[U-Boot] [PATCH] mxs_nand: Fix ECC strength for NAND flash with OOB size of 224

[Elie De Brauwer <eliedebrauwer@gmail.com>]

On a board with an i.mx28 and a Micron MT29F4G08ABAEAH4, Linux says:

NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABAEAH4),
512MiB, page size: 4096, OOB size: 224) the ECC strength is 16.

root@(none):/sys/devices/virtual/mtd/mtd0# for i in ecc_strength oobsize subpagesize; do echo $i = `cat $i`; done
ecc_strength = 16
oobsize = 224
subpagesize = 4096

The ECC strength was not properly discovered by U-Boot causing the data
written by Linux to return an -74 (EBADMSG) when read from U-Boot. This
patch fixes mxs_nand_get_ecc_strength() to function in case of a NAND
flash with page_data_size = 4096 and page_oob_size= 224.

Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
---
 drivers/mtd/nand/mxs_nand.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 378f8c5..036c113 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -155,6 +155,9 @@ static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
 
 		if (page_oob_size == 218)
 			return 16;
+
+		if (page_oob_size == 224)
+			return 16;
 	}
 
 	return 0;
-- 
1.7.10.4