From: Tim Harvey <tharvey@gateworks.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 04/10] imx: add comments and remove unused struct fields
Date: Mon, 2 Jun 2014 16:13:21 -0700 [thread overview]
Message-ID: <1401750807-5975-5-git-send-email-tharvey@gateworks.com> (raw)
In-Reply-To: <1401750807-5975-1-git-send-email-tharvey@gateworks.com>
Add comment block for the imx_ddr_size function and remove the extra unused
fields from struct esd_mmdc_regs which are also not common between IMX53 and
IMX6.
Cc: Stefan Roese <sr@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Andy Ng <andreas2025@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
---
v4:
- added Nikita's Ack
v3:
- fixed doxygen-style comment block
- added Stefano's Ack
v2:
- new patch in series
---
arch/arm/imx-common/cpu.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index a77c4de..5a09107 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -58,6 +58,7 @@ char *get_reset_cause(void)
static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9};
static const unsigned char bank_lookup[] = {3, 2};
+/* these MMDC registers are common to the IMX53 and IMX6 */
struct esd_mmdc_regs {
uint32_t ctl;
uint32_t pdc;
@@ -66,15 +67,6 @@ struct esd_mmdc_regs {
uint32_t cfg1;
uint32_t cfg2;
uint32_t misc;
- uint32_t scr;
- uint32_t ref;
- uint32_t rsvd1;
- uint32_t rsvd2;
- uint32_t rwd;
- uint32_t or;
- uint32_t mrr;
- uint32_t cfg3lp;
- uint32_t mr4;
};
#define ESD_MMDC_CTL_GET_ROW(mdctl) ((ctl >> 24) & 7)
@@ -83,6 +75,12 @@ struct esd_mmdc_regs {
#define ESD_MMDC_CTL_GET_CS1(mdctl) ((ctl >> 30) & 1)
#define ESD_MMDC_MISC_GET_BANK(mdmisc) ((misc >> 5) & 1)
+/*
+ * imx_ddr_size - return size in bytes of DRAM according MMDC config
+ * The MMDC MDCTL register holds the number of bits for row, col, and data
+ * width and the MMDC MDMISC register holds the number of banks. Combine
+ * all these bits to determine the meme size the MMDC has been configured for
+ */
unsigned imx_ddr_size(void)
{
struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE;
--
1.8.3.2
next prev parent reply other threads:[~2014-06-02 23:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-02 23:13 [U-Boot] [PATCH v4 00/10] mx6: SPL NAND support Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 01/10] spl: nand: add support for mxs nand Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 02/10] mx6: add common SPL configuration Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 03/10] mx6: add boot device support for SPL Tim Harvey
2014-06-02 23:13 ` Tim Harvey [this message]
2014-06-02 23:13 ` [U-Boot] [PATCH v4 05/10] mx6: add structs for mmdc and ddr iomux registers Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 06/10] mx6: add mmdc configuration for MX6Q/MX6DL Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 07/10] imx: iomux: add macros to setup iomux for multiple SoC types Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 08/10] imx: ventana: split read_eeprom into standalone file Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 09/10] imx: ventana: auto-configure for IMX6Q vs IMX6DL Tim Harvey
2014-06-02 23:13 ` [U-Boot] [PATCH v4 10/10] imx: ventana: switch to SPL Tim Harvey
2014-06-06 8:12 ` [U-Boot] [PATCH v4 00/10] mx6: SPL NAND support Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401750807-5975-5-git-send-email-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox