* [U-Boot] [PATCH][v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
@ 2013-06-13 4:44 Prabhakar Kushwaha
2013-06-21 20:38 ` [U-Boot] [U-Boot, v2] " Andy Fleming
0 siblings, 1 reply; 9+ messages in thread
From: Prabhakar Kushwaha @ 2013-06-13 4:44 UTC (permalink / raw)
To: u-boot
init_tlbs() initialize all the TLB entries required for the system.
So disable DEBUG TLB entry before TLB entries initialization.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
changes for v2: Fixed checkpatch warning.
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index f4403c2..340b063 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -180,5 +180,9 @@ void cpu_init_early_f(void)
invalidate_tlb(1);
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD)
+ disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
+#endif
+
init_tlbs();
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-13 4:44 [U-Boot] [PATCH][v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs Prabhakar Kushwaha
@ 2013-06-21 20:38 ` Andy Fleming
2013-06-21 20:59 ` Scott Wood
0 siblings, 1 reply; 9+ messages in thread
From: Andy Fleming @ 2013-06-21 20:38 UTC (permalink / raw)
To: u-boot
On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha wrote:
> init_tlbs() initialize all the TLB entries required for the system.
>
> So disable DEBUG TLB entry before TLB entries initialization.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Applied, with fixes.
> diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> index f4403c2..340b063 100644
> --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
>
> invalidate_tlb(1);
>
> +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD)
> + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
> +#endif
Had to add CONFIG_NAND_SPL here, as well, just for future reference
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-21 20:38 ` [U-Boot] [U-Boot, v2] " Andy Fleming
@ 2013-06-21 20:59 ` Scott Wood
2013-06-21 21:05 ` Fleming Andy-AFLEMING
0 siblings, 1 reply; 9+ messages in thread
From: Scott Wood @ 2013-06-21 20:59 UTC (permalink / raw)
To: u-boot
On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha wrote:
> > init_tlbs() initialize all the TLB entries required for the system.
> >
> > So disable DEBUG TLB entry before TLB entries initialization.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>
> Applied, with fixes.
>
> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> > index f4403c2..340b063 100644
> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
> >
> > invalidate_tlb(1);
> >
> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
> !defined(CONFIG_SPL_BUILD)
> > + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
> > +#endif
>
> Had to add CONFIG_NAND_SPL here, as well, just for future reference
Why exclude all SPLs? Only minimal SPLs skip creating the debug TLB.
-Scott
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-21 20:59 ` Scott Wood
@ 2013-06-21 21:05 ` Fleming Andy-AFLEMING
2013-06-21 21:12 ` Scott Wood
0 siblings, 1 reply; 9+ messages in thread
From: Fleming Andy-AFLEMING @ 2013-06-21 21:05 UTC (permalink / raw)
To: u-boot
On Jun 21, 2013, at 3:59 PM, Scott Wood wrote:
> On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
>> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha wrote:
>> > init_tlbs() initialize all the TLB entries required for the system.
>> >
>> > So disable DEBUG TLB entry before TLB entries initialization.
>> >
>> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>> Applied, with fixes.
>> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>> > index f4403c2..340b063 100644
>> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
>> >
>> > invalidate_tlb(1);
>> >
>> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD)
>> > + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
>> > +#endif
>> Had to add CONFIG_NAND_SPL here, as well, just for future reference
>
> Why exclude all SPLs? Only minimal SPLs skip creating the debug TLB.
The definition of disable_tlb() is excluded when NAND_SPL is defined. It may be that the error lies the other way around, but this fixed my build problem.
Andy
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-21 21:05 ` Fleming Andy-AFLEMING
@ 2013-06-21 21:12 ` Scott Wood
2013-06-24 3:14 ` Prabhakar Kushwaha
0 siblings, 1 reply; 9+ messages in thread
From: Scott Wood @ 2013-06-21 21:12 UTC (permalink / raw)
To: u-boot
On 06/21/2013 04:05:37 PM, Fleming Andy-AFLEMING wrote:
>
> On Jun 21, 2013, at 3:59 PM, Scott Wood wrote:
>
> > On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
> >> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha wrote:
> >> > init_tlbs() initialize all the TLB entries required for the
> system.
> >> >
> >> > So disable DEBUG TLB entry before TLB entries initialization.
> >> >
> >> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> >> Applied, with fixes.
> >> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> >> > index f4403c2..340b063 100644
> >> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> >> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
> >> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
> >> >
> >> > invalidate_tlb(1);
> >> >
> >> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
> !defined(CONFIG_SPL_BUILD)
> >> > + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
> >> > +#endif
> >> Had to add CONFIG_NAND_SPL here, as well, just for future reference
> >
> > Why exclude all SPLs? Only minimal SPLs skip creating the debug
> TLB.
>
> The definition of disable_tlb() is excluded when NAND_SPL is defined.
I'm talking about new-SPL, not NAND_SPL. My comment is about the
original patch (I made the comment before internally), not your edit to
it.
-Scott
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-21 21:12 ` Scott Wood
@ 2013-06-24 3:14 ` Prabhakar Kushwaha
2013-06-24 6:17 ` Prabhakar Kushwaha
0 siblings, 1 reply; 9+ messages in thread
From: Prabhakar Kushwaha @ 2013-06-24 3:14 UTC (permalink / raw)
To: u-boot
On 06/22/2013 02:42 AM, Scott Wood wrote:
> On 06/21/2013 04:05:37 PM, Fleming Andy-AFLEMING wrote:
>>
>> On Jun 21, 2013, at 3:59 PM, Scott Wood wrote:
>>
>> > On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
>> >> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha wrote:
>> >> > init_tlbs() initialize all the TLB entries required for the system.
>> >> >
>> >> > So disable DEBUG TLB entry before TLB entries initialization.
>> >> >
>> >> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>> >> Applied, with fixes.
>> >> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>> b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>> >> > index f4403c2..340b063 100644
>> >> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>> >> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>> >> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
>> >> >
>> >> > invalidate_tlb(1);
>> >> >
>> >> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
>> !defined(CONFIG_SPL_BUILD)
>> >> > + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
>> >> > +#endif
>> >> Had to add CONFIG_NAND_SPL here, as well, just for future reference
>> >
>> > Why exclude all SPLs? Only minimal SPLs skip creating the debug TLB.
>>
>> The definition of disable_tlb() is excluded when NAND_SPL is defined.
>
> I'm talking about new-SPL, not NAND_SPL. My comment is about the
> original patch (I made the comment before internally), not your edit
> to it.
>
as per comment from Scott, we should have below define. It takes care of
SPL minimal + nand_spl
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
!defined(CONFIG_SPL_INIT_MINIMAL) && !defined(CONFIG_NAND_SPL)
May I resend this patch?
Regards,
Prabhakar
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-24 3:14 ` Prabhakar Kushwaha
@ 2013-06-24 6:17 ` Prabhakar Kushwaha
2013-06-24 17:41 ` Scott Wood
0 siblings, 1 reply; 9+ messages in thread
From: Prabhakar Kushwaha @ 2013-06-24 6:17 UTC (permalink / raw)
To: u-boot
On 06/24/2013 08:44 AM, Prabhakar Kushwaha wrote:
> On 06/22/2013 02:42 AM, Scott Wood wrote:
>> On 06/21/2013 04:05:37 PM, Fleming Andy-AFLEMING wrote:
>>>
>>> On Jun 21, 2013, at 3:59 PM, Scott Wood wrote:
>>>
>>> > On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
>>> >> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha wrote:
>>> >> > init_tlbs() initialize all the TLB entries required for the
>>> system.
>>> >> >
>>> >> > So disable DEBUG TLB entry before TLB entries initialization.
>>> >> >
>>> >> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>>> >> Applied, with fixes.
>>> >> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>> b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>> >> > index f4403c2..340b063 100644
>>> >> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>> >> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>> >> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
>>> >> >
>>> >> > invalidate_tlb(1);
>>> >> >
>>> >> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
>>> !defined(CONFIG_SPL_BUILD)
>>> >> > + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
>>> >> > +#endif
>>> >> Had to add CONFIG_NAND_SPL here, as well, just for future reference
>>> >
>>> > Why exclude all SPLs? Only minimal SPLs skip creating the debug TLB.
>>>
>>> The definition of disable_tlb() is excluded when NAND_SPL is defined.
>>
>> I'm talking about new-SPL, not NAND_SPL. My comment is about the
>> original patch (I made the comment before internally), not your edit
>> to it.
>>
> as per comment from Scott, we should have below define. It takes care
> of SPL minimal + nand_spl
>
> #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
> !defined(CONFIG_SPL_INIT_MINIMAL) && !defined(CONFIG_NAND_SPL)
>
> May I resend this patch?
>
>
just a afterthought, current modified* patch is correct i.e. " #if
defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD) &&
!defined(CONFIG_NAND_SPL)"
DEBUG TLB never been created for SPL & NAND_SPL so no need to disable.
Regards,
Prabhakar
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-24 6:17 ` Prabhakar Kushwaha
@ 2013-06-24 17:41 ` Scott Wood
2013-06-25 4:37 ` Prabhakar Kushwaha
0 siblings, 1 reply; 9+ messages in thread
From: Scott Wood @ 2013-06-24 17:41 UTC (permalink / raw)
To: u-boot
On 06/24/2013 01:17:11 AM, Prabhakar Kushwaha wrote:
> On 06/24/2013 08:44 AM, Prabhakar Kushwaha wrote:
>> On 06/22/2013 02:42 AM, Scott Wood wrote:
>>> On 06/21/2013 04:05:37 PM, Fleming Andy-AFLEMING wrote:
>>>>
>>>> On Jun 21, 2013, at 3:59 PM, Scott Wood wrote:
>>>>
>>>> > On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
>>>> >> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha
>>>> wrote:
>>>> >> > init_tlbs() initialize all the TLB entries required for the
>>>> system.
>>>> >> >
>>>> >> > So disable DEBUG TLB entry before TLB entries initialization.
>>>> >> >
>>>> >> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>>>> >> Applied, with fixes.
>>>> >> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>> b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>> >> > index f4403c2..340b063 100644
>>>> >> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>> >> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>> >> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
>>>> >> >
>>>> >> > invalidate_tlb(1);
>>>> >> >
>>>> >> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
>>>> !defined(CONFIG_SPL_BUILD)
>>>> >> > + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
>>>> >> > +#endif
>>>> >> Had to add CONFIG_NAND_SPL here, as well, just for future
>>>> reference
>>>> >
>>>> > Why exclude all SPLs? Only minimal SPLs skip creating the debug
>>>> TLB.
>>>>
>>>> The definition of disable_tlb() is excluded when NAND_SPL is
>>>> defined.
>>>
>>> I'm talking about new-SPL, not NAND_SPL. My comment is about the
>>> original patch (I made the comment before internally), not your
>>> edit to it.
>>>
>> as per comment from Scott, we should have below define. It takes
>> care of SPL minimal + nand_spl
>>
>> #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
>> !defined(CONFIG_SPL_INIT_MINIMAL) && !defined(CONFIG_NAND_SPL)
>>
>> May I resend this patch?
It would need to be:
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && \
!(defined(CONFIG_SPL_INIT_MINIMAL) &&
defined(CONFIG_SPL_BUILD)) && \
!defined(CONFIG_NAND_SPL)
> just a afterthought, current modified* patch is correct i.e. " #if
> defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD)
> && !defined(CONFIG_NAND_SPL)"
> DEBUG TLB never been created for SPL & NAND_SPL so no need to disable.
Why would the debug TLB not be created for a non-minimal-init SPL?
-Scott
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs
2013-06-24 17:41 ` Scott Wood
@ 2013-06-25 4:37 ` Prabhakar Kushwaha
0 siblings, 0 replies; 9+ messages in thread
From: Prabhakar Kushwaha @ 2013-06-25 4:37 UTC (permalink / raw)
To: u-boot
On 06/24/2013 11:11 PM, Scott Wood wrote:
> On 06/24/2013 01:17:11 AM, Prabhakar Kushwaha wrote:
>> On 06/24/2013 08:44 AM, Prabhakar Kushwaha wrote:
>>> On 06/22/2013 02:42 AM, Scott Wood wrote:
>>>> On 06/21/2013 04:05:37 PM, Fleming Andy-AFLEMING wrote:
>>>>>
>>>>> On Jun 21, 2013, at 3:59 PM, Scott Wood wrote:
>>>>>
>>>>> > On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
>>>>> >> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha
>>>>> wrote:
>>>>> >> > init_tlbs() initialize all the TLB entries required for the
>>>>> system.
>>>>> >> >
>>>>> >> > So disable DEBUG TLB entry before TLB entries initialization.
>>>>> >> >
>>>>> >> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>>>>> >> Applied, with fixes.
>>>>> >> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>>> b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>>> >> > index f4403c2..340b063 100644
>>>>> >> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>>> >> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>>>> >> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
>>>>> >> >
>>>>> >> > invalidate_tlb(1);
>>>>> >> >
>>>>> >> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
>>>>> !defined(CONFIG_SPL_BUILD)
>>>>> >> > + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
>>>>> >> > +#endif
>>>>> >> Had to add CONFIG_NAND_SPL here, as well, just for future
>>>>> reference
>>>>> >
>>>>> > Why exclude all SPLs? Only minimal SPLs skip creating the debug
>>>>> TLB.
>>>>>
>>>>> The definition of disable_tlb() is excluded when NAND_SPL is defined.
>>>>
>>>> I'm talking about new-SPL, not NAND_SPL. My comment is about the
>>>> original patch (I made the comment before internally), not your
>>>> edit to it.
>>>>
>>> as per comment from Scott, we should have below define. It takes
>>> care of SPL minimal + nand_spl
>>>
>>> #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) &&
>>> !defined(CONFIG_SPL_INIT_MINIMAL) && !defined(CONFIG_NAND_SPL)
>>>
>>> May I resend this patch?
>
> It would need to be:
>
> #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && \
> !(defined(CONFIG_SPL_INIT_MINIMAL) && defined(CONFIG_SPL_BUILD)) && \
> !defined(CONFIG_NAND_SPL)
>
>> just a afterthought, current modified* patch is correct i.e. " #if
>> defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD)
>> && !defined(CONFIG_NAND_SPL)"
>> DEBUG TLB never been created for SPL & NAND_SPL so no need to disable.
>
> Why would the debug TLB not be created for a non-minimal-init SPL?
>
Looks like my assumption is *wrong*. as per this define
#if defined(CONFIG_NAND_SPL) || \
(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL))
#define MINIMAL_SPL
#endif
MINIMAL_SPL is defined only with CONFIG_SPL_INIT_MINIMAL. for
MINIMAL_SPL interrupt vectors are never relocated. hence, no need of
DEBUG TLB entry.
for rest, interrupt vectors are relocated, so debug tlb entry is must.
I will post a patch upstream to fix this problem.
Thanks,
Prabhakar
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-06-25 4:37 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-06-13 4:44 [U-Boot] [PATCH][v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs Prabhakar Kushwaha
2013-06-21 20:38 ` [U-Boot] [U-Boot, v2] " Andy Fleming
2013-06-21 20:59 ` Scott Wood
2013-06-21 21:05 ` Fleming Andy-AFLEMING
2013-06-21 21:12 ` Scott Wood
2013-06-24 3:14 ` Prabhakar Kushwaha
2013-06-24 6:17 ` Prabhakar Kushwaha
2013-06-24 17:41 ` Scott Wood
2013-06-25 4:37 ` Prabhakar Kushwaha
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox