From: Kuo-Jung Su <dantesu@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 02/12] video: add Faraday FTLCDC200 LCD controller support
Date: Thu, 4 Jul 2013 11:40:34 +0800 [thread overview]
Message-ID: <1372909244-25211-3-git-send-email-dantesu@gmail.com> (raw)
In-Reply-To: <1372909244-25211-1-git-send-email-dantesu@gmail.com>
From: Kuo-Jung Su <dantesu@faraday-tech.com>
Faraday FTLCDC200 Color LCD controller performs translation of
pixel-coded data into the required formats and timings to
drive a variety of single/dual mono and color LCDs.
Depending on the LCD type and mode, the unpacked data can represent:
1. an actual true display gray or color value
2. an address to a 256 x 16 bit wide palette RAM gray or color value.
The FTLCDC200 generates 4 individual interrupts for:
1. DMA FIFO underflow
2. base address update
3. vertical status
4. bus error.
There is also a single combined interrupt that is raised when any of
the individual interrupts become active.
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Albert Aribaud <albert.u.boot@aribaud.net>
CC: Anatolij Gustschin <agust@denx.de>
---
Changes for v6:
- Nothing updates
Changes for v5:
- Coding Style cleanup:
struct chip_regs __iomem *regs -> struct chip_regs *regs
- Chain it back to Faraday A360/A369 patch series, because
Faraday A369 depends on the header file of this patch
for I2C work-around.(Enable I2C clock to prevent I2C bus hangs)
Changes for v4:
- Nothing updates
Changes for v3:
- Nothing updates
Changes for v2:
- Make it a separate patch, rather then a part of
Faraday A36x patch series
drivers/video/Makefile | 1 +
drivers/video/ftlcdc200.c | 148 ++++++++++++++++++++++++++
drivers/video/ftlcdc200_panel.c | 221 +++++++++++++++++++++++++++++++++++++++
include/faraday/ftlcdc200.h | 179 +++++++++++++++++++++++++++++++
include/lcd.h | 33 ++++++
5 files changed, 582 insertions(+)
create mode 100644 drivers/video/ftlcdc200.c
create mode 100644 drivers/video/ftlcdc200_panel.c
create mode 100644 include/faraday/ftlcdc200.h
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 68ff34b..92ab9d1 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -35,6 +35,7 @@ COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
exynos_mipi_dsi_lowlevel.o
COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o
COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
+COBJS-$(CONFIG_FTLCDC200) += ftlcdc200.o ftlcdc200_panel.o
COBJS-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o
COBJS-$(CONFIG_PXA_LCD) += pxa_lcd.o
COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o
diff --git a/drivers/video/ftlcdc200.c b/drivers/video/ftlcdc200.c
new file mode 100644
index 0000000..331a35f
--- /dev/null
+++ b/drivers/video/ftlcdc200.c
@@ -0,0 +1,148 @@
+/*
+ * Faraday LCD Controller
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <lcd.h>
+#include <faraday/ftlcdc200.h>
+
+#ifndef CONFIG_FTLCDC200_FREQ
+#define CONFIG_FTLCDC200_FREQ clock_get_rate(AHB_CLK)
+#endif
+
+static struct ftlcdc200_regs *regs = (void __iomem *)CONFIG_FTLCDC200_BASE;
+
+static void ftlcdc2xx_fixup(struct vidinfo *panel)
+{
+ u_long ht, vt;
+ u_long div, clk;
+ long fps = 60;
+ long upper = 32767;
+ long lower = -32767;
+
+ if (panel->vl_fps)
+ return;
+
+ /* If it's serial mode */
+ if (panel->vl_serial & SPPR_SERIAL)
+ clk = CONFIG_FTLCDC200_FREQ / 3;
+ else
+ clk = CONFIG_FTLCDC200_FREQ;
+
+ /* Derive clock divisor */
+ ht = panel->vl_col + panel->vl_hbp + panel->vl_hfp + panel->vl_hsw;
+ vt = panel->vl_row + panel->vl_vbp + panel->vl_vfp + panel->vl_vsw;
+ for (div = 1; div <= 0x7f; ++div) {
+ long tmp = (clk / div / ht / vt);
+ if (fps > tmp) {
+ lower = tmp;
+ break;
+ }
+ upper = tmp;
+ }
+ if ((upper - fps) > (fps - lower))
+ div += 1;
+ div = (div > 1) ? (div - 1) : div;
+
+ /* Update hardware register cache */
+ panel->vl_polarity = (panel->vl_polarity & (~0x7f00))
+ | ((div - 1) << 8);
+
+ /* Derive real frame rate */
+ panel->vl_fps = (u_long)(clk / div / ht / vt);
+
+ debug("ftlcdc200: %s\n", panel->vl_name);
+ debug("ftlcdc200: fps=%u (%u < FPS < %u)\n",
+ (unsigned int)panel->vl_fps,
+ (unsigned int)lower,
+ (unsigned int)upper);
+ debug("ftlcdc200: div=%u (ahb=%u MHz)\n",
+ (unsigned int)div,
+ (unsigned int)CONFIG_FTLCDC200_FREQ / 1000000);
+}
+
+/* setcolreg used in 8bpp/16bpp */
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+ /* nothing needs to be done, we use true color */
+}
+
+/* initcolregs used in monochrome */
+void lcd_initcolregs(void)
+{
+ /* nothing needs to be done, we use true color */
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ uint32_t i, v;
+
+ /*
+ * initialize the contrast lookup table and the Red, Green, Blue
+ * gamma lookup table, fill the straight line x-y=0 to the contrast
+ * and gamma lookup table
+ */
+ for (i = 0; i < 64; i++) {
+ v = 0x03020100 + 0x04040404 * i;
+ writel(v, ®s->gamma_r[i]);
+ writel(v, ®s->gamma_g[i]);
+ writel(v, ®s->gamma_b[i]);
+ }
+
+ writel(virt_to_phys(lcdbase), ®s->fb0);
+
+ debug("ftlcdc200: fb_base=0x%08X at 0x%08X\n",
+ (uint32_t)lcdbase, readl(®s->fb0));
+}
+
+void lcd_enable(void)
+{
+ struct vidinfo *panel = &panel_info;
+
+ /* 1. derive the clock parameters at runtime */
+ ftlcdc2xx_fixup(panel);
+ /* 2. disable lcd */
+ writel(0, ®s->fer);
+ /* 3. setup panel parameters */
+ writel(panel->vl_pixel, ®s->ppr);
+ writel(HTCR_PL(panel->vl_col) | HTCR_HSYNC(panel->vl_hsw)
+ | HTCR_HBP(panel->vl_hbp) | HTCR_HFP(panel->vl_hfp),
+ ®s->htcr);
+ writel(VTCR0_LF(panel->vl_row) | VTCR0_VSYNC(panel->vl_vsw)
+ | VTCR0_VFP(panel->vl_vfp), ®s->vtcr[0]);
+ writel(VTCR1_VBP(panel->vl_vbp), ®s->vtcr[1]);
+ writel(panel->vl_polarity, ®s->pcr);
+ writel(panel->vl_serial, ®s->sppr);
+ writel(panel->vl_ccir656, ®s->ccir);
+ /* 4. default 4 cycles delay for all framebuffer */
+ writel(0x04040404, ®s->fifo);
+ /* 5. disable & clean interrupts */
+ writel(0x00, ®s->ier);
+ writel(0x0f, ®s->iscr);
+ /* 6. enable lcd */
+ writel(panel->vl_enable, ®s->fer);
+}
+
+ulong calc_fbsize(void)
+{
+ return ((panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+}
diff --git a/drivers/video/ftlcdc200_panel.c b/drivers/video/ftlcdc200_panel.c
new file mode 100644
index 0000000..43b38c7
--- /dev/null
+++ b/drivers/video/ftlcdc200_panel.c
@@ -0,0 +1,221 @@
+/*
+ * Faraday LCD Controller
+ *
+ * (C) Copyright 2013 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <lcd.h>
+#include <faraday/ftlcdc200.h>
+
+struct vidinfo panel_info = {
+#if defined(CONFIG_FTLCDC200_320X240P_SHARP)
+ .vl_name = "SHARP-320x240p",
+ .vl_col = 320,
+ .vl_row = 240,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x10,
+ .vl_hfp = 0x01,
+ .vl_hbp = 0x10,
+ .vl_vsw = 0x01,
+ .vl_vfp = 0x0f,
+ .vl_vbp = 0x07,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_BGR | PPR_ENDIAN_LBLP,
+ .vl_polarity = POL_DIV(23) | POL_IHS | POL_ICK,
+ .vl_serial = 0,
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_320X240P_AUO)
+ .vl_name = "AUO-320x240p",
+ .vl_col = 320,
+ .vl_row = 240,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x17,
+ .vl_hfp = 0x01,
+ .vl_hbp = 0x2A,
+ .vl_vsw = 0x01,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x0D,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_PWROFF,
+ .vl_polarity = POL_DIV(21) | POL_IHS,
+ .vl_serial = 0,
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_320X240S_AUO)
+ .vl_name = "AUO-320x240s",
+ .vl_col = 320,
+ .vl_row = 240,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x17,
+ .vl_hfp = 0x01,
+ .vl_hbp = 0x2A,
+ .vl_vsw = 0x01,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x0D,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_PANEL_8BIT
+ | PPR_ENDIAN_LBBP,
+ .vl_polarity = POL_DIV(7) | POL_IHS,
+ .vl_serial = SPPR_SERIAL | SPPR_CS(1),
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_640X480P_PV)
+ .vl_name = "PV-640x480p",
+ .vl_col = 640,
+ .vl_row = 480,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x63,
+ .vl_hfp = 0x01,
+ .vl_hbp = 0x2D,
+ .vl_vsw = 0x44,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x1D,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_BGR | PPR_ENDIAN_LBBP,
+ .vl_polarity = POL_DIV(6) | POL_IHS | POL_IVS | POL_ICK,
+ .vl_serial = 0,
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_800X480S_TPO)
+ .vl_name = "TPO-800x480s",
+ .vl_col = 800,
+ .vl_row = 480,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x01,
+ .vl_hfp = 0x2C,
+ .vl_hbp = 0x01,
+ .vl_vsw = 0x01,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x01,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_ENDIAN_LBBP,
+ .vl_polarity = POL_DIV(1) | POL_IHS | POL_IVS | POL_ICK,
+ .vl_serial = SPPR_SERIAL | SPPR_CS(0),
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_800X480P_TPO)
+ .vl_name = "TPO-800x480p",
+ .vl_col = 800,
+ .vl_row = 480,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x04,
+ .vl_hfp = 0x2C,
+ .vl_hbp = 0xD4,
+ .vl_vsw = 0x02,
+ .vl_vfp = 0x0A,
+ .vl_vbp = 0x22,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_BGR | PPR_ENDIAN_LBBP,
+ .vl_polarity = POL_DIV(7) | POL_IHS | POL_IVS | POL_ICK,
+ .vl_serial = 0,
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_800X480P_CPT)
+ /* Chunghwa Picture Tubes - CLAA048LA0BCT */
+ .vl_name = "CPT-800x480p",
+ .vl_col = 800,
+ .vl_row = 480,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x01,
+ .vl_hfp = 0x32,
+ .vl_hbp = 0x31,
+ .vl_vsw = 0x01,
+ .vl_vfp = 0x0E,
+ .vl_vbp = 0x05,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_PANEL_8BIT
+ | PPR_ENDIAN_LBBP,
+ .vl_polarity = POL_DIV(7) | POL_IHS | POL_IVS | POL_ICK,
+ .vl_serial = 0,
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_800X600_VGA)
+ .vl_name = "D-SUB: VGA-800x600",
+ .vl_col = 800,
+ .vl_row = 600,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x7E,
+ .vl_hfp = 0x26,
+ .vl_hbp = 0x56,
+ .vl_vsw = 0x02,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x16,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_PANEL_8BIT | PPR_BPP_16,
+ .vl_polarity = POL_DIV(3) | POL_IVS | POL_IHS,
+ .vl_serial = 0,
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_1024X768_VGA)
+ .vl_name = "D-SUB: VGA-1024x768",
+ .vl_col = 1024,
+ .vl_row = 768,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 0, /* drived at runtime */
+ .vl_hsw = 0x7E,
+ .vl_hfp = 0x26,
+ .vl_hbp = 0x56,
+ .vl_vsw = 0x02,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x16,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_PANEL_8BIT | PPR_BPP_16,
+ .vl_polarity = POL_DIV(2) | POL_IVS | POL_IHS,
+ .vl_serial = 0,
+ .vl_ccir656 = 0,
+#elif defined(CONFIG_FTLCDC200_720X480_NTSC)
+ .vl_name = "A/V: NTSC-720x480",
+ .vl_col = 720,
+ .vl_row = 480,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 30, /* Frame per second */
+ .vl_hsw = 0x06,
+ .vl_hfp = 0x7D,
+ .vl_hbp = 0x01,
+ .vl_vsw = 0x0F,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x1A,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_ENDIAN_LBBP,
+ .vl_polarity = 0,
+ .vl_serial = 0,
+ .vl_ccir656 = 3,
+#elif defined(CONFIG_FTLCDC200_640X480_NTSC)
+ .vl_name = "A/V: NTSC-640x480",
+ .vl_col = 640,
+ .vl_row = 480,
+ .vl_bpix = 4, /* Bits per pixel, 0 = 1, ... 4 = 16 */
+ .vl_fps = 30, /* Frame per second */
+ .vl_hsw = 0x02,
+ .vl_hfp = 0xD1,
+ .vl_hbp = 0x01,
+ .vl_vsw = 0x10,
+ .vl_vfp = 0x01,
+ .vl_vbp = 0x19,
+ .vl_enable = FER_EN | FER_ON,
+ .vl_pixel = PPR_BPP_16 | PPR_PWROFF | PPR_ENDIAN_LBBP,
+ .vl_polarity = 0,
+ .vl_serial = 0,
+ .vl_ccir656 = 1,
+#else
+#error "Please specific target LCD panel."
+#endif
+};
diff --git a/include/faraday/ftlcdc200.h b/include/faraday/ftlcdc200.h
new file mode 100644
index 0000000..35f19b7
--- /dev/null
+++ b/include/faraday/ftlcdc200.h
@@ -0,0 +1,179 @@
+/*
+ * Faraday LCD Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef __FTLCDC200_H
+#define __FTLCDC200_H
+
+/* FTLCDC200 Registers */
+struct ftlcdc200_regs {
+ /* 0x000 ~ 0x0ff */
+ uint32_t fer; /* 0x000: Function Enable Register */
+ uint32_t ppr; /* 0x004: Panel Pixel Register */
+ uint32_t ier; /* 0x008: Interrupt Enable Register */
+ uint32_t iscr; /* 0x00C: Interrupt Status Clear Register */
+ uint32_t isr; /* 0x010: Interrupt Status Register */
+ uint32_t rsvd0[1];
+ uint32_t fb0; /* 0x018: Framebuffer Base Register 0 */
+ uint32_t rsvd1[2];
+ uint32_t fb1; /* 0x024: Framebuffer Base Register 1 */
+ uint32_t rsvd2[2];
+ uint32_t fb2; /* 0x030: Framebuffer Base Register 2 */
+ uint32_t rsvd3[2];
+ uint32_t fb3; /* 0x03C: Framebuffer Base Register 3 */
+ uint32_t rsvd4[2];
+ uint32_t patg; /* 0x048: Pattern Generator */
+ uint32_t fifo; /* 0x04C: FIFO Threshold */
+ uint32_t gpio; /* 0x050: GPIO */
+ uint32_t rsvd5[43];
+
+ /* 0x100 ~ 0x1ff */
+ uint32_t htcr; /* Horizontal Timing Control Register */
+ uint32_t vtcr[2]; /* Vertical Timing Control Register */
+ uint32_t pcr; /* Polarity Control Register */
+ uint32_t rsvd6[60];
+
+ /* 0x200 ~ 0x2ff */
+ uint32_t sppr; /* Serial Panel Pixel Register */
+ uint32_t ccir; /* CCIR565 Register */
+ uint32_t rsvd7[62];
+
+ /* 0x300 ~ 0x3ff */
+ uint32_t pipr; /* Picture-In-Picture Register */
+ uint32_t pip1pos; /* Sub-picture 1 position */
+ uint32_t pip1dim; /* Sub-picture 1 dimension */
+ uint32_t pip2pos; /* Sub-picture 2 position */
+ uint32_t pip2dim; /* Sub-picture 2 dimension */
+ uint32_t rsvd8[59];
+
+ /* 0x400 ~ 0x5ff */
+ uint32_t cmnt[4]; /* Color Management */
+ uint32_t rsvd9[124];
+
+ /* 0x600 ~ 0x6ff */
+ uint32_t gamma_r[64]; /* RED - Gamma Correct */
+
+ /* 0x700 ~ 0x7ff */
+ uint32_t gamma_g[64]; /* GREEN - Gamma Correct */
+
+ /* 0x800 ~ 0x8ff */
+ uint32_t gamma_b[64]; /* BLUE - Gamma Correct */
+
+ /* 0x900 ~ 0x9ff */
+ uint32_t rsvd10[64];
+
+ /* 0xa00 ~ 0xbff */
+ uint32_t palette[128]; /* Palette Write Port */
+
+ /* 0xc00 ~ 0xcff */
+ uint32_t cstn_cr; /* CSTN Control Register */
+ uint32_t cstn_pr; /* CSTN Parameter Register */
+ uint32_t rsvd11[62];
+
+ /* 0xd00 ~ 0xdff */
+ uint32_t cstn_bmap[16]; /* CSTN bitmap write port */
+ uint32_t rsvd12[48];
+};
+
+/* LCD Function Enable Register */
+#define FER_EN (1 << 0) /* chip enabled */
+#define FER_ON (1 << 1) /* screen on */
+#define FER_YUV420 (3 << 2)
+#define FER_YUV422 (2 << 2)
+#define FER_YUV (1 << 3) /* 1:YUV, 0:RGB */
+
+/* LCD Panel Pixel Register */
+#define PPR_BPP_1 (0 << 0)
+#define PPR_BPP_2 (1 << 0)
+#define PPR_BPP_4 (2 << 0)
+#define PPR_BPP_8 (3 << 0)
+#define PPR_BPP_16 (4 << 0)
+#define PPR_BPP_24 (5 << 0)
+#define PPR_BPP_MASK (7 << 0)
+#define PPR_PWROFF (1 << 3)
+#define PPR_BGR (1 << 4)
+#define PPR_ENDIAN_LBLP (0 << 5)
+#define PPR_ENDIAN_BBBP (1 << 5)
+#define PPR_ENDIAN_LBBP (2 << 5)
+#define PPR_ENDIAN_MASK (3 << 5)
+#define PPR_RGB1 (PPR_BPP_1)
+#define PPR_RGB2 (PPR_BPP_2)
+#define PPR_RGB4 (PPR_BPP_4)
+#define PPR_RGB8 (PPR_BPP_8)
+#define PPR_RGB12 (PPR_BPP_16 | (2 << 7))
+#define PPR_RGB16_555 (PPR_BPP_16 | (1 << 7))
+#define PPR_RGB16_565 (PPR_BPP_16 | (0 << 7))
+#define PPR_RGB24 (PPR_BPP_24)
+#define PPR_RGB32 (PPR_BPP_24)
+#define PPR_RGB_MASK (PPR_BPP_MASK | (3 << 7))
+#define PPR_VCOMP_VSYNC (0 << 9)
+#define PPR_VCOMP_VBP (1 << 9)
+#define PPR_VCOMP_VAIMG (2 << 9)
+#define PPR_VCOMP_VFP (3 << 9)
+#define PPR_VCOMP_MASK (3 << 9)
+#define PPR_PANEL_6BIT (0 << 11)
+#define PPR_PANEL_8BIT (1 << 11)
+#define PPR_DITHER565 (0 << 12)
+#define PPR_DITHER555 (1 << 12)
+#define PPR_DITHER444 (2 << 12)
+#define PPR_HCLK_RESET (1 << 14)
+#define PPR_LCCLK_RESET (1 << 15)
+
+/* LCD Interrupt Enable Register */
+#define IER_FIFOUR (1 << 0)
+#define IER_NEXTFB (1 << 1)
+#define IER_VCOMP (1 << 2)
+#define IER_BUSERR (1 << 3)
+
+/* LCD Interrupt Status Register */
+#define ISR_FIFOUR (1 << 0)
+#define ISR_NEXTFB (1 << 1)
+#define ISR_VCOMP (1 << 2)
+#define ISR_BUSERR (1 << 3)
+
+/* LCD Horizontal Timing Control Register */
+#define HTCR_HBP(x) ((((x) - 1) & 0xff) << 24)
+#define HTCR_HFP(x) ((((x) - 1) & 0xff) << 16)
+#define HTCR_HSYNC(x) ((((x) - 1) & 0xff) << 8)
+#define HTCR_PL(x) (((x >> 4) - 1) & 0xff)
+
+/* LCD Vertical Timing Control Register 0 */
+#define VTCR0_VFP(x) (((x) & 0xff) << 24)
+#define VTCR0_VSYNC(x) ((((x) - 1) & 0x3f) << 16)
+#define VTCR0_LF(x) (((x) - 1) & 0xfff)
+
+/* LCD Vertical Timing Control Register 1 */
+#define VTCR1_VBP(x) ((x) & 0xff)
+
+/* LCD Polarity Control Register */
+#define PCR_IVS (1 << 0)
+#define PCR_IHS (1 << 1)
+#define PCR_ICK (1 << 2)
+#define PCR_IDE (1 << 3)
+#define PCR_IPWR (1 << 4)
+#define PCR_DIV(x) ((((x) - 1) & 0x7f) << 8)
+
+/* LCD Serial Panel Pixel Register */
+#define SPPR_SERIAL (1 << 0)
+#define SPPR_DELTA (1 << 1)
+#define SPPR_CS(x) ((x) << 2)
+#define SPPR_CS_RGB (0 << 2)
+#define SPPR_CS_BRG (1 << 2)
+#define SPPR_CS_GBR (2 << 2)
+#define SPPR_LSR (1 << 4)
+#define SPPR_AUO052 (1 << 5)
+
+/* LCD CCIR656 Register */
+#define CCIR_PAL (0 << 0)
+#define CCIR_NTSC (1 << 0)
+#define CCIR_P640 (0 << 1)
+#define CCIR_P720 (1 << 1)
+#define CCIR_PHASE(x) ((x) << 2)
+
+#endif /* __FTLCDC200_H */
diff --git a/include/lcd.h b/include/lcd.h
index 30225ed..14fa4fd 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -253,6 +253,39 @@ typedef struct vidinfo {
void init_panel_info(vidinfo_t *vid);
+#elif defined(CONFIG_FTLCDC200)
+
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 800) */
+ ushort vl_row; /* Number of rows (i.e. 600) */
+
+ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2 ... 4 = 16 */
+
+ /* Timing Parameters */
+ u_char vl_fps; /* Frame per second */
+
+ u_char vl_hsw;
+ u_char vl_hbp;
+ u_char vl_hfp;
+
+ u_char vl_vsw;
+ u_char vl_vbp;
+ u_char vl_vfp;
+
+ /* Pre-defined FTLCDC200 register values */
+ u_long vl_enable; /* LCDEnable */
+ u_long vl_pixel; /* PanelPixel */
+ u_long vl_polarity;/* Polarity */
+ u_long vl_serial; /* SerialPanelPixel */
+ u_long vl_ccir656; /* CCIR656 */
+
+ /* Panel name */
+ char *vl_name;
+
+ ushort *cmap; /* Pointer to the colormap */
+ void *priv; /* Pointer to driver-specific data */
+} vidinfo_t;
+
#else
typedef struct vidinfo {
--
1.7.9.5
next prev parent reply other threads:[~2013-07-04 3:40 UTC|newest]
Thread overview: 311+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-29 7:06 [U-Boot] [PATCH 00/11] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 01/11] arm: add MMU/d-cache support for Faraday cores Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 00/12] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 01/12] mtd: spi: winbond: add W25PXX support Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 01/11] arm: add MMU/D-Cache support for Faraday cores Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 0/7] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 1/7] arm: add MMU/D-Cache support for Faraday cores Kuo-Jung Su
2013-06-10 17:59 ` Albert ARIBAUD
2013-06-11 3:09 ` Kuo-Jung Su
2013-06-11 15:28 ` Albert ARIBAUD
2013-06-14 5:44 ` Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 2/7] arm: add Faraday common utilities Kuo-Jung Su
2013-06-10 18:05 ` Albert ARIBAUD
2013-06-11 3:02 ` Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 3/7] arm: add Faraday interrupt controller support Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 4/7] arm: add Faraday FTTMR010 timer support Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 5/7] arm: add Faraday FTPWMTMR010 " Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 6/7] arm: add Faraday firmware image utility Kuo-Jung Su
2013-06-10 18:38 ` Albert ARIBAUD
2013-06-11 3:00 ` Kuo-Jung Su
2013-05-07 6:25 ` [U-Boot] [PATCH v4 7/7] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-06-10 18:39 ` Albert ARIBAUD
2013-06-11 3:01 ` Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 02/11] net: ftgmac100: add MMU/D-cache support Kuo-Jung Su
2013-05-07 6:33 ` [U-Boot] [PATCH v4] net: update FTGMAC100 for " Kuo-Jung Su
2013-07-08 16:21 ` Joe Hershberger
2013-04-26 8:02 ` [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support Kuo-Jung Su
2013-05-02 16:03 ` Tom Rini
2013-05-03 6:01 ` Kuo-Jung Su
2013-05-07 6:33 ` [U-Boot] [PATCH v4] " Kuo-Jung Su
2013-07-08 16:19 ` Joe Hershberger
2013-04-26 8:02 ` [U-Boot] [PATCH v3 04/11] i2c: add Faraday FTI2C010 I2C controller support Kuo-Jung Su
2013-04-29 3:34 ` Heiko Schocher
2013-05-07 6:32 ` [U-Boot] [PATCH v4 03/16] " Kuo-Jung Su
2013-05-07 13:19 ` Heiko Schocher
2013-05-08 1:51 ` Kuo-Jung Su
2013-05-08 4:30 ` Heiko Schocher
2013-05-08 5:47 ` Kuo-Jung Su
2013-05-08 7:36 ` [U-Boot] [PATCH v5] " Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 05/11] spi: add Faraday FTSPI010 SPI " Kuo-Jung Su
2013-05-07 6:34 ` [U-Boot] [PATCH v4] " Kuo-Jung Su
2013-06-12 18:56 ` [U-Boot] [U-Boot, " Jagan Teki
2013-06-14 6:00 ` Kuo-Jung Su
2013-11-22 7:44 ` [U-Boot] [PATCH v5] spi: ftssp010_spi: add Faraday " Kuo-Jung Su
2013-11-28 2:46 ` [U-Boot] [PATCH v6] " Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue Kuo-Jung Su
2013-05-03 22:35 ` Andy Fleming
2013-05-06 6:44 ` Kuo-Jung Su
2013-05-07 6:32 ` [U-Boot] [PATCH v4] mmc: update Faraday FTSDC010 for rw performance Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 07/11] mtd: nand: add Faraday FTNANDC021 NAND controller support Kuo-Jung Su
2013-04-26 23:41 ` Scott Wood
2013-04-29 3:28 ` Kuo-Jung Su
2013-04-29 20:46 ` Scott Wood
2013-04-30 1:33 ` Kuo-Jung Su
2013-05-07 6:33 ` [U-Boot] [PATCH v4] " Kuo-Jung Su
2013-05-09 0:43 ` Scott Wood
2013-05-09 1:45 ` Kuo-Jung Su
2013-05-09 1:51 ` [U-Boot] [PATCH v5] " Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 08/11] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-04-26 12:19 ` Marek Vasut
2013-04-29 3:10 ` Kuo-Jung Su
2013-04-29 22:50 ` Marek Vasut
2013-04-30 1:32 ` Kuo-Jung Su
2013-05-01 19:34 ` Marek Vasut
2013-05-02 1:14 ` Kuo-Jung Su
2013-05-07 6:26 ` [U-Boot] [PATCH v4 0/2] usb: ehci: add Faraday USB EHCI&Gadget support Kuo-Jung Su
2013-05-07 6:26 ` [U-Boot] [PATCH v4 1/2] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-05-07 21:42 ` Marek Vasut
2013-05-08 2:18 ` Kuo-Jung Su
2013-05-08 3:09 ` Marek Vasut
2013-05-08 5:41 ` Kuo-Jung Su
2013-05-08 11:52 ` Marek Vasut
2013-05-09 1:51 ` Kuo-Jung Su
2013-05-09 3:20 ` [U-Boot] [PATCH v5 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
2013-05-09 3:20 ` [U-Boot] [PATCH v5 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
2013-05-10 11:41 ` Marek Vasut
2013-05-13 1:11 ` Kuo-Jung Su
2013-05-13 2:07 ` [U-Boot] [PATCH v6 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
2013-05-13 2:07 ` [U-Boot] [PATCH v6 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
2013-05-13 2:36 ` Marek Vasut
2013-05-13 8:12 ` Kuo-Jung Su
2013-05-13 8:28 ` [U-Boot] [PATCH v7 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
2013-05-13 8:28 ` [U-Boot] [PATCH v7 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
2013-05-14 2:29 ` [U-Boot] [PATCH v8 0/4] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
2013-05-14 2:29 ` [U-Boot] [PATCH v8 1/4] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
2013-05-15 7:29 ` [U-Boot] [PATCH v9 0/5] usb: add Faraday EHCI & Gadget support Kuo-Jung Su
2013-05-15 7:29 ` [U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access Kuo-Jung Su
2013-05-21 20:09 ` Marek Vasut
2013-05-15 7:29 ` [U-Boot] [PATCH v9 2/5] usb: ehci: add weak-aliased function for PORTSC Kuo-Jung Su
2013-05-15 7:29 ` [U-Boot] [PATCH v9 3/5] usb: hub: make minimum power-on delay configurable Kuo-Jung Su
2013-05-15 7:29 ` [U-Boot] [PATCH v9 4/5] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-05-15 7:29 ` [U-Boot] [PATCH v9 5/5] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
2013-05-19 18:37 ` Marek Vasut
2013-05-20 0:56 ` Kuo-Jung Su
2013-05-14 2:29 ` [U-Boot] [PATCH v8 2/4] usb: ehci: add weak-aliased function for PORTSC Kuo-Jung Su
2013-05-14 2:29 ` [U-Boot] [PATCH v8 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-05-14 2:29 ` [U-Boot] [PATCH v8 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
2013-05-13 8:28 ` [U-Boot] [PATCH v7 2/4] usb: ehci: add weak-aliased function for PORTSC Kuo-Jung Su
2013-05-13 8:28 ` [U-Boot] [PATCH v7 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-05-13 8:28 ` [U-Boot] [PATCH v7 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
2013-05-13 2:07 ` [U-Boot] [PATCH v6 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
2013-05-13 2:32 ` Marek Vasut
2013-05-13 8:09 ` Kuo-Jung Su
2013-05-13 15:10 ` Marek Vasut
2013-05-14 1:26 ` Kuo-Jung Su
2013-05-14 13:47 ` Marek Vasut
2013-05-15 1:03 ` Kuo-Jung Su
2013-05-15 2:42 ` Kuo-Jung Su
2013-05-15 3:29 ` Marek Vasut
2013-05-15 4:07 ` Kuo-Jung Su
2013-05-13 2:07 ` [U-Boot] [PATCH v6 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-05-13 2:07 ` [U-Boot] [PATCH v6 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
2013-05-09 3:20 ` [U-Boot] [PATCH v5 2/4] usb: ehci: add weak-aliased functions to portsc & tdi Kuo-Jung Su
2013-05-10 11:44 ` Marek Vasut
2013-05-13 1:10 ` Kuo-Jung Su
2013-05-09 3:20 ` [U-Boot] [PATCH v5 3/4] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-05-09 3:20 ` [U-Boot] [PATCH v5 4/4] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
2013-05-07 6:26 ` [U-Boot] [PATCH v4 2/2] " Kuo-Jung Su
2013-05-07 21:37 ` Marek Vasut
2013-05-08 2:30 ` Kuo-Jung Su
2013-05-08 3:07 ` Marek Vasut
2013-04-26 8:02 ` [U-Boot] [PATCH v3 09/11] " Kuo-Jung Su
2013-04-26 12:21 ` Marek Vasut
2013-04-29 3:11 ` Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 10/11] video: add Faraday FTLCDC200 LCD controller support Kuo-Jung Su
2013-05-06 20:18 ` Anatolij Gustschin
2013-05-07 6:34 ` [U-Boot] [PATCH v2] " Kuo-Jung Su
2013-04-26 8:02 ` [U-Boot] [PATCH v3 11/11] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-05-02 22:27 ` [U-Boot] [PATCH v3 00/11] " Tom Rini
2013-05-03 6:02 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 02/12] net: ftgmac100: add MMU/D-cache support Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 03/12] net: add Faraday FTMAC110 10/100Mbps ethernet support Kuo-Jung Su
2013-04-18 10:52 ` Wolfgang Denk
2013-04-22 2:56 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 04/12] i2c: add Faraday FTI2C010 I2C controller support Kuo-Jung Su
2013-04-18 10:54 ` Wolfgang Denk
2013-04-22 2:52 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI " Kuo-Jung Su
2013-04-18 10:56 ` Wolfgang Denk
2013-04-22 2:52 ` Kuo-Jung Su
2013-08-08 13:38 ` Jagan Teki
2013-08-09 0:47 ` Kuo-Jung Su
2013-08-09 11:27 ` Jagan Teki
2013-08-12 0:37 ` Kuo-Jung Su
2013-10-03 19:53 ` Jagan Teki
2013-04-18 9:25 ` [U-Boot] [PATCH v2 06/12] mmc: add an alternative driver to Faraday FTSDC010 Kuo-Jung Su
2013-04-18 10:57 ` Wolfgang Denk
2013-04-22 2:51 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 07/12] mtd: nand: add Faraday FTNANDC021 NAND controller support Kuo-Jung Su
2013-04-18 11:04 ` Wolfgang Denk
2013-04-22 1:52 ` Kuo-Jung Su
2013-04-18 19:44 ` Scott Wood
2013-04-22 2:45 ` Kuo-Jung Su
2013-04-22 23:11 ` Scott Wood
2013-04-23 1:19 ` Kuo-Jung Su
2013-04-23 22:57 ` Scott Wood
2013-04-24 1:03 ` Kuo-Jung Su
2013-04-23 1:22 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 08/12] mtd: spi: add FTSPI020 SPI Flash " Kuo-Jung Su
2013-04-18 11:08 ` Wolfgang Denk
2013-04-22 1:51 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 09/12] usb: ehci: add Faraday USB 2.0 EHCI support Kuo-Jung Su
2013-04-18 11:09 ` Wolfgang Denk
2013-04-22 1:45 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 10/12] usb: gadget: add Faraday FOTG210 USB gadget support Kuo-Jung Su
2013-04-18 11:11 ` Wolfgang Denk
2013-04-22 1:45 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 11/12] arm: add MMU/d-cache support for Faraday cores Kuo-Jung Su
2013-04-18 11:13 ` Wolfgang Denk
2013-04-22 1:23 ` Kuo-Jung Su
2013-04-18 19:09 ` Albert ARIBAUD
2013-04-22 1:27 ` Kuo-Jung Su
2013-04-18 9:25 ` [U-Boot] [PATCH v2 12/12] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-04-18 11:16 ` Wolfgang Denk
2013-04-22 1:30 ` Kuo-Jung Su
2013-04-18 10:43 ` [U-Boot] [PATCH v2 00/12] " Wolfgang Denk
2013-04-22 1:27 ` Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 02/11] net/ftgmac100: add MMU/D-cache support Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 03/11] net: add FTMAC110 10/100Mbps ethernet support Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 04/11] usb-ehci: add Faraday USB 2.0 EHCI controller support Kuo-Jung Su
2013-03-30 6:29 ` Marek Vasut
2013-04-01 1:21 ` Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 05/11] usb-gadget: add FOTG210 USB gadget support Kuo-Jung Su
2013-03-30 6:27 ` Marek Vasut
2013-04-01 1:20 ` Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 06/11] i2c: add FTI2C010 I2C controller support Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 07/11] spi: add FTSPI010 SPI " Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 08/11] mtd/nand: add FTNANDC021 NAND flash " Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 09/11] mtd/spi: add FTSPI020 SPI Flash " Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 10/11] mmc: add an alternative FTSDC010 driver support Kuo-Jung Su
2013-03-29 7:06 ` [U-Boot] [PATCH 11/11] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 00/14] " Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 01/14] arm: dma_alloc_coherent: malloc() -> memalign() Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 02/14] net: ftgmac100: add MMU/D-cache support Kuo-Jung Su
2013-06-23 7:16 ` Albert ARIBAUD
2013-06-24 1:31 ` Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 03/14] net: add Faraday FTMAC110 10/100Mbps ethernet support Kuo-Jung Su
2013-06-23 7:18 ` Albert ARIBAUD
2013-06-23 11:09 ` Tom Rini
2013-06-23 13:18 ` Albert ARIBAUD
2013-06-23 15:17 ` Tom Rini
2013-06-17 12:06 ` [U-Boot] [PATCH v5 04/14] video: add Faraday FTLCDC200 LCD controller support Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 05/14] nand: add Faraday FTNANDC021 NAND " Kuo-Jung Su
2013-06-18 0:08 ` Scott Wood
2013-06-18 0:51 ` Kuo-Jung Su
2013-06-18 0:56 ` Scott Wood
2013-06-17 12:06 ` [U-Boot] [PATCH v5 06/14] cfi_flash: use buffer length in unmap_physmem() Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 07/14] arm: add MMU/D-Cache support for Faraday cores Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 08/14] arm: add Faraday processor core support Kuo-Jung Su
2013-06-17 12:06 ` [U-Boot] [PATCH v5 09/14] arm: add Faraday FTINTC020 interrupt controller support Kuo-Jung Su
2013-06-17 12:07 ` [U-Boot] [PATCH v5 10/14] arm: add Faraday FTTMR010 timer support Kuo-Jung Su
2013-06-17 12:07 ` [U-Boot] [PATCH v5 11/14] arm: add Faraday FTPWMTMR010 " Kuo-Jung Su
2013-06-17 12:07 ` [U-Boot] [PATCH v5 12/14] arm: add Faraday specific boot command Kuo-Jung Su
2013-06-23 7:22 ` Albert ARIBAUD
2013-06-24 1:30 ` Kuo-Jung Su
2013-06-17 12:07 ` [U-Boot] [PATCH v5 13/14] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate() Kuo-Jung Su
2013-06-17 18:32 ` Andy Fleming
2013-06-18 0:48 ` Kuo-Jung Su
2013-06-17 12:07 ` [U-Boot] [PATCH v5 14/14] arm: add Faraday A360/A369 SoC platform support Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 00/12] arm: add Faraday A36x " Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 01/12] arm: dma_alloc_coherent: malloc() -> memalign() Kuo-Jung Su
2013-07-04 3:40 ` Kuo-Jung Su [this message]
2013-07-04 3:40 ` [U-Boot] [PATCH v6 03/12] nand: add Faraday FTNANDC021 NAND controller support Kuo-Jung Su
2013-07-08 23:59 ` Scott Wood
2013-07-09 1:42 ` Kuo-Jung Su
2013-07-09 1:48 ` Scott Wood
2013-07-09 1:57 ` Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 04/12] cfi_flash: use buffer length in unmap_physmem() Kuo-Jung Su
2013-07-25 14:46 ` Stefan Roese
2013-07-04 3:40 ` [U-Boot] [PATCH v6 05/12] arm: add MMU/D-Cache support for Faraday cores Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 06/12] arm: add Faraday processor core support Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 07/12] arm: add Faraday FTINTC020 interrupt controller support Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 08/12] arm: add Faraday FTTMR010 timer support Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 09/12] arm: add Faraday FTPWMTMR010 " Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 10/12] arm: add customized boot command for Faraday Images Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 11/12] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate() Kuo-Jung Su
2013-07-04 3:40 ` [U-Boot] [PATCH v6 12/12] arm: add Faraday A360/A369 SoC platform support Kuo-Jung Su
2013-07-25 9:07 ` [U-Boot] [PATCH v6 00/12] arm: add Faraday A36x " Albert ARIBAUD
2013-07-26 14:15 ` Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 00/11] " Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 01/11] arm: dma_alloc_coherent: malloc() -> memalign() Kuo-Jung Su
2013-09-14 10:09 ` Albert ARIBAUD
2013-07-29 5:51 ` [U-Boot] [PATCH v7 02/11] video: add Faraday FTLCDC200 LCD controller support Kuo-Jung Su
2013-08-09 19:33 ` Anatolij Gustschin
2013-07-29 5:51 ` [U-Boot] [PATCH v7 03/11] nand: add Faraday FTNANDC021 NAND " Kuo-Jung Su
2013-07-29 22:59 ` Scott Wood
2013-07-30 0:39 ` Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 04/11] arm: add MMU/D-Cache support for Faraday cores Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 05/11] arm: add Faraday processor core support Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 06/11] arm: add Faraday FTINTC020 interrupt controller support Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 07/11] arm: add Faraday FTTMR010 timer support Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 08/11] arm: add Faraday FTPWMTMR010 " Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 09/11] arm: add customized boot command for Faraday Images Kuo-Jung Su
2013-09-14 10:28 ` Albert ARIBAUD
2013-10-02 0:53 ` Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 10/11] mmc: ftsdc010_mci: clk_get_rate() -> clock_get_rate() Kuo-Jung Su
2013-07-29 5:51 ` [U-Boot] [PATCH v7 11/11] arm: add Faraday A360/A369 SoC platform support Kuo-Jung Su
2013-11-28 2:48 ` [U-Boot] [PATCH v8] nand: add Faraday FTNANDC021 NAND controller support Kuo-Jung Su
2014-03-04 2:17 ` [U-Boot] [U-Boot, " Scott Wood
2014-03-04 3:58 ` Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 0/8] arm: add Faraday A36x SoC platform support Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 1/8] arm: global_data: prepare for Faraday SoC support Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 2/8] arm: make mmu_enabled() a global function Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 3/8] arm: add Faraday ARM cores support Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 4/8] arm: faraday: revise the DMA API Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 5/8] arm: faraday: add FTPWMTMR010 timer support Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 6/8] arm: faraday: add FTTMR010 " Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 7/8] arm: faraday: add A360 SoC support Kuo-Jung Su
2013-12-30 9:23 ` [U-Boot] [PATCH v8 8/8] arm: faraday: add A369 " Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 0/7] arm: add Faraday SoC platform support Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 1/7] arm: add Faraday ARMv5TE cores support Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 2/7] arm: add Faraday SoC helper files Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 3/7] arm: faraday: add FTTMR010 timer support Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 4/7] arm: faraday: add FTPWMTMR010 " Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 5/7] arm: faraday: ftsmc020: add a fail-safe macro constant Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 6/7] arm: faraday: add A369 evaluation board support Kuo-Jung Su
2014-01-16 8:31 ` [U-Boot] [PATCH v9 7/7] arm: faraday: add Faraday Virtual Machine support Kuo-Jung Su
2014-02-20 3:40 ` [U-Boot] [PATCH v10 0/6] arm: add Faraday SoC platform support Kuo-Jung Su
2014-02-20 3:40 ` [U-Boot] [PATCH v10 1/6] arm: add Faraday ARMv5TE cores support Kuo-Jung Su
2014-02-20 3:40 ` [U-Boot] [PATCH v10 2/6] arm: faraday: add FTTMR010 timer support Kuo-Jung Su
2014-02-20 3:40 ` [U-Boot] [PATCH v10 3/6] arm: faraday: add FTPWMTMR010 " Kuo-Jung Su
2014-02-20 3:40 ` [U-Boot] [PATCH v10 4/6] arm: faraday: add A369 evaluation board support Kuo-Jung Su
2014-02-20 3:40 ` [U-Boot] [PATCH v10 5/6] arm: faraday: add missing header file for FTSDC021 Kuo-Jung Su
2014-02-20 3:40 ` [U-Boot] [PATCH v10 6/6] arm: faraday: add virtual machine support Kuo-Jung Su
2014-03-25 12:41 ` [U-Boot] [PATCH v10 0/6] arm: add Faraday SoC platform support Albert ARIBAUD
2014-03-26 6:08 ` Kuo-Jung Su
2014-03-26 6:03 ` [U-Boot] [PATCH v11 " Kuo-Jung Su
2014-03-26 6:03 ` [U-Boot] [PATCH v11 1/6] arm: add Faraday ARMv5TE cores support Kuo-Jung Su
2014-03-26 6:47 ` Wolfgang Denk
2014-03-26 7:22 ` Kuo-Jung Su
2014-03-26 6:03 ` [U-Boot] [PATCH v11 2/6] arm: faraday: add FTTMR010 timer support Kuo-Jung Su
2014-03-26 6:03 ` [U-Boot] [PATCH v11 3/6] arm: faraday: add FTPWMTMR010 " Kuo-Jung Su
2014-03-26 6:03 ` [U-Boot] [PATCH v11 4/6] arm: faraday: add A369 evaluation board support Kuo-Jung Su
2014-03-26 6:03 ` [U-Boot] [PATCH v11 5/6] arm: faraday: add missing header file for FTSDC021 Kuo-Jung Su
2014-03-26 6:03 ` [U-Boot] [PATCH v11 6/6] arm: faraday: add virtual machine support Kuo-Jung Su
2014-03-26 6:52 ` Wolfgang Denk
2014-03-26 7:24 ` Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 0/8] arm: add Faraday SoC platform support Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 1/8] libc: move strlcpy() from ether.c to string.c Kuo-Jung Su
2014-04-01 9:16 ` Marek Vasut
2014-04-03 0:58 ` Kuo-Jung Su
2014-04-03 8:16 ` Marek Vasut
2014-04-07 4:07 ` Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 2/8] arm: add legacy linux clock framework support Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 3/8] arm: add Faraday ARMv5TE platform common libraries Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 4/8] arm: faraday: add FTTMR010 timer suppor Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 5/8] arm: faraday: add FTPWMTMR010 timer support Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 6/8] arm: faraday: add A369 evaluation board support Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 7/8] arm: faraday: add missing header file for FTSDC021 Kuo-Jung Su
2014-04-01 8:46 ` [U-Boot] [PATCH v12 8/8] arm: faraday: add faraday virtual machine support Kuo-Jung Su
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372909244-25211-3-git-send-email-dantesu@gmail.com \
--to=dantesu@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox