From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 1/6] omap3_beagle: remove JFFS2 support.
Date: Thu, 11 Jul 2013 17:33:20 -0500 [thread overview]
Message-ID: <1373582005-18556-2-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1373582005-18556-1-git-send-email-nm@ti.com>
We do not use JFFS2 by default and it conflicts with
CONFIG_CMD_FS_GENERIC (ls command is the same). Since most of our
BOOTCMD can be simplified by using the FS_GENERIC, dropping JFFS2
Signed-off-by: Nishanth Menon <nm@ti.com>
---
include/configs/omap3_beagle.h | 8 --------
1 file changed, 8 deletions(-)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 48ce4c0..9adf4a5 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -150,7 +150,6 @@
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define MTDIDS_DEFAULT "nand0=nand"
@@ -203,13 +202,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET 0x680000
-#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
- /* partition */
/* Environment information */
#define CONFIG_BOOTDELAY 3
--
1.7.9.5
next prev parent reply other threads:[~2013-07-11 22:33 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-11 21:52 [U-Boot] [PATCH 0/5] omap3_beagle: configs: improve BOOT_CMD options Nishanth Menon
2013-07-11 21:52 ` [U-Boot] [PATCH 1/5] omap3_beagle: remove JFFS2 support Nishanth Menon
2013-07-12 2:49 ` Joel Fernandes
2013-07-12 3:49 ` Nishanth Menon
2013-07-12 4:25 ` Joel Fernandes
2013-07-12 4:35 ` Nishanth Menon
2013-07-11 21:52 ` [U-Boot] [PATCH 2/5] omap3_beagle: replace uImage.beagle with generic uImage Nishanth Menon
2013-07-11 21:52 ` [U-Boot] [PATCH 3/5] omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk Nishanth Menon
2013-07-11 22:33 ` [U-Boot] [PATCH V2 0/6] omap3_beagle: configs: improve BOOT_CMD options Nishanth Menon
2013-07-11 22:33 ` Nishanth Menon [this message]
2013-07-11 22:33 ` [U-Boot] [PATCH V2 2/6] omap3_beagle: replace uImage.beagle with generic uImage Nishanth Menon
2013-07-11 22:33 ` [U-Boot] [PATCH V2 3/6] beagleboard: remove RevB support for BeagleBoard Xm Nishanth Menon
2013-07-11 22:33 ` [U-Boot] [PATCH V2 4/6] omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk Nishanth Menon
2013-07-11 22:33 ` [U-Boot] [PATCH V2 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support Nishanth Menon
2013-07-11 22:37 ` Nishanth Menon
2013-07-11 22:33 ` [U-Boot] [PATCH V2 6/6] omap3_beagle: support booting from zImage and device tree as last option Nishanth Menon
2013-07-12 15:10 ` [U-Boot] [PATCH V2 0/6] omap3_beagle: configs: improve BOOT_CMD options Tom Rini
2013-07-15 12:11 ` [U-Boot] [PATCH V3 " Nishanth Menon
2013-07-15 12:11 ` [U-Boot] [PATCH V3 1/6] omap3_beagle: remove JFFS2 support Nishanth Menon
2013-07-15 12:11 ` [U-Boot] [PATCH V3 2/6] omap3_beagle: replace uImage.beagle with generic uImage Nishanth Menon
2013-07-15 12:11 ` [U-Boot] [PATCH V3 3/6] beagleboard: remove RevB support for BeagleBoard Xm Nishanth Menon
2013-07-15 12:11 ` [U-Boot] [PATCH V3 4/6] omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk Nishanth Menon
2013-07-15 12:11 ` [U-Boot] [PATCH V3 5/6] omap3_beagle: support findfdt and loadfdt for devicetree support Nishanth Menon
2013-07-15 12:16 ` Koen Kooi
2013-07-15 12:25 ` Nishanth Menon
2013-07-15 13:07 ` Koen Kooi
2013-07-15 14:06 ` Nishanth Menon
2013-07-15 14:49 ` Tom Rini
2013-07-15 14:52 ` Koen Kooi
2013-07-18 16:13 ` Tom Rini
2013-07-18 18:42 ` Nishanth Menon
2013-07-15 12:11 ` [U-Boot] [PATCH V3 6/6] omap3_beagle: support booting from zImage and device tree as last option Nishanth Menon
2013-07-30 13:29 ` [U-Boot] [PATCH V3 0/6] omap3_beagle: configs: improve BOOT_CMD options Tom Rini
2013-07-11 21:52 ` [U-Boot] [PATCH 4/5] omap3_beagle: support findfdt and loadfdt for devicetree support Nishanth Menon
2013-07-11 22:02 ` Robert Nelson
2013-07-11 22:03 ` Nishanth Menon
2013-07-11 22:05 ` Robert Nelson
2013-07-11 22:17 ` Nishanth Menon
2013-07-11 23:17 ` Robert Nelson
2013-07-12 4:06 ` Nishanth Menon
2013-07-12 13:32 ` Robert Nelson
2013-07-12 14:28 ` Nishanth Menon
2013-07-11 21:52 ` [U-Boot] [PATCH 5/5] omap3_beagle: support booting from zImage and device tree as last option Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373582005-18556-2-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox