_BASE 0x48053000
#endif /* _GPIO_OMAP5_H */
diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
index a30d7f0..f16e9ae 100644
--- a/drivers/gpio/omap_gpio.c
+++ b/drivers/gpio/omap_gpio.c
@@ -55,7 +55,7 @@ static inline int get_gpio_index(int gpio)
int gpio_is_valid(int gpio)
{
- return (gpio >= 0) && (gpio < 192);
+ return (gpio >= 0) && (gpio < OMAP_MAX_GPIO);
}
static int check_gpio(int gpio)
--
1.8.1.2
next reply other threads:[~2013-06-21 10:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 10:54 Axel Lin [this message]
2013-06-21 12:29 ` [U-Boot] [PATCH] ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5 Lubomir Popov
2013-06-24 19:34 ` Heiko Schocher
2013-07-02 20:07 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371812065.25258.1.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox