From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/10] TI:omap5: Convert to ti_armv7_common.h
Date: Fri, 2 Aug 2013 16:26:13 -0400 [thread overview]
Message-ID: <1375475175-5073-9-git-send-email-trini@ti.com> (raw)
In-Reply-To: <1375475175-5073-1-git-send-email-trini@ti.com>
Update omap5_common.h to use ti_armv7_common.h, and in turn update
dra7xx_evm.h and omap5_uevm.h slightly. The biggest changes here are
that IP blocks which exist on the platform, and had clocks enabled,
now have the drivers being built as well.
Signed-off-by: Tom Rini <trini@ti.com>
---
include/configs/dra7xx_evm.h | 11 +--
include/configs/omap5_common.h | 188 +++++-----------------------------------
include/configs/omap5_uevm.h | 8 +-
3 files changed, 31 insertions(+), 176 deletions(-)
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 51be73d..58786ff 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -12,21 +12,18 @@
#ifndef __CONFIG_DRA7XX_EVM_H
#define __CONFIG_DRA7XX_EVM_H
-/* High Level Configuration Options */
-#define CONFIG_DRA7XX /* in a TI DRA7XX core */
-#define CONFIG_ENV_IS_NOWHERE /* For now. */
-
-#include <configs/omap5_common.h>
+#define CONFIG_DRA7XX
-#define CONFIG_SYS_PROMPT "DRA752 EVM # "
+#define CONFIG_ENV_IS_NOWHERE /* For now. */
+#define CONSOLEDEV "ttyO0"
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_COM1 UART1_BASE
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_OMAP_ABE_SYSCK
-#define CONSOLEDEV "ttyO0"
+#include <configs/omap5_common.h>
/* CPSW Ethernet */
#define CONFIG_CMD_NET
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index 7dd56cf..469a081 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -14,106 +14,51 @@
#ifndef __CONFIG_OMAP5_COMMON_H
#define __CONFIG_OMAP5_COMMON_H
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP /* in a TI OMAP core */
-#define CONFIG_OMAP54XX /* which is a 54XX */
-#define CONFIG_OMAP_GPIO
-
-/* Get CPU defs */
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* Display CPU and Board Info */
+#define CONFIG_OMAP54XX
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-
#define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
+#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
+
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+/* Defines for SDRAM init */
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PALMAS_POWER
+#endif
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
-/*
- * Size of malloc() pool
- * Total Size Environment - 128k
- * Malloc - add 256k
- */
#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
-/* Vector Base */
-#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
-/*
- * Hardware drivers
- */
+#include <configs/ti_armv7_common.h>
/*
- * serial port - NS16550 compatible
+ * Hardware drivers
*/
-#define V_NS16550_CLK 48000000
-
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/* CPU */
-#define CONFIG_ARCH_CPU_INIT
-
-/* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
-#define CONFIG_I2C_MULTI_BUS
-
-/* MMC */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Flash */
-#define CONFIG_SYS_NO_FLASH
-
-/* Cache */
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_SYS_CACHELINE_SHIFT 6
+#define CONFIG_SYS_NS16550_CLK 48000000
-/* commands to include */
-#include <config_cmd_default.h>
-
-/* Enabled commands */
-#define CONFIG_CMD_EXT2 /* EXT2 Support */
-#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_I2C /* I2C serial bus support */
-#define CONFIG_CMD_MMC /* MMC support */
-
-/* Disabled commands */
+/* Per-SoC commands */
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMLS /* List all found images */
/*
* Environment setup
*/
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-
-#define CONFIG_ENV_OVERWRITE
-
#ifndef PARTS_DEFAULT
#define PARTS_DEFAULT
#endif
@@ -178,96 +123,11 @@
"fi; " \
"fi"
-#define CONFIG_AUTO_COMPLETE 1
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-
-/*
- * memtest setup
- */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20))
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x80000000
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT2_BASE
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
-
-/*
- * SDRAM Memory Map
- * Even though we use two CS all the memory
- * is mapped to one contiguous block
- */
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-
-/* Defines for SDRAM init */
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PALMAS_POWER
-#endif
/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40300350
#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_DISPLAY_PRINT
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-/*
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 80E7FFC0--0x80E80000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE 0x80E80000
-
-/*
- * BSS and malloc area 64MB into memory to allow enough
- * space for the kernel at the beginning of memory
- */
-#define CONFIG_SPL_BSS_START_ADDR 0x84000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
-#define CONFIG_SPL_GPIO_SUPPORT
-
#endif /* __CONFIG_OMAP5_COMMON_H */
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 47568e9..d10c2b5 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -17,8 +17,6 @@
"uuid_disk=${uuid_gpt_disk};" \
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
-#include <configs/omap5_common.h>
-
#define CONFIG_CONS_INDEX 3
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
#define CONFIG_BAUDRATE 115200
@@ -42,9 +40,9 @@
#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
-#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # "
-
#define CONSOLEDEV "ttyO2"
-
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
+
+#include <configs/omap5_common.h>
+
#endif /* __CONFIG_OMAP5_EVM_H */
--
1.7.9.5
next prev parent reply other threads:[~2013-08-02 20:26 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-02 20:26 [U-Boot] [PATCH 00/10] Introduce common config file for TI ARMv7 platforms Tom Rini
2013-08-02 20:26 ` [U-Boot] [PATCH 01/10] am33xx: Move V_OSCK/V_SCLK to <asm/arch-am33xx/clocks_am33xx.h> Tom Rini
2013-08-03 4:41 ` Heiko Schocher
2013-08-05 15:17 ` Tom Rini
2013-08-05 15:26 ` Lars Poeschel
2013-08-05 15:40 ` Tom Rini
2013-08-05 15:53 ` Tom Rini
2013-08-02 20:26 ` [U-Boot] [PATCH 02/10] am33xx: CONFIG_DMA_COHERENT defines are unused, remove Tom Rini
2013-08-06 18:25 ` Dan Murphy
2013-08-02 20:26 ` [U-Boot] [PATCH 03/10] am33xx: Stop using PHYS_DRAM_1 define Tom Rini
2013-08-02 20:26 ` [U-Boot] [PATCH 04/10] am335x_evm: Use default baud rate table Tom Rini
2013-08-02 20:26 ` [U-Boot] [PATCH 05/10] arm: spl: For Falcon Mode, set a default machid of ~0 Tom Rini
2013-08-05 3:53 ` Heiko Schocher
2013-08-06 18:28 ` Dan Murphy
2013-08-06 19:10 ` Tom Rini
2013-08-06 20:03 ` Dan Murphy
2013-08-02 20:26 ` [U-Boot] [PATCH 06/10] am335x_evm: Bring in 'boot_fdt' logic from i.MX Tom Rini
2013-08-02 20:26 ` [U-Boot] [PATCH 07/10] TI:am33xx: Create common config files for TI ARMv7 platforms, and AM33xx Tom Rini
2013-08-06 18:33 ` Dan Murphy
2013-08-06 19:11 ` Tom Rini
2013-08-02 20:26 ` Tom Rini [this message]
2013-08-06 18:37 ` [U-Boot] [PATCH 08/10] TI:omap5: Convert to ti_armv7_common.h Dan Murphy
2013-08-06 19:13 ` Tom Rini
2013-08-06 19:24 ` Dan Murphy
2013-08-06 18:38 ` Dan Murphy
2013-08-02 20:26 ` [U-Boot] [PATCH 09/10] TI:armv7: Enable CONFIG_CMD_SPI Tom Rini
2013-08-06 18:34 ` Dan Murphy
2013-08-06 18:50 ` Jagan Teki
2013-08-06 18:55 ` Jagan Teki
2013-08-06 19:03 ` Tom Rini
2013-08-06 19:10 ` Jagan Teki
2013-08-02 20:26 ` [U-Boot] [PATCH 10/10] TI:armv7: Enable CONFIG_CMD_GPIO Tom Rini
2013-08-06 18:34 ` Dan Murphy
2013-08-03 4:51 ` [U-Boot] [PATCH 00/10] Introduce common config file for TI ARMv7 platforms Heiko Schocher
2013-08-05 15:39 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375475175-5073-9-git-send-email-trini@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox