From: Steve Rae <srae@broadcom.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC
Date: Sat, 23 Aug 2014 12:53:01 -0700 [thread overview]
Message-ID: <1408823626-12744-1-git-send-email-srae@broadcom.com> (raw)
This series implements the "fastboot flash" command for eMMC devices.
It supports both raw and sparse images.
NOTES:
- the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???)
This has been tested on ARMv7.
----
This series depends on:
http://patchwork.ozlabs.org/patch/379438/
http://patchwork.ozlabs.org/patch/382443/ (to 382446)
Changes in v5:
- use the common/aboot.c for the "sparse format" handling
Changes in v4:
- rearranged this patchset so that "sparse_format.h" can be dropped (if we cannot
resolve the copyright/licensing issues)
- update mmc_get_dev(...) to get_dev("mmc",....)
- update printf() to puts() where applicable
- update debug string as per feedback
- rearranged "sparse format" support in this patchset, in order to isolate...
Changes in v3:
- remove most references to 'mmc',
which leaves only one mmc specific function: mmc_get_dev()
Changes in v2:
- split large function into three
- improved handling of response messages
- additional partition size checking when writing sparse image
- update README.android-fastboot file
- new in v2
Steve Rae (4):
usb/gadget: fastboot: add eMMC support for flash command
usb/gadget: fastboot: add support for flash command
usb/gadget: fastboot: minor cleanup
usb/gadget: fastboot: implement sparse format
README | 10 +++++
common/Makefile | 6 +++
common/cmd_fastboot.c | 7 +--
common/fb_mmc.c | 95 +++++++++++++++++++++++++++++++++++++++++
doc/README.android-fastboot | 5 ++-
drivers/usb/gadget/f_fastboot.c | 44 +++++++++++++++++--
include/fb_mmc.h | 8 ++++
7 files changed, 166 insertions(+), 9 deletions(-)
create mode 100644 common/fb_mmc.c
create mode 100644 include/fb_mmc.h
--
1.8.5
next reply other threads:[~2014-08-23 19:53 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-23 19:53 Steve Rae [this message]
2014-08-23 19:53 ` [U-Boot] [PATCH v5 1/4] usb/gadget: fastboot: add eMMC support for flash command Steve Rae
2014-08-26 9:28 ` Lukasz Majewski
2014-08-26 9:41 ` Marek Vasut
2014-08-26 18:54 ` Steve Rae
2014-08-23 19:53 ` [U-Boot] [PATCH v5 2/4] usb/gadget: fastboot: add " Steve Rae
2014-08-26 11:53 ` Lukasz Majewski
2014-08-23 19:53 ` [U-Boot] [PATCH v5 3/4] usb/gadget: fastboot: minor cleanup Steve Rae
2014-08-26 11:55 ` Lukasz Majewski
2014-08-23 19:53 ` [U-Boot] [PATCH v5 4/4] usb/gadget: fastboot: implement sparse format Steve Rae
2014-08-26 11:58 ` Lukasz Majewski
2014-08-23 20:12 ` [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC Marek Vasut
2014-08-25 7:19 ` Lukasz Majewski
2014-08-25 7:52 ` Marek Vasut
2014-08-25 14:57 ` Lukasz Majewski
2014-08-25 17:10 ` Steve Rae
2014-08-26 9:14 ` Lukasz Majewski
2014-08-26 16:27 ` Steve Rae
2014-08-27 7:04 ` Lukasz Majewski
2014-08-28 13:24 ` Tom Rini
2014-08-28 17:06 ` Steve Rae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408823626-12744-1-git-send-email-srae@broadcom.com \
--to=srae@broadcom.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox