From: Ash Charles <ashcharles@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [Patch v2 5/9] arm: omap3: Fix omap3_overo SPL boot hangup
Date: Wed, 21 May 2014 14:04:51 -0700 [thread overview]
Message-ID: <1400706295-31871-6-git-send-email-ashcharles@gmail.com> (raw)
In-Reply-To: <1400706295-31871-1-git-send-email-ashcharles@gmail.com>
Patch f33b9bd3
[arm: omap3: Enable clocks for peripherals only if they are used]
breaks SPL booting on Overo. Since some gpio inputs are
read to detect the board revision. But with this patch above, the
clocks to the GPIO subsystems are not enabled per default any more.
The GPIO banks need to be configured specifically now.
Signed-off-by: Ash Charles <ashcharles@gmail.com>
---
include/configs/omap3_overo.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 706c8cc..1e4dfcf 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -80,6 +80,12 @@
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION
+#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO Bank 2 */
+#define CONFIG_OMAP3_GPIO_3 /* GPIO64..95 is in GPIO Bank 3 */
+#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */
+#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO Bank 5 */
+#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */
+
/* commands to include */
#include <config_cmd_default.h>
--
1.8.3.2
next prev parent reply other threads:[~2014-05-21 21:04 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-29 23:15 [U-Boot] [PATCH 0/8] omap3: overo: update board data Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 1/8] omap: overo: allow the use of a plain text env file instead boot scripts Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 2/8] OMAP3: overo: add command support for mtd and ubi Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 3/8] OMAP3: overo: increase linux partition to 8 MiB Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 4/8] OMAP3: overo: eliminate hard-coded partition offsets Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 5/8] arm: omap3: Fix omap3_overo SPL boot hangup Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 6/8] [omap3][overo] Add Board Revision for Wireless chip Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 7/8] OMAP3: overo: add some Gumstix expansion boards Ash Charles
2014-04-29 23:15 ` [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree Ash Charles
2014-05-06 18:14 ` Tom Rini
2014-05-06 23:56 ` Ash Charles
2014-05-07 12:40 ` Tom Rini
2014-05-07 17:45 ` Ash Charles
2014-05-07 17:47 ` [U-Boot] [PATCH] omap3: overo: Use common configurations for Overo Ash Charles
2014-05-20 17:34 ` [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree Stefan Herbrechtsmeier
2014-05-21 20:16 ` Ash Charles
2014-05-21 21:04 ` [U-Boot] [Patch v2 0/9] omap3: overo: update board data Ash Charles
2014-05-21 21:04 ` [U-Boot] [Patch v2 1/9] omap: overo: allow the use of a plain text env file instead boot scripts Ash Charles
2014-05-23 23:50 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 2/9] OMAP3: overo: add command support for mtd and ubi Ash Charles
2014-05-23 23:50 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 3/9] OMAP3: overo: increase linux partition to 8 MiB Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 4/9] OMAP3: overo: eliminate hard-coded partition offsets Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` Ash Charles [this message]
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, 5/9] arm: omap3: Fix omap3_overo SPL boot hangup Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 6/9] [omap3][overo] Add Board Revision for Wireless chip Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, 6/9, omap3, overo] " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 7/9] OMAP3: overo: add some Gumstix expansion boards Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 8/9] [omap3][overo] Allow overo to boot with device tree Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, 8/9, omap3, overo] " Tom Rini
2014-05-21 21:04 ` [U-Boot] [Patch v2 9/9] omap3: overo: Use common configurations for Overo Ash Charles
2014-05-23 23:51 ` [U-Boot] [U-Boot, v2, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400706295-31871-6-git-send-email-ashcharles@gmail.com \
--to=ashcharles@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox