[U-Boot] [PATCH v2 5/5] arm: pxa: init ethaddr for LP-8x4x using DT

[Sergei Ianovich <ynvich@gmail.com>]

When DT define aliases for etherner0 and ethernet1, U-Boot
automatically patched MAC addresses using ethaddr and eth1addr
environment variables respectively.

Custom initialization is no longer needed.

Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
CC: Marek Vasut <marex@denx.de>
---
 Changes v1..v2
 * use alias instead of manual updating as suggested by Marek Vasut

 board/icpdas/lp8x4x/lp8x4x.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c
index 0888960..a7a2e21 100644
--- a/board/icpdas/lp8x4x/lp8x4x.c
+++ b/board/icpdas/lp8x4x/lp8x4x.c
@@ -114,25 +114,8 @@ int usb_board_stop(void)
 #endif
 
 #ifdef CONFIG_DRIVER_DM9000
-void lp8x4x_eth1_mac_init(void)
-{
-	u8 eth1addr[8];
-	int i;
-	u8 reg;
-
-	eth_getenv_enetaddr_by_index("eth", 1, eth1addr);
-	if (!is_valid_ether_addr(eth1addr))
-		return;
-
-	for (i = 0, reg = 0x10; i < 6; i++, reg++) {
-		writeb(reg, (u8 *)(DM9000_IO_2));
-		writeb(eth1addr[i], (u8 *)(DM9000_DATA_2));
-	}
-}
-
 int board_eth_init(bd_t *bis)
 {
-	lp8x4x_eth1_mac_init();
 	return dm9000_initialize(bis);
 }
 #endif
-- 
1.8.5.1