[U-Boot] [PATCH v2] designware_i2c: Enhance DesignWare I2C driver address support

[Chin Liang See <clsee@altera.com>]

Hi Heiko,

On Thu, 2014-01-30 at 06:20 +0100, Heiko Schocher wrote:
> Hello Chin,
> 
> Am 22.01.2014 16:37, schrieb Chin Liang See:
> > Thanks Alexey.
> >
> > Hi Heiko,
> >
> > I believe this patch should be good for apply. Would need your help
> > then. :) Thanks
> >
> > Chin Liang
> >
> >
> > On Wed, 2014-01-15 at 15:51 +0000, Alexey Brodkin wrote:
> >> On Wed, 2014-01-15 at 09:45 -0600, Chin Liang See wrote:
> >>> Changes for v2
> >>> - Removed the function check_params()
> >>
> >> Ok, so you decided to not add "assert" check instead.
> >> I think it's ok - it's not a requirement. Others don't do it as well so
> >> let's leave it as it is.
> >>
> >> Acked-by: Alexey Brodkin<abrodkin@synopsys.com>
> >>
> >> Regards,
> >> Alexey
> 
> Your patch apply not clean to current head f889cc81c1572f4af0be950fd49bb6b67bc580fb
> also checkpatch drops one warning:
> 

Yup, it caused by a later patch. Let me re-base my patch.

> CHECK: Alignment should match open parenthesis
> #82: FILE: drivers/i2c/designware_i2c.c:210:
> +               writel((addr >> (alen * 8)) & 0xff,
> +                       &i2c_regs_p->ic_cmd_data);
> 
> total: 0 errors, 0 warnings, 1 checks, 64 lines checked

I overlooked this as I saw no errors. Let me fix that too.
Thanks again for your helps.

Chin Liang

> 
> Could you please fix this, thanks!
> 
> bye,
> Heiko