[U-Boot] Mainline u-boot SPL for socfpga

[Chin Liang See <clsee@altera.com>]

Hi,

On Thu, 2014-05-15 at 07:01 +1200, Charles Manning wrote:
> On Thursday 15 May 2014 04:42:58 Pavel Machek wrote:
> > Hi!
> >
> > > I am trying to understand the state of the socfpga preloader in mainline
> > > u-boot.
> > >
> > > >From what I see, this is broken and perhaps has never worked.
> >
> > That's correct AFAICT.


Yup, Preloader without the SDRAM would not work correctly.


> >
> > > When I build the code in u-boot-socfpga I get a healthy working
> > > u-boot-spl.bin of approx 45kbytes.
> > >
> > > When I build the mainline u-boot code I get a broken u-boot-spl.bin of
> > > approx 3kbytes.
> > >
> > > It seems the mainline u-boot is missing stuff, including the all-critical
> > > sdram initialisation without which the SPL is useless.
> >
> > Are you able to build working u-boot proper from recent sources?
> >
> > I know u-boot SPL misses critical parts, but I was told that u-boot
> > proper should have everything. Only... I was not able to get it to
> > work. [I'm attempting to load recent u-boot from patched/old u-boot; I
> > know this is not exactly recommended, but due to spl/proper split, it
> > should work AFAIK... and does for old versions.]
> 
> I have not tried booting u-boot proper from mainline. It just seemed pointless 
> to me to be working from 2 source trees to make a single product.
> 
> I will give it a go though.


Actually the U-Boot is working. You just need to #undef
CONFIG_SOCFPGA_VIRTUAL_TARGET and build it. I loaded it using a working
Preloader and I can reach the U-Boot console.

U-Boot SPL 2013.01.01 (May 16 2014 - 10:42:39)
BOARD : Altera SOCFPGA Cyclone V Board
CLOCK: EOSC1 clock 25000 KHz
CLOCK: EOSC2 clock 25000 KHz
CLOCK: F2S_SDR_REF clock 0 KHz
CLOCK: F2S_PER_REF clock 0 KHz
CLOCK: MPU clock 925 MHz
CLOCK: DDR clock 400 MHz
CLOCK: UART clock 100000 KHz
CLOCK: MMC clock 50000 KHz
CLOCK: QSPI clock 370000 KHz
INFO : Watchdog enabled
SDRAM: Initializing MMR registers
SDRAM: Calibrating PHY
SEQ.C: Preparing to start memory calibration
SEQ.C: CALIBRATION PASSED
SDRAM: 1024 MiB
SDRAM: ECC Enabled
ALTERA DWMMC: 0
reading u-boot.img
reading u-boot.img


U-Boot 2014.07-rc1-00079-g2072e72-dirty (May 16 2014 - 15:54:55)

CPU   : Altera SOCFPGA Platform
BOARD : Altera SOCFPGA Cyclone5 Board
DRAM:  1 GiB
WARNING: Caches not enabled
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
SOCFPGA_CYCLONE5 # help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
echo    - echo args to console
editenv - edit environment variable
env     - environment handling commands
exit    - exit script
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fdt     - flattened device tree utility commands
go      - start application at address 'addr'
help    - print command description/usage
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loadx   - load binary file over serial line (xmodem mode)
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing address)
mw      - memory write (fill)
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
printenv- print environment variables
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
source  - run script from memory
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
version - print monitor, compiler and linker version
SOCFPGA_CYCLONE5 #


> 
> As Chin Liang See has said, there are two issues thwarting this: legal AND 
> source conformance. The code we can fix, the legal can only be fixed by 
> bending Altera - I am going to do that too.


We are making some progress on this. Once we have final green light, we
will start the upstreaming of SDRAM code. :)

Thanks

Chin Liang

> 
> Regards
> 
> Charles