From: Sergei Ianovich <ynvich@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/5] arm: pxa: update LP-8x4x to boot DT kernel
Date: Tue, 17 Dec 2013 05:03:43 +0400 [thread overview]
Message-ID: <1387242224-22495-5-git-send-email-ynvich@gmail.com> (raw)
In-Reply-To: <1387242224-22495-1-git-send-email-ynvich@gmail.com>
DT kernel requires CONFIG_OF_LIBFDT. 'bootm' needs to know DT location.
In addition, fix kernel console device and enable U-Boot long help.
Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
CC: Marek Vasut <marex@denx.de>
---
Changes v1..v2
* don't disable USB
* update serial console
include/configs/lp8x4x.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 565940c..501b94a 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -20,18 +20,18 @@
#define CONFIG_SYS_MALLOC_LEN (128*1024)
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOOTCOMMAND \
- "bootm 80000;"
+ "bootm 80000 - 240000;"
#define CONFIG_BOOTARGS \
- "console=ttySA0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
- "init=/sbin/init rootfstype=ext3"
+ "console=ttyS0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
+ "init=/sbin/init rootfstype=ext4 rootwait"
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_LZMA /* LZMA compression support */
-#undef CONFIG_OF_LIBFDT
+#define CONFIG_OF_LIBFDT
/*
* Serial Console Configuration
@@ -101,7 +101,7 @@
*/
#define CONFIG_SYS_HUSH_PARSER 1
-#undef CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_LONGHELP
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "$ "
#else
--
1.8.5.1
next prev parent reply other threads:[~2013-12-17 1:03 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-14 5:41 [U-Boot] [PATCH 0/4] fix and update LP-8x4x to boot DTS kernel Sergei Ianovich
2013-12-14 5:41 ` [U-Boot] [PATCH 1/4] ARM: pxa: prevent PXA270 occasional reboot freezes Sergei Ianovich
2013-12-14 12:29 ` Marek Vasut
2013-12-14 15:31 ` Sergei Ianovich
2013-12-14 17:14 ` Marek Vasut
2013-12-14 23:51 ` Sergei Ianovich
2013-12-15 5:17 ` Marek Vasut
2013-12-15 9:48 ` Sergei Ianovich
2013-12-15 15:04 ` Marek Vasut
2013-12-14 5:41 ` [U-Boot] [PATCH 2/4] arm: pxa: always init ethaddr for LP-8x4x Sergei Ianovich
2013-12-14 12:30 ` Marek Vasut
2013-12-14 15:39 ` Sergei Ianovich
2013-12-14 17:12 ` Marek Vasut
2013-12-14 20:53 ` Sergei Ianovich
2013-12-14 20:57 ` Marek Vasut
2013-12-14 23:53 ` Sergei Ianovich
2013-12-15 5:17 ` Marek Vasut
2013-12-15 9:44 ` Sergei Ianovich
2013-12-15 15:05 ` Marek Vasut
2013-12-15 18:43 ` Sergei Ianovich
2013-12-14 5:41 ` [U-Boot] [PATCH 3/4] arm: pxa: fix 2nd flash chip address on LP-8x4x Sergei Ianovich
2013-12-14 5:42 ` [U-Boot] [PATCH 4/4] arm: pxa: update LP-8x4x to boot DTS kernel Sergei Ianovich
2013-12-14 12:32 ` Marek Vasut
2013-12-14 15:41 ` Sergei Ianovich
2013-12-14 17:05 ` Marek Vasut
2013-12-15 9:57 ` Sergei Ianovich
2013-12-15 15:06 ` Marek Vasut
2013-12-15 18:56 ` Sergei Ianovich
2013-12-15 19:22 ` Marek Vasut
2013-12-17 1:07 ` Sergei Ianovich
2013-12-17 1:03 ` [U-Boot] [PATCH v2 0/5] fix and update LP-8x4x to boot DT kernel Sergei Ianovich
2013-12-17 1:03 ` [U-Boot] [PATCH v2 1/5] ARM: pxa: prevent PXA270 occasional reboot freezes Sergei Ianovich
2013-12-17 1:03 ` [U-Boot] [PATCH v2 2/5] arm: pxa: fix LP-8x4x USB support Sergei Ianovich
2013-12-18 15:01 ` Marek Vasut
2013-12-18 16:19 ` [U-Boot] [PATCH v3] " Sergei Ianovich
2013-12-18 17:15 ` Marek Vasut
2013-12-17 1:03 ` [U-Boot] [PATCH v2 3/5] arm: pxa: fix 2nd flash chip address on LP-8x4x Sergei Ianovich
2013-12-17 1:03 ` Sergei Ianovich [this message]
2013-12-17 1:03 ` [U-Boot] [PATCH v2 5/5] arm: pxa: init ethaddr for LP-8x4x using DT Sergei Ianovich
2013-12-18 15:01 ` [U-Boot] [PATCH v2 0/5] fix and update LP-8x4x to boot DT kernel Marek Vasut
2013-12-18 16:21 ` Sergei Ianovich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387242224-22495-5-git-send-email-ynvich@gmail.com \
--to=ynvich@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox