From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 03/12] omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon SRAM_SCRATCH_SPACE_ADDR
Date: Tue, 20 Aug 2013 08:53:45 -0400 [thread overview]
Message-ID: <1377003234-16792-4-git-send-email-trini@ti.com> (raw)
In-Reply-To: <1377003234-16792-1-git-send-email-trini@ti.com>
After examining both TRMs and doing some experimentation, we can rely on
using the start of the download area for CONFIG_SPL_TEXT_BASE and then
move SRAM_SCRATCH_SPACE_ADDR up, just like am335x. This is required for
peripheral boot modes such as UART.
Signed-off-by: Tom Rini <trini@ti.com>
---
arch/arm/include/asm/arch-omap5/omap.h | 11 ++++++++++-
include/configs/omap5_common.h | 4 ++--
2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 597c692..e9a51d3 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -153,6 +153,15 @@ struct s32ktimer {
#define EFUSE_4 0x45145100
#endif /* __ASSEMBLY__ */
+/*
+ * In all cases, the TRM defines the RAM Memory Map for the processor
+ * and indicates the area for the downloaded image. We use all of that
+ * space for download and once up and running may use other parts of the
+ * map for our needs. We set a scratch space that is at the end of the
+ * OMAP5 download area, but within the DRA7xx download area (as it is
+ * much larger) and do not, at this time, make use of the additional
+ * space.
+ */
#ifdef CONFIG_DRA7XX
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
@@ -160,7 +169,7 @@ struct s32ktimer {
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
#endif
-#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
+#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4031F000
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index 8e82fed..0345c57 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -128,8 +128,8 @@
/* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE 0x40300350
-#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */
+#define CONFIG_SPL_TEXT_BASE 0x40300000
+#define CONFIG_SPL_MAX_SIZE (0x4031E000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_DISPLAY_PRINT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
--
1.7.9.5
next prev parent reply other threads:[~2013-08-20 12:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-20 12:53 [U-Boot] [PATCH 00/12] am33xx/omap5: Improve docs for customization Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 01/12] am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZE Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 02/12] TI:armv7: Move CONFIG_SPL_LIBDISK_SUPPORT to MMC section Tom Rini
2013-08-20 12:53 ` Tom Rini [this message]
2013-08-21 5:22 ` [U-Boot] [PATCH 03/12] omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon SRAM_SCRATCH_SPACE_ADDR Sricharan R
2013-08-21 13:49 ` Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 04/12] TI:am335x: Better comment and organize the networking related options Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 05/12] am335x_evm: Add comment by SPL SPI support Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 06/12] am335x_evm: Regroup USB options Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 07/12] TI:armv7: Re-order slightly the generic CONFIG options, expand related comments Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 08/12] am335x_evm: Update README for customization Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 09/12] TI:am33xx: Move SPL YMODEM support to the per-board config Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 10/12] TI:omap5: Clarify comments about SPL and DDR timings in common config Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 11/12] omap5_uevm: Better comment why we have TCA642X and the reset time Tom Rini
2013-08-20 12:53 ` [U-Boot] [PATCH 12/12] dra7xx_evm: Re-order and comment the networking related config options Tom Rini
2013-08-28 18:25 ` [U-Boot] [PATCH 00/12] am33xx/omap5: Improve docs for customization Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377003234-16792-4-git-send-email-trini@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox