[U-Boot] Standalone application issue.

[mazen.e <mazen.ezzeddine@gmail.com>]

Dear Wolfgang,

Thank you very much.


As per your request, 

I executed the following  mkimage command:

mkimage -A arm -O u-boot -T standalone -C none -a 0x0c100000 -e 0x0c100000
-n  "Hello World" -d hello_world.bin Hello.img


Than, I transferred to the board using uboot loadb (followed by the kermit
send command) and then launched the bootm 



ARNDALE5250 # bootm 0x43E00000
## Booting kernel from Legacy Image at 43e00000 ...
   Image Name:   Hello World
   Image Type:   ARM U-Boot Standalone Program (uncompressed)
   Data Size:    594 Bytes = 594 Bytes
   Load Address: 0c100000
   Entry Point:  0c100000
   Verifying Checksum ... OK
   Loading Standalone Program ... OK
OK

Still, the program hangs at the above giving no sign of life.

Please note I am using the arndale 5250 board, am I missing something?

Can I try to write the hello world standalone into the microSD?  what are dd
parameters shall I use (e.g. seek)?

Many thanks and best regards.




--
View this message in context: http://u-boot.10912.n7.nabble.com/Standalone-application-issue-tp180515p180701.html
Sent from the U-Boot mailing list archive at Nabble.com.