From: Dan Murphy <dmurphy@TI.COM>
To: u-boot@lists.denx.de
Subject: [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander
Date: Wed, 10 Jul 2013 15:06:03 -0500 [thread overview]
Message-ID: <1373486763-13091-2-git-send-email-dmurphy@ti.com> (raw)
In-Reply-To: <1373486763-13091-1-git-send-email-dmurphy@ti.com>
Configure the tca6424 gpio expander
This allows use of the debug and tri color LEDs.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
board/ti/omap5_uevm/evm.c | 21 +++++++++++++++++++++
board/ti/omap5_uevm/mux_data.h | 2 ++
include/configs/omap5_uevm.h | 5 +++++
3 files changed, 28 insertions(+)
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 90046e8..0e9a559 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -26,6 +26,7 @@
#include <palmas.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
+#include <tca642x.h>
#include "mux_data.h"
@@ -35,6 +36,24 @@ const struct omap_sysinfo sysinfo = {
"Board: OMAP5430 EVM\n"
};
+/* @brief tca642x_init - Initial states for the GPIO expander
+ * input reg, output reg, polarity reg, configuration reg
+ */
+struct tca642x_bank_info tca642x_init[] = {
+ { .input_reg = 0x00,
+ .output_reg = 0x04,
+ .polarity_reg = 0x00,
+ .configuration_reg = 0x80 },
+ { .input_reg = 0x00,
+ .output_reg = 0x00,
+ .polarity_reg = 0x00,
+ .configuration_reg = 0xff },
+ { .input_reg = 0x00,
+ .output_reg = 0x00,
+ .polarity_reg = 0x00,
+ .configuration_reg = 0x40 },
+};
+
/**
* @brief board_init
*
@@ -46,6 +65,8 @@ int board_init(void)
gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+ tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init);
+
return 0;
}
diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h
index a82795d..7e6415e 100644
--- a/board/ti/omap5_uevm/mux_data.h
+++ b/board/ti/omap5_uevm/mux_data.h
@@ -56,6 +56,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */
{USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */
{USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */
+ {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */
+ {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */
};
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 46dacc2..bee1278 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -53,6 +53,11 @@
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
+#define CONFIG_TCA642X
+#define CONFIG_CMD_TCA642X
+#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
+#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
+
#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # "
#define CONSOLEDEV "ttyO2"
--
1.7.9.5
next prev parent reply other threads:[~2013-07-10 20:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-10 20:06 [U-Boot] [[PATCH v3 1/2] gpio: tca642x: Add the tca642x gpio expander driver Dan Murphy
2013-07-10 20:06 ` Dan Murphy [this message]
2013-07-10 23:56 ` [U-Boot] [[PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander Nishanth Menon
2013-07-11 14:30 ` Tom Rini
2013-07-11 15:10 ` Dan Murphy
2013-07-11 15:55 ` Dan Murphy
2013-07-11 18:02 ` Nishanth Menon
2013-07-12 17:30 ` Dan Murphy
2013-07-12 21:55 ` Nishanth Menon
2013-07-11 14:31 ` [U-Boot] [[PATCH v3 1/2] gpio: tca642x: Add the tca642x gpio expander driver Tom Rini
2013-07-11 15:11 ` Dan Murphy
-- strict thread matches above, loose matches on Subject: below --
2013-07-11 18:10 [U-Boot] [PATCH " Dan Murphy
2013-07-11 18:10 ` [U-Boot] [PATCH v3 2/2] gpio: omap5-uevm: Configure the tca6424 gpio expander Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373486763-13091-2-git-send-email-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox