From: Axel Lin <axel.lin@ingics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] spi: atmel_dataflash: Simplify AT91F_SpiEnable implementation
Date: Fri, 21 Feb 2014 08:55:47 +0800 [thread overview]
Message-ID: <1392944147.4125.1.camel@phoenix> (raw)
Refactor the code a bit to make it better in readability.
Remove the comments because now the intention of the code is pretty clear.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/spi/atmel_dataflash_spi.c | 31 ++++++++++++-------------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c
index 8a5eddc..a2e9c00 100644
--- a/drivers/spi/atmel_dataflash_spi.c
+++ b/drivers/spi/atmel_dataflash_spi.c
@@ -102,33 +102,26 @@ void AT91F_SpiEnable(int cs)
{
unsigned long mode;
+ mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
+ mode &= ~AT91_SPI_PCS;
+
switch (cs) {
- case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */
- mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
- mode &= 0xFFF0FFFF;
- writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- ATMEL_BASE_SPI0 + AT91_SPI_MR);
+ case 0:
+ mode |= AT91_SPI_PCS0_DATAFLASH_CARD << 16;
break;
- case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */
- mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
- mode &= 0xFFF0FFFF;
- writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- ATMEL_BASE_SPI0 + AT91_SPI_MR);
+ case 1:
+ mode |= AT91_SPI_PCS1_DATAFLASH_CARD << 16;
break;
- case 2: /* Configure SPI CS2 for Serial DataFlash AT45DBxx */
- mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
- mode &= 0xFFF0FFFF;
- writel(mode | ((AT91_SPI_PCS2_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- ATMEL_BASE_SPI0 + AT91_SPI_MR);
+ case 2:
+ mode |= AT91_SPI_PCS2_DATAFLASH_CARD << 16;
break;
case 3:
- mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
- mode &= 0xFFF0FFFF;
- writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- ATMEL_BASE_SPI0 + AT91_SPI_MR);
+ mode |= AT91_SPI_PCS3_DATAFLASH_CARD << 16;
break;
}
+ writel(mode, ATMEL_BASE_SPI0 + AT91_SPI_MR);
+
/* SPI_Enable */
writel(AT91_SPI_SPIEN, ATMEL_BASE_SPI0 + AT91_SPI_CR);
}
--
1.8.1.2
reply other threads:[~2014-02-21 0:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392944147.4125.1.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox