[U-Boot] [PATCH v2 4/6] PPC 85xx: Find CCSRBAR on ppce500 from device tree

[Scott Wood <scottwood@freescale.com>]

On Fri, 2014-01-31 at 12:16 +0100, Alexander Graf wrote:
> The definition of our ppce500 PV machine is that every address is dynamically
> determined through device tree bindings.
> 
> So don't hardcode where CCSR is in our physical memory layout but instead
> read it dynamically from the device tree we get passed on boot.
> 
> Signed-off-by: Alexander Graf <agraf@suse.de>
> ---
>  arch/powerpc/cpu/mpc85xx/start.S            |    2 +
>  board/freescale/qemu-ppce500/qemu-ppce500.c |   83 +++++++++++++++++++++++++++
>  include/configs/qemu-ppce500.h              |   12 +++-
>  3 files changed, 96 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
> index 0e593d2..2672c20 100644
> --- a/arch/powerpc/cpu/mpc85xx/start.S
> +++ b/arch/powerpc/cpu/mpc85xx/start.S
> @@ -519,6 +519,7 @@ nexti:	mflr	r1		/* R1 = our PC */
>   * As a general rule, TLB0 is used for short-term TLBs, and TLB1 is used for
>   * long-term TLBs, so we use TLB0 here.
>   */
> +#if !defined(CONFIG_DYNAMIC_CCSRBAR)
>  #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
>  
>  #if !defined(CONFIG_SYS_CCSRBAR_PHYS_HIGH) || !defined(CONFIG_SYS_CCSRBAR_PHYS_LOW)
> @@ -703,6 +704,7 @@ delete_temp_tlbs:
>  	delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3
>  
>  #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
> +#endif /* #if !defined(CONFIG_DYNAMIC_CCSRBAR) */
>  
>  #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
>  create_ccsr_l2_tlb:
> diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c b/board/freescale/qemu-ppce500/qemu-ppce500.c
> index b33b6b1..6491ae9 100644
> --- a/board/freescale/qemu-ppce500/qemu-ppce500.c
> +++ b/board/freescale/qemu-ppce500/qemu-ppce500.c
> @@ -26,6 +26,89 @@ static const void *get_fdt(void)
>  	return gd->fdt_blob;
>  }
>  
> +uint64_t get_phys_ccsrbar_addr(void)
> +{
> +	const void *fdt = get_fdt();
> +	int root_node = fdt_path_offset(fdt, "/");
> +	int soc_node = fdt_path_offset(fdt, "/soc");
> +	const uint32_t *prop;
> +	const uint64_t *prop64;
> +	int len;
> +	int root_address_cells = 1;
> +	int address_cells = 1;
> +	uint64_t r = 0;
> +
> +	/* Read CCSRBAR address length and size from device tree */
> +	prop = fdt_getprop(fdt, root_node, "#address-cells", &len);
> +	if (prop && (len >= 4))
> +		root_address_cells = prop[0];
> +
> +	prop = fdt_getprop(fdt, soc_node, "#address-cells", &len);
> +	if (prop && (len >= 4))
> +		address_cells = prop[0];
> +
> +	/* Read CCSRBAR address from device tree */
> +	prop = fdt_getprop(fdt, soc_node, "ranges", &len);
> +	if (prop && (len >= ((address_cells + root_address_cells) * 4))) {
> +		/* The physical address starts after the child's offset */
> +		prop += address_cells;
> +		prop64 = (const uint64_t *)prop;
> +
> +		if (root_address_cells == 1)
> +			r = prop[0];
> +		else if (root_address_cells == 2)
> +			r = prop64[0];
> +	}
> +
> +	if (!r)
> +		panic("Couldn't find CCSR in FDT");
> +
> +	return r;
> +}
> +
> +uint64_t get_phys_ccsrbar_addr_early(void)
> +{
> +	u32 mas0, mas1, mas2, mas3, mas7;
> +	ulong fdt = (ulong)get_fdt();
> +	uint64_t r;
> +
> +	/*
> +	 * To be able to read the FDT we need to create a temporary TLB
> +	 * map for it.
> +	 */
> +
> +	mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(10);
> +	mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M);
> +	mas2 = FSL_BOOKE_MAS2(fdt, 0);
> +	mas3 = FSL_BOOKE_MAS3(fdt, 0, MAS3_SW|MAS3_SR);
> +	mas7 = FSL_BOOKE_MAS7(fdt);
> +
> +	write_tlb(mas0, mas1, mas2, mas3, mas7);
> +
> +	r = get_phys_ccsrbar_addr();
> +
> +	disable_tlb(10);
> +
> +	return r;
> +}
> +
> +int board_early_init_f(void)
> +{
> +	u32 mas0, mas1, mas2, mas3, mas7;
> +	uint64_t phys_ccsr_address = get_phys_ccsrbar_addr();
> +
> +	/* Extend the CCSR map from cpu_init_early_f() */
> +	mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13);
> +	mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TSIZE(BOOKE_PAGESZ_64M);
> +	mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
> +	mas3 = FSL_BOOKE_MAS3(phys_ccsr_address, 0, MAS3_SW|MAS3_SR);
> +	mas7 = FSL_BOOKE_MAS7(phys_ccsr_address);
> +
> +	write_tlb(mas0, mas1, mas2, mas3, mas7);
> +
> +	return 0;
> +}
> +
>  int checkboard(void)
>  {
>  	return 0;

You're adding new code to map CCSR and FDT, but not removing the code to
do the same thing you added in patch 3/6.

Why 64M?

> diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
> index 1ebaf51..7ef7235 100644
> --- a/include/configs/qemu-ppce500.h
> +++ b/include/configs/qemu-ppce500.h
> @@ -44,8 +44,18 @@
>  #define CONFIG_SYS_ALT_MEMTEST
>  #define CONFIG_PANIC_HANG	/* do not reset board on panic */
>  
> +/* Needed to fill the ccsrbar pointer */
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> +/* Virtual address to CCSRBAR */
>  #define CONFIG_SYS_CCSRBAR		0xe0000000
> -#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
> +/* Physical address should be a function call */
> +#ifndef __ASSEMBLY__
> +extern unsigned long long get_phys_ccsrbar_addr_early(void);
> +#endif
> +#define CONFIG_SYS_CCSRBAR_PHYS_LOW	((uint32_t)get_phys_ccsrbar_addr_early())
> +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	(get_phys_ccsrbar_addr_early() >> 32)
> +#define CONFIG_DYNAMIC_CCSRBAR
>  

What cares about CONFIG_SYS_CCSRBAR_PHYS* other than the code you
skipped with an ifndef in start.S, and related header ifdeffery (which
could be skipped by the existing CONFIG_SYS_CCSR_DO_NOT_RELOCATE
instead)?

-Scott