[U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write

[Kuo-Jung Su <dantesu@gmail.com>]

From: Kuo-Jung Su <dantesu@faraday-tech.com>

The local pointer of address (i.e., addr) only gets
referenced in SPI mode, and it won't be appropriate
to pass only 1 bytes addr[1] to i2c_read/i2c_write while
CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 1.

To avoid ambiguity, this patch would drop the use of
address pointer in I2C mode, and directly pass (dev_addr, offset)
to i2c_read/i2c_write.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Mischa Jonker <mjonker@synopsys.com>
---
 Changes for v2:
  - Initial release

 common/cmd_eeprom.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 02539c4..0edc259 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -161,7 +161,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
 		spi_read (addr, alen, buffer, len);
 #else
-		if (i2c_read (addr[0], addr[1], alen-1, buffer, len) != 0)
+		if (i2c_read (dev_addr, offset, alen-1, buffer, len) != 0)
 			rcode = 1;
 #endif
 		buffer += len;
@@ -339,7 +339,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		/* Write is enabled ... now write eeprom value.
 		 */
 #endif
-		if (i2c_write (addr[0], addr[1], alen-1, buffer, len) != 0)
+		if (i2c_write (dev_addr, offset, alen-1, buffer, len) != 0)
 			rcode = 1;

 #endif
--
1.7.9.5