[U-Boot] [PATCH v2 1/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform

[Scott Wood <scottwood@freescale.com>]

On Wed, 2013-08-14 at 11:46 +0530, Pekon Gupta wrote:
> BCH8_ECC scheme implemented in omap_gpmc.c driver has following two favours
> +-----------------------------------+-----------------+-----------------+
> |ECC Scheme                         | ECC Calculation | Error Detection |
> +-----------------------------------+-----------------+-----------------+
> |OMAP_ECC_BCH8_CODE_HW              |GPMC             |ELM H/W engine   |
> |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |GPMC             |S/W BCH library  |
> +-----------------------------------+-----------------+-----------------+
> 
> Current implementation enables of BCH8_CODE_HW only for AM33xx SoC family.
> (using CONFIG_AM33XX). However, other SoC families (like TI81xx) also have
> ELM hardware module, and can support ECC error detection using ELM.
> 
> This patch
> - replaces CONFIG_AM33xx define with
> 	CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW
>   so that all device families having required h/w capability can use ELM for
>   error detection in ECC_BCHx schemes.
> 
> - replaces CONFIG_NAND_OMAP_BCH8 with
> 	CONFIG_NAND_OMAP_ECC_BCH8_CODE_HW_DETECTION_SW && CONFIG_BCH
>   and separates out code for above mentioned BCH8_ECC implementations so that
>   driver can be build independently using anyone of them.
>   CONFIG_BCH is used to enable software BCH library in lib/bch.c
> 
> Signed-off-by: Pekon Gupta <pekon@ti.com>
> ---
>  doc/README.nand              |  20 +++++++
>  drivers/mtd/nand/omap_gpmc.c | 128 ++++++++++++++++++++++++-------------------
>  include/configs/am335x_evm.h |   1 +
>  include/configs/ti814x_evm.h |   2 +-
>  include/configs/tricorder.h  |   2 +-
>  5 files changed, 96 insertions(+), 57 deletions(-)

The ti814x_evm.h changes do not apply.  What tree is this against?

Can someone familiar with the OMAP driver review this patchset?

-Scott