From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ian Campbell Date: Fri, 7 Mar 2014 01:20:56 +0000 Subject: [U-Boot] [PATCH v3 1/4] ahci-plat: Provide a weak scsi_init hook In-Reply-To: <1394155172.13270.18.camel@hastur.hellion.org.uk> References: <1394155172.13270.18.camel@hastur.hellion.org.uk> Message-ID: <1394155259-21897-1-git-send-email-ijc@hellion.org.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This allow the platform to register the platform ahci device. Signed-off-by: Ian Campbell --- In theory this could perhaps be used by highbank. I have access to a Midway system (close enough for testing purposes, I think) but since Calxeda has folded I'm not sure it is worth it, and I am not entirely keen on reflashing firmware on the system I have access too (no safety net)... --- arch/arm/lib/board.c | 6 ++++++ drivers/block/ahci.c | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 34f50b0..fe381a3 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -593,6 +594,11 @@ void board_init_r(gd_t *id, ulong dest_addr) mmc_initialize(gd->bd); #endif +#ifdef CONFIG_CMD_SCSI + puts("SCSI: "); + scsi_init(); +#endif + #ifdef CONFIG_HAS_DATAFLASH AT91F_DataflashInit(); dataflash_print_info(); diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 0daad36..d5370fa 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -924,6 +924,11 @@ int ahci_init(u32 base) err_out: return rc; } + +void __weak scsi_init(void) +{ +} + #endif /* -- 1.8.5.3