[U-Boot] [PATCH v5 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114

[Jim Lin <jilin@nvidia.com>]

Add DT node for USB EHCI function.
Add support for T30-Cardhu, T30-Beaver, T114-Dalmore boards.

Signed-off-by: Jim Lin <jilin@nvidia.com>
---
Changes in v2:
 - Remove PLL parameters from dt file
Changes in v3:
 - Change VBus GPIO from H.05 to DD.04 for Beaver board.
Changes in v4:
 - Change Beaver VBus GPIO to H.05 and value to 0 for polarity to be High.
   I don't have Beaver board. So this needs somebody to help test.
   Thanks.
 - Change Cardhu VBus GPIO value from 3 to 1 because only bit 0 is meaningful.
Changes in v5:
 - Move changes on fdtdec.h and fdtdec.c to patch 2/3
 - Modify PHY type to hsic for USB2 port

 arch/arm/dts/tegra114.dtsi            |   27 +++++++++++++++++++++++++++
 arch/arm/dts/tegra30.dtsi             |   27 +++++++++++++++++++++++++++
 board/nvidia/dts/tegra114-dalmore.dts |    7 +++++++
 board/nvidia/dts/tegra30-beaver.dts   |    6 ++++++
 board/nvidia/dts/tegra30-cardhu.dts   |    6 ++++++
 5 files changed, 73 insertions(+), 0 deletions(-)

diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index f86d18d..626cc3c 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -216,4 +216,31 @@
 		clocks = <&tegra_car 15>;
 		status = "disable";
 	};
+
+	usb at 7d000000 {
+		compatible = "nvidia,tegra114-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <52>;
+		phy_type = "utmi";
+		clocks = <&tegra_car 22>;	/* PERIPH_ID_USBD */
+		status = "disabled";
+	};
+
+	usb at 7d004000 {
+		compatible = "nvidia,tegra114-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <53>;
+		phy_type = "hsic";
+		clocks = <&tegra_car 58>;	/* PERIPH_ID_USB2 */
+		status = "disabled";
+	};
+
+	usb at 7d008000 {
+		compatible = "nvidia,tegra114-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <129>;
+		phy_type = "utmi";
+		clocks = <&tegra_car 59>;	/* PERIPH_ID_USB3 */
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi
index ccf154f..fee1c36 100644
--- a/arch/arm/dts/tegra30.dtsi
+++ b/arch/arm/dts/tegra30.dtsi
@@ -216,4 +216,31 @@
 		clocks = <&tegra_car 15>;
 		status = "disabled";
 	};
+
+	usb at 7d000000 {
+		compatible = "nvidia,tegra30-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <52>;
+		phy_type = "utmi";
+		clocks = <&tegra_car 22>;	/* PERIPH_ID_USBD */
+		status = "disabled";
+	};
+
+	usb at 7d004000 {
+		compatible = "nvidia,tegra30-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <53>;
+		phy_type = "hsic";
+		clocks = <&tegra_car 58>;	/* PERIPH_ID_USB2 */
+		status = "disabled";
+	};
+
+	usb at 7d008000 {
+		compatible = "nvidia,tegra30-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <129>;
+		phy_type = "utmi";
+		clocks = <&tegra_car 59>;	/* PERIPH_ID_USB3 */
+		status = "disabled";
+	};
 };
diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts
index 86e9459..435c01e 100644
--- a/board/nvidia/dts/tegra114-dalmore.dts
+++ b/board/nvidia/dts/tegra114-dalmore.dts
@@ -14,6 +14,7 @@
 		i2c4 = "/i2c at 7000c700";
 		sdhci0 = "/sdhci at 78000600";
 		sdhci1 = "/sdhci at 78000400";
+		usb0 = "/usb at 7d008000";
 	};
 
 	memory {
@@ -61,4 +62,10 @@
 		bus-width = <8>;
 		status = "okay";
 	};
+
+	usb at 7d008000 {
+		/* SPDIF_IN: USB_VBUS_EN1 */
+		nvidia,vbus-gpio = <&gpio 86 0>;
+		status = "okay";
+	};
 };
diff --git a/board/nvidia/dts/tegra30-beaver.dts b/board/nvidia/dts/tegra30-beaver.dts
index 836169f..a7cc93e 100644
--- a/board/nvidia/dts/tegra30-beaver.dts
+++ b/board/nvidia/dts/tegra30-beaver.dts
@@ -14,6 +14,7 @@
 		i2c4 = "/i2c at 7000c700";
 		sdhci0 = "/sdhci at 78000600";
 		sdhci1 = "/sdhci at 78000000";
+		usb0 = "/usb at 7d008000";
 	};
 
 	memory {
@@ -68,4 +69,9 @@
 		status = "okay";
 		bus-width = <8>;
 	};
+
+	usb at 7d008000 {
+		nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
+		status = "okay";
+	};
 };
diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts
index 4d22b48..ea2cf76 100644
--- a/board/nvidia/dts/tegra30-cardhu.dts
+++ b/board/nvidia/dts/tegra30-cardhu.dts
@@ -14,6 +14,7 @@
 		i2c4 = "/i2c at 7000c700";
 		sdhci0 = "/sdhci at 78000600";
 		sdhci1 = "/sdhci at 78000000";
+		usb0 = "/usb at 7d008000";
 	};
 
 	memory {
@@ -63,4 +64,9 @@
 		status = "okay";
 		bus-width = <8>;
 	};
+
+	usb at 7d008000 {
+		nvidia,vbus-gpio = <&gpio 236 0>;	/* PDD4 */
+		status = "okay";
+	};
 };
-- 
1.7.7