From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ian Campbell Date: Mon, 28 Apr 2014 20:14:05 +0100 Subject: [U-Boot] [PATCH] net/designware: call phy_connect_dev() to properly setup phylib device Message-ID: <1398712445-24624-1-git-send-email-ijc@hellion.org.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This sets up the linkage from the phydev back to the ethernet device. This symptom of not doing this which I noticed was: Waiting for PHY auto negotiation to complete.... rather than: dwmac.1c50000 Waiting for PHY auto negotiation to complete.... Signed-off-by: Ian Campbell Cc: Alexey Brodkin --- drivers/net/designware.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/designware.c b/drivers/net/designware.c index c9afe16..b8a7631 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -390,6 +390,8 @@ static int dw_phy_init(struct eth_device *dev) if (!phydev) return -1; + phy_connect_dev(phydev, dev); + phydev->supported &= PHY_GBIT_FEATURES; phydev->advertising = phydev->supported; -- 1.9.0