public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [UBOOT RFC PATCH 03/13] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY
Date: Mon, 18 Aug 2014 19:58:25 +0530	[thread overview]
Message-ID: <1408372115-4570-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1408372115-4570-1-git-send-email-kishon@ti.com>

Enabled clocks for dwc3 controller and USB PHY present in DRA7.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/cpu/armv7/omap5/hw_data.c   | 14 ++++++++++++++
 arch/arm/cpu/armv7/omap5/prcm-regs.c |  6 ++++--
 arch/arm/include/asm/omap_common.h   |  4 ++--
 3 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 4baca11..c7d5343 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -434,6 +434,10 @@ void enable_basic_clocks(void)
 		(*prcm)->cm_l4per_gpio6_clkctrl,
 		(*prcm)->cm_l4per_gpio7_clkctrl,
 		(*prcm)->cm_l4per_gpio8_clkctrl,
+#ifdef CONFIG_USB_DWC3
+		(*prcm)->cm_l3init_ocp2scp1_clkctrl,
+		(*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+#endif
 		0
 	};
 
@@ -465,6 +469,16 @@ void enable_basic_clocks(void)
 	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
 			HSMMC_CLKCTRL_CLKSEL_MASK);
 
+#ifdef CONFIG_USB_DWC3
+	/* Enable 960 MHz clock for dwc3 */
+	setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+			OPTFCLKEN_REFCLK960M);
+
+	/* Enable 32 KHz clock for dwc3 */
+	setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
+			USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+#endif
+
 	/* Set the correct clock dividers for mmc */
 	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
 			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index ff08ef4..74d99de 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -574,7 +574,7 @@ struct prcm_regs const omap5_es2_prcm = {
 	.cm_div_m2_dpll_unipro = 0x4a0081d0,
 	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
 	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
-	.cm_coreaon_usb_phy_core_clkctrl = 0x4A008640,
+	.cm_coreaon_usb_phy1_core_clkctrl = 0x4A008640,
 	.cm_coreaon_bandgap_clkctrl = 0x4a008648,
 	.cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
 
@@ -708,7 +708,7 @@ struct prcm_regs const omap5_es2_prcm = {
 	.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
 	.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
 	.cm_l3init_ocp2scp3_clkctrl = 0x4a0096e8,
-	.cm_l3init_usb_otg_ss_clkctrl = 0x4a0096f0,
+	.cm_l3init_usb_otg_ss1_clkctrl = 0x4a0096f0,
 
 	/* prm irqstatus regs */
 	.prm_irqstatus_mpu_2 = 0x4ae06014,
@@ -800,6 +800,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_clkmode_dpll_dsp			= 0x4a005234,
 	.cm_shadow_freq_config1			= 0x4a005260,
 	.cm_clkmode_dpll_gmac			= 0x4a0052a8,
+	.cm_coreaon_usb_phy1_core_clkctrl	= 0x4a008640,
 	.cm_coreaon_usb_phy2_core_clkctrl = 0x4a008688,
 
 	/* cm1.mpu */
@@ -906,6 +907,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_gmac_gmac_clkctrl			= 0x4a0093d0,
 	.cm_l3init_ocp2scp1_clkctrl		= 0x4a0093e0,
 	.cm_l3init_ocp2scp3_clkctrl		= 0x4a0093e8,
+	.cm_l3init_usb_otg_ss1_clkctrl		= 0x4a0093f0,
 
 	/* cm2.l4per */
 	.cm_l4per_clkstctrl			= 0x4a009700,
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index d1344ee..f010af3 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -143,7 +143,7 @@ struct prcm_regs {
 	u32 cm_div_m2_dpll_unipro;
 	u32 cm_ssc_deltamstep_dpll_unipro;
 	u32 cm_ssc_modfreqdiv_dpll_unipro;
-	u32 cm_coreaon_usb_phy_core_clkctrl;
+	u32 cm_coreaon_usb_phy1_core_clkctrl;
 	u32 cm_coreaon_usb_phy2_core_clkctrl;
 
 	/* cm2.core */
@@ -230,7 +230,7 @@ struct prcm_regs {
 	u32 cm_l3init_fsusb_clkctrl;
 	u32 cm_l3init_ocp2scp1_clkctrl;
 	u32 cm_l3init_ocp2scp3_clkctrl;
-	u32 cm_l3init_usb_otg_ss_clkctrl;
+	u32 cm_l3init_usb_otg_ss1_clkctrl;
 
 	u32 prm_irqstatus_mpu_2;
 
-- 
1.9.1

  parent reply	other threads:[~2014-08-18 14:28 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-18 14:28 [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 01/13] include: linux: preparation for porting dwc3 from linux kernel Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core " Kishon Vijay Abraham I
2014-08-18 14:36   ` Felipe Balbi
2014-08-19 14:58     ` Kishon Vijay Abraham I
2014-08-19  8:52   ` Lukasz Majewski
2014-08-19 15:11     ` Felipe Balbi
2014-08-19 15:18     ` Kishon Vijay Abraham I
2014-08-19 15:28       ` Felipe Balbi
2014-08-19 15:38         ` Lukasz Majewski
2014-08-19 16:06         ` Kishon Vijay Abraham I
2014-08-20  7:02           ` Lukasz Majewski
2014-08-18 14:28 ` Kishon Vijay Abraham I [this message]
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 04/13] usb: dwc3: Add dwc3 driver Kishon Vijay Abraham I
2014-08-18 14:37   ` Felipe Balbi
2014-08-19 15:19     ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 05/13] usb: dwc3-omap: Add dwc3 glue driver for OMAP Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 06/13] usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor Kishon Vijay Abraham I
2014-08-18 14:38   ` Felipe Balbi
2014-08-18 14:49     ` Lukasz Majewski
2014-08-18 14:56     ` Lukasz Majewski
2014-08-19 15:38       ` Kishon Vijay Abraham I
2014-08-19 15:44         ` Felipe Balbi
2014-08-20  7:34           ` Lukasz Majewski
2014-08-20 16:11             ` Felipe Balbi
2014-08-21  8:00               ` Lukasz Majewski
2014-08-21 13:50                 ` Felipe Balbi
2014-08-20  7:23         ` Lukasz Majewski
2014-08-19 15:34     ` Kishon Vijay Abraham I
2014-08-19 15:39       ` Felipe Balbi
2014-08-19 15:42         ` Kishon Vijay Abraham I
2014-08-19 15:48           ` Felipe Balbi
2014-08-19 15:53             ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 08/13] common: cmd_dfu: invoke board_usb_cleanup() for cleaning up Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 09/13] common: cmd_dfu: add an API that takes controller index for handling interrupts Kishon Vijay Abraham I
2014-08-19  8:53   ` Lukasz Majewski
2014-08-19 16:09     ` Kishon Vijay Abraham I
2014-08-20  7:37       ` Lukasz Majewski
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code Kishon Vijay Abraham I
2014-08-18 14:40   ` Felipe Balbi
2014-08-19 16:13     ` Kishon Vijay Abraham I
2014-08-19 16:26       ` Felipe Balbi
2014-08-22 10:47         ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 11/13] commom: usb: implement "__weak" functions to make compiler happy Kishon Vijay Abraham I
2014-08-19  8:28   ` Lukasz Majewski
2014-08-19 16:14     ` Kishon Vijay Abraham I
2014-08-21 17:32       ` Tom Rini
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 12/13] include: configs: Enable DWC3 and DFU in DRA7xx Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096 Kishon Vijay Abraham I
2014-08-18 14:41   ` Felipe Balbi
2014-08-19 16:15     ` Kishon Vijay Abraham I
2014-08-19 16:27       ` Felipe Balbi
2014-08-22 11:02         ` Kishon Vijay Abraham I
2014-08-22 13:54           ` Felipe Balbi
2014-08-18 15:29 ` [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU Tom Rini
2014-08-19  8:56 ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1408372115-4570-4-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox