From: Ash Charles <ashcharles@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [Patch v2 4/9] OMAP3: overo: eliminate hard-coded partition offsets
Date: Wed, 21 May 2014 14:04:50 -0700 [thread overview]
Message-ID: <1400706295-31871-5-git-send-email-ashcharles@gmail.com> (raw)
In-Reply-To: <1400706295-31871-1-git-send-email-ashcharles@gmail.com>
The linux kernel is at nand0,3 using the current layout, but is best
accessed through the partition label "linux". Since CONFIG_CMD_MTDPARTS is
defined the CONFIG_JFFS2 settings are unreferenced; use "setenv partition
rootfs" to set the default mtd partition for jffs2.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Tested-by: Ash Charles <ash@gumstix.com>
---
include/configs/omap3_overo.h | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 321e110..706c8cc 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -154,14 +154,6 @@
/* at CS0 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET 0x680000
-#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
- /* partition */
-
/* Environment information */
#define CONFIG_BOOTDELAY 5
@@ -207,7 +199,7 @@
"bootm ${loadaddr}\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${loadaddr} 280000 400000; " \
+ "nand read ${loadaddr} linux; " \
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
--
1.8.3.2
next prev parent reply other threads:[~2014-05-21 21:04 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-29 23:15 [U-Boot] [PATCH 0/8] omap3: overo: update board data Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 1/8] omap: overo: allow the use of a plain text env file instead boot scripts Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 2/8] OMAP3: overo: add command support for mtd and ubi Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 3/8] OMAP3: overo: increase linux partition to 8 MiB Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 4/8] OMAP3: overo: eliminate hard-coded partition offsets Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 5/8] arm: omap3: Fix omap3_overo SPL boot hangup Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 6/8] [omap3][overo] Add Board Revision for Wireless chip Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 7/8] OMAP3: overo: add some Gumstix expansion boards Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree Ash Charles
2014-05-06 18:14 ` Tom Rini
2014-05-06 23:56 ` Ash Charles
2014-05-07 12:40 ` Tom Rini
2014-05-07 17:45 ` Ash Charles
2014-05-07 17:47 ` [U-Boot] [PATCH] omap3: overo: Use common configurations for Overo Ash Charles
2014-05-20 17:34 ` [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree Stefan Herbrechtsmeier
2014-05-21 20:16 ` Ash Charles
2014-05-21 21:04 ` [U-Boot] [Patch v2 0/9] omap3: overo: update board data Ash Charles
2014-05-21 21:04 ` [U-Boot] [Patch v2 1/9] omap: overo: allow the use of a plain text env file instead boot scripts Ash Charles
2014-05-23 23:50 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 2/9] OMAP3: overo: add command support for mtd and ubi Ash Charles
2014-05-23 23:50 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 3/9] OMAP3: overo: increase linux partition to 8 MiB Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` Ash Charles [this message]
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, 4/9] OMAP3: overo: eliminate hard-coded partition offsets Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 5/9] arm: omap3: Fix omap3_overo SPL boot hangup Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 6/9] [omap3][overo] Add Board Revision for Wireless chip Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, 6/9, omap3, overo] " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 7/9] OMAP3: overo: add some Gumstix expansion boards Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 8/9] [omap3][overo] Allow overo to boot with device tree Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, 8/9, omap3, overo] " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 9/9] omap3: overo: Use common configurations for Overo Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400706295-31871-5-git-send-email-ashcharles@gmail.com \
--to=ashcharles@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox