From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ash Charles Date: Tue, 29 Apr 2014 16:15:24 -0700 Subject: [U-Boot] [PATCH 4/8] OMAP3: overo: eliminate hard-coded partition offsets In-Reply-To: <1398813328-17365-1-git-send-email-ashcharles@gmail.com> References: <1398813328-17365-1-git-send-email-ashcharles@gmail.com> Message-ID: <1398813328-17365-5-git-send-email-ashcharles@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The linux kernel is at nand0,3 using the current layout, but is best accessed through the partition label "linux". Since CONFIG_CMD_MTDPARTS is defined the CONFIG_JFFS2 settings are unreferenced; use "setenv partition rootfs" to set the default mtd partition for jffs2. Signed-off-by: Peter A. Bigot Tested-by: Ash Charles --- include/configs/omap3_overo.h | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 321e110..706c8cc 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -154,14 +154,6 @@ /* at CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - /* Environment information */ #define CONFIG_BOOTDELAY 5 @@ -207,7 +199,7 @@ "bootm ${loadaddr}\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ + "nand read ${loadaddr} linux; " \ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ -- 1.8.3.2