From: Chin Liang See <clsee@altera.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 1/1] socfpga: Adding configuration for development kit
Date: Mon, 1 Jul 2013 09:05:44 -0500 [thread overview]
Message-ID: <1372687544.12363.7.camel@drezykow-VirtualBox.altera.com> (raw)
In-Reply-To: <20130628224752.DD751380A60@gemini.denx.de>
socfpga: Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit
Signed-off-by: Chin Liang See <clsee@altera.com>
---
include/configs/socfpga_cyclone5.h | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/include/configs/socfpga_cyclone5.h
b/include/configs/socfpga_cyclone5.h
index 5633d2a..be3799b 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -22,6 +22,8 @@
/*
* High level configuration
*/
+/* Virtual target or real hardware */
+#define CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_ARMV7
#define CONFIG_L2_OFF
@@ -32,11 +34,12 @@
#define CONFIG_SINGLE_BOOTLOADER
#define CONFIG_SOCFPGA
+/* base address for .text section */
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TEXT_BASE 0x08000040
-#define V_NS16550_CLK 1000000
-#define CONFIG_BAUDRATE 57600
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_TIMER_CLOCK_KHZ 2400
+#else
+#define CONFIG_SYS_TEXT_BASE 0x01000040
+#endif
#define CONFIG_SYS_LOAD_ADDR 0x7fc0
/* Console I/O Buffer Size */
@@ -165,7 +168,7 @@
/* SDRAM Bank #1 */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* SDRAM memory size */
-#define PHYS_SDRAM_1_SIZE 0x80000000
+#define PHYS_SDRAM_1_SIZE 0x40000000
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_START 0x00000000
@@ -181,8 +184,13 @@
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_COM1 UART0_BASE
-
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,
115200}
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+#define V_NS16550_CLK 1000000
+#else
+#define V_NS16550_CLK 100000000
+#endif
+#define CONFIG_BAUDRATE 115200
/*
* FLASH
@@ -195,9 +203,15 @@
/* This timer use eosc1 where the clock frequency is fixed
* throughout any condition */
#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
-
/* reload value when timer count to zero */
#define TIMER_LOAD_VAL 0xFFFFFFFF
+/* Timer info */
+#define CONFIG_SYS_HZ 1000
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+#define CONFIG_TIMER_CLOCK_KHZ 2400
+#else
+#define CONFIG_TIMER_CLOCK_KHZ 25000
+#endif
#define CONFIG_ENV_IS_NOWHERE
--
1.7.9.5
prev parent reply other threads:[~2013-07-01 14:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAEM3b1DEZZBX2rm6c8ctR7TYz7X4OSUYucWdC+n7m4_9tKn+Xg@mail.gmail.com>
[not found] ` <0BB3B561D7068A4E89FD8E9ABFB538BEB3B2E44330@PG-ITMSG03.altera.priv.altera.com>
2013-06-27 13:26 ` [U-Boot] [PATCH1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit Chin Liang See
2013-06-28 11:22 ` Pavel Machek
2013-06-28 16:05 ` Chin Liang See
2013-06-28 16:09 ` Stefan Roese
2013-06-28 20:23 ` [U-Boot] [PATCH v2 1/1] " Chin Liang See
2013-06-28 22:47 ` Wolfgang Denk
2013-07-01 13:44 ` Chin Liang See
2013-07-01 14:05 ` Chin Liang See [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372687544.12363.7.camel@drezykow-VirtualBox.altera.com \
--to=clsee@altera.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox