* [U-Boot] How to test vlan in u-boot
@ 2014-04-18 6:42 diya
0 siblings, 0 replies; only message in thread
From: diya @ 2014-04-18 6:42 UTC (permalink / raw)
To: u-boot
Hi ,
I am using an 8 port switch (MV88E6131) in our customized board with P2020
Processor.
Following is the set up in our board,
Port 6 -> CPU port
Port0 / Port1 / Port2 connected to phy
Port3 -> No connection
Port 4 / Port 5 connected to DSP's
Port 7 routed to back plane , SGMII connection.
I tried grouping port0,port1,port2 as one LAN-A and Port 4,5,7 as LANB.
Such that both LAN A and B cannot communicate with each other , but both can
send frame to CPU PORT.
After this i got stuck and dono how to proceed further and test it.
Please guide me in this to solve.
--
View this message in context: http://u-boot.10912.n7.nabble.com/How-to-test-vlan-in-u-boot-tp178161.html
Sent from the U-Boot mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-04-18 6:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-18 6:42 [U-Boot] How to test vlan in u-boot diya
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox