From: Roman Byshko <rbyshko@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 2/5] sunxi: add USB EHCI driver
Date: Sun, 27 Jul 2014 19:32:44 +0200 [thread overview]
Message-ID: <1406482364-16381-1-git-send-email-rbyshko@gmail.com> (raw)
In-Reply-To: <53D4CE5C.9050308@redhat.com>
The Allwinner aka sunxi SoCs have one or more USB host controllers.
This adds a driver for their EHCI.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
---
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-sunxi.c | 201 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 202 insertions(+)
create mode 100644 drivers/usb/host/ehci-sunxi.c
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 04c1a64..c4f5157 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
+obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
new file mode 100644
index 0000000..23617b7
--- /dev/null
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2014 Roman Byshko
+ *
+ * Roman Byshko <rbyshko@gmail.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include "ehci.h"
+
+#define SUNXI_USB1_IO_BASE 0x01c14000
+#define SUNXI_USB2_IO_BASE 0x01c1c000
+
+#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
+#define SUNXI_USB_CSR 0x01c13404
+#define SUNXI_USB_PASSBY_EN 1
+
+#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
+#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
+#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
+#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
+
+static struct sunxi_ehci_hcd {
+ struct usb_hcd *hcd;
+ int usb_rst_mask;
+ int ahb_clk_mask;
+ int gpio_vbus;
+ void *csr;
+ int irq;
+ int id;
+} sunxi_echi_hcd[] = {
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY1_RST,
+ .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0,
+ .gpio_vbus = CONFIG_SUNXI_USB_VBUS0_GPIO,
+ .csr = (void *)SUNXI_USB_CSR,
+ .irq = 39,
+ .id = 1,
+ },
+#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY2_RST,
+ .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1,
+ .gpio_vbus = CONFIG_SUNXI_USB_VBUS1_GPIO,
+ .csr = (void *)SUNXI_USB_CSR,
+ .irq = 40,
+ .id = 2,
+ }
+#endif
+};
+
+static int enabled_hcd_count;
+
+static void *get_io_base(int hcd_id)
+{
+ if (hcd_id == 1)
+ return (void *)SUNXI_USB1_IO_BASE;
+ else if (hcd_id == 2)
+ return (void *)SUNXI_USB2_IO_BASE;
+ else
+ return NULL;
+}
+
+static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr,
+ int data, int len)
+{
+ int j = 0, usbc_bit = 0;
+ void *dest = sunxi_ehci->csr;
+
+ usbc_bit = 1 << (sunxi_ehci->id * 2);
+ for (j = 0; j < len; j++) {
+ /* set the bit address to be written */
+ clrbits_le32(dest, 0xff << 8);
+ setbits_le32(dest, (addr + j) << 8);
+
+ clrbits_le32(dest, usbc_bit);
+ /* set data bit */
+ if (data & 0x1)
+ setbits_le32(dest, 1 << 7);
+ else
+ clrbits_le32(dest, 1 << 7);
+
+ setbits_le32(dest, usbc_bit);
+
+ clrbits_le32(dest, usbc_bit);
+
+ data >>= 1;
+ }
+}
+
+static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci)
+{
+ /* The following comments are machine
+ * translated from Chinese, you have been warned!
+ */
+
+ /* adjust PHY's magnitude and rate */
+ usb_phy_write(sunxi_ehci, 0x20, 0x14, 5);
+
+ /* threshold adjustment disconnect */
+#ifdef CONFIG_SUN4I
+ usb_phy_write(sunxi_ehci, 0x2a, 3, 2);
+#else
+ usb_phy_write(sunxi_ehci, 0x2a, 2, 2);
+#endif
+
+ return;
+}
+
+static void sunxi_usb_passby(struct sunxi_ehci_hcd *sunxi_ehci, int enable)
+{
+ unsigned long bits = 0;
+ void *addr = get_io_base(sunxi_ehci->id) + SUNXI_USB_PMU_IRQ_ENABLE;
+
+ bits = SUNXI_EHCI_AHB_ICHR8_EN |
+ SUNXI_EHCI_AHB_INCR4_BURST_EN |
+ SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
+ SUNXI_EHCI_ULPI_BYPASS_EN;
+
+ if (enable)
+ setbits_le32(addr, bits);
+ else
+ clrbits_le32(addr, bits);
+
+ return;
+}
+
+static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci)
+{
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ setbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
+ setbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
+
+ sunxi_usb_phy_init(sunxi_ehci);
+
+ sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN);
+
+ gpio_direction_output(sunxi_ehci->gpio_vbus, 1);
+}
+
+static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci)
+{
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ gpio_direction_output(sunxi_ehci->gpio_vbus, 0);
+
+ sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN);
+
+ clrbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask);
+ clrbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask);
+}
+
+int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
+ struct ehci_hcor **hcor)
+{
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+
+ /* enable common PHY only once */
+ if (index == 0)
+ setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+ sunxi_ehci_enable(sunxi_ehci);
+
+ *hccr = get_io_base(sunxi_ehci->id);
+
+ *hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+ debug("sunxi-ehci: init hccr %x and hcor %x hc_length %d\n",
+ (uint32_t)*hccr, (uint32_t)*hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+ enabled_hcd_count++;
+
+ return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+
+ sunxi_ehci_disable(sunxi_ehci);
+
+ /* disable common PHY only once, for the last enabled hcd */
+ if (enabled_hcd_count == 1)
+ clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+ enabled_hcd_count--;
+
+ return 0;
+}
--
2.0.0
next prev parent reply other threads:[~2014-07-27 17:32 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-24 20:54 [U-Boot] [PATCH v3 0/5] ARM: Allwinner sunxi USB Host EHCI support Roman Byshko
2014-07-24 20:54 ` [U-Boot] [PATCH v3 1/5] sunxi: add defines to control USB Host clocks/resets Roman Byshko
2014-07-24 20:54 ` [U-Boot] [PATCH v3 2/5] sunxi: add USB EHCI driver Roman Byshko
2014-07-25 15:01 ` Marek Vasut
2014-07-25 15:38 ` Ian Campbell
2014-07-25 15:41 ` Marek Vasut
2014-07-25 16:06 ` Ian Campbell
2014-07-25 16:31 ` Marek Vasut
2014-07-25 16:36 ` Ian Campbell
2014-07-26 16:25 ` Hans de Goede
2014-07-26 22:22 ` Hans de Goede
2014-07-27 0:55 ` Marek Vasut
2014-07-27 8:29 ` Ian Campbell
2014-07-27 10:03 ` Hans de Goede
2014-07-27 15:35 ` Marek Vasut
2014-07-27 17:32 ` Roman Byshko [this message]
2014-07-27 17:57 ` [U-Boot] [PATCH v4 " Marek Vasut
2014-07-27 20:14 ` Hans de Goede
2014-07-27 20:41 ` Marek Vasut
2014-07-24 20:54 ` [U-Boot] [PATCH v3 3/5] sunxi: add general USB settings Roman Byshko
2014-07-24 20:54 ` [U-Boot] [PATCH v3 4/5] sun7i: add USB EHCI settings Roman Byshko
2014-07-24 20:54 ` [U-Boot] [PATCH v3 5/5] sun7i: cubietruck: enable USB EHCI Roman Byshko
2014-07-25 20:33 ` Ian Campbell
2014-07-26 22:34 ` Hans de Goede
2014-07-25 9:31 ` [U-Boot] [PATCH v3 0/5] ARM: Allwinner sunxi USB Host EHCI support Roman B.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406482364-16381-1-git-send-email-rbyshko@gmail.com \
--to=rbyshko@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox