From: Ian Campbell <ijc@hellion.org.uk>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/5] sunxi: add Cubieboard2 support
Date: Sat, 31 May 2014 17:36:13 +0100 [thread overview]
Message-ID: <1401554175-29599-3-git-send-email-ijc@hellion.org.uk> (raw)
In-Reply-To: <1401554145.15871.100.camel@hastur.hellion.org.uk>
This is a sun7i (A20) based followup to the sun4i (A10)
Cubieboard. It has GMAC using MII mode.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
---
board/sunxi/Makefile | 1 +
board/sunxi/dram_cubieboard2.c | 31 +++++++++++++++++++++++++++++++
boards.cfg | 2 ++
3 files changed, 34 insertions(+)
create mode 100644 board/sunxi/dram_cubieboard2.c
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 7083632..62acb8f 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -12,5 +12,6 @@ obj-y += board.o
obj-$(CONFIG_SUNXI_GMAC) += gmac.o
obj-$(CONFIG_A13_OLINUXINOM) += dram_a13_oli_micro.o
obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o
+obj-$(CONFIG_CUBIEBOARD2) += dram_cubieboard2.o
obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o
obj-$(CONFIG_R7DONGLE) += dram_r7dongle.o
diff --git a/board/sunxi/dram_cubieboard2.c b/board/sunxi/dram_cubieboard2.c
new file mode 100644
index 0000000..9e75367
--- /dev/null
+++ b/board/sunxi/dram_cubieboard2.c
@@ -0,0 +1,31 @@
+/* this file is generated, don't edit it yourself */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+ .clock = 480,
+ .type = 3,
+ .rank_num = 1,
+ .density = 4096,
+ .io_width = 16,
+ .bus_width = 32,
+ .cas = 9,
+ .zq = 0x7f,
+ .odt_en = 0,
+ .size = 1024,
+ .tpr0 = 0x42d899b7,
+ .tpr1 = 0xa090,
+ .tpr2 = 0x22a00,
+ .tpr3 = 0x0,
+ .tpr4 = 0x1,
+ .tpr5 = 0x0,
+ .emr1 = 0x4,
+ .emr2 = 0x10,
+ .emr3 = 0x0,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+ return dramc_init(&dram_para);
+}
diff --git a/boards.cfg b/boards.cfg
index 1d31e4d..c000910 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -383,6 +383,8 @@ Active arm armv7 s5pc1xx samsung smdkc100
Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - -
Active arm armv7 sunxi - sunxi A13-OLinuXinoM sun5i:A13_OLINUXINOM,SPL,CONS_INDEX=2 Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL,AXP209_POWER,SUNXI_EMAC Hans de Goede <hdegoede@redhat.com>
+Active arm armv7 sunxi - sunxi Cubieboard2 sun7i:CUBIEBOARD2,SPL,SUNXI_GMAC Hans de Goede <hdegoede@redhat.com>:Ian Campbell <ijc@hellion.org.uk>
+Active arm armv7 sunxi - sunxi Cubieboard2_FEL sun7i:CUBIEBOARD2,SPL_FEL,SUNXI_GMAC Hans de Goede <hdegoede@redhat.com>:Ian Campbell <ijc@hellion.org.uk>
Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,AXP209_POWER,SUNXI_GMAC,RGMII Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,AXP209_POWER,SUNXI_GMAC,RGMII Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi r7-tv-dongle sun5i:R7DONGLE,SPL,AXP152_POWER Hans de Goede <hdegoede@redhat.com>
--
1.9.0
next prev parent reply other threads:[~2014-05-31 16:36 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-31 16:35 [U-Boot] [PATCH 0/5] sunxi: GPIO, AHCI and Cubieboard 2 support Ian Campbell
2014-05-31 16:36 ` [U-Boot] [PATCH 1/5] AHCI: Increase link timeout to 200ms Ian Campbell
2014-07-04 14:58 ` Marek Vasut
2014-07-04 15:26 ` Ian Campbell
2014-07-04 15:44 ` Marek Vasut
2014-07-04 16:16 ` Ian Campbell
2014-05-31 16:36 ` [U-Boot] [PATCH 2/5] board_r: run scsi init() on ARM too Ian Campbell
2014-06-03 3:32 ` Simon Glass
2014-07-04 14:59 ` Marek Vasut
2014-07-04 15:25 ` Ian Campbell
2014-07-04 15:44 ` Marek Vasut
2014-05-31 16:36 ` Ian Campbell [this message]
2014-05-31 16:36 ` [U-Boot] [PATCH 4/5] sunxi: add gpio driver Ian Campbell
2014-05-31 16:36 ` [U-Boot] [PATCH 5/5] ahci: provide sunxi SATA driver using AHCI platform framework Ian Campbell
2014-06-03 19:49 ` Hans de Goede
2014-06-04 8:37 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401554175-29599-3-git-send-email-ijc@hellion.org.uk \
--to=ijc@hellion.org.uk \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox