[U-Boot] [PATCH v4 0/5] Android Fastboot support

[Rob Herring <robherring2@gmail.com>]

From: Rob Herring <robh@kernel.org>

This is the 2nd version since I revived the fastboot patches Sebastian 
submitted.

I'm reviving the Android Fastboot support after 2+ years since the last 
posting[1]. The previous postings had some questions about licensing 
and source of some code. I believe I've traced the history sufficiently 
that the copyrights and source information are complete and correct.

The Android code used or referenced is BSD 2-clause license. This was 
originally raised by Wolfgang that it was not compatible with GPLv2+. I 
believe that has since been demonstrated and agreed that the BSD 
2-clause license is compatible with u-boot. 

As far as the history of the code, I have traced that back. The u-boot 
code started in 2008/2009 by Tom Rix @ Windriver. This initial support 
was then adopted and extended by TI (eMMC support primarily, not 
included here) in their OMAP u-boot tree[2]. In 2011, the TI code was 
used as a basis for upstream patches by Sebastian Siewior @ Linutronix. 
The code has been rearranged quite a bit since the original, but the 
content is pretty much the same. Some of the re-arranging left stale or 
missing copyrights in the v2 version which I have corrected.

I've redone the fastboot code significantly to use the USB download 
gadget composite driver. With this, I've consolidated the fastboot 
function into a single file. I believe I've addressed all the review 
comments, but many don't apply with the re-write.

I dropped the patch adding a loadsize env variable and added config 
uptions instead to set the fastboot buffer size.

I've tested this series on a BeagleBoard.

Rob

[1] http://lists.denx.de/pipermail/u-boot/2011-November/110557.html
[2] http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=601ff71c8d46b5e90e13613974a16d10f2006bb3

Rob Herring (3):
  usb: handle NULL table in usb_gadget_get_string
  usb: musb: fill in usb_gadget_unregister_driver
  arm: beagle: enable Android fastboot support

Sebastian Siewior (2):
  image: add support for Android's boot image format
  usb/gadget: add the fastboot gadget

 common/Makefile                      |   3 +
 common/cmd_bootm.c                   |  23 +-
 common/cmd_fastboot.c                |  36 +++
 common/image-android.c               |  84 ++++++
 common/image.c                       |  20 +-
 doc/README.android-fastboot          |  91 ++++++
 doc/README.android-fastboot-protocol | 170 ++++++++++++
 drivers/usb/gadget/Makefile          |   1 +
 drivers/usb/gadget/f_fastboot.c      | 518 +++++++++++++++++++++++++++++++++++
 drivers/usb/gadget/g_dnl.c           |   6 +
 drivers/usb/gadget/usbstring.c       |   3 +
 drivers/usb/musb-new/musb_uboot.c    |   5 +-
 include/android_image.h              |  69 +++++
 include/configs/omap3_beagle.h       |  10 +
 include/fastboot.h                   |  22 ++
 include/image.h                      |  13 +
 16 files changed, 1067 insertions(+), 7 deletions(-)
 create mode 100644 common/cmd_fastboot.c
 create mode 100644 common/image-android.c
 create mode 100644 doc/README.android-fastboot
 create mode 100644 doc/README.android-fastboot-protocol
 create mode 100644 drivers/usb/gadget/f_fastboot.c
 create mode 100644 include/android_image.h
 create mode 100644 include/fastboot.h

-- 
1.9.1