From: Steve Rae <srae@broadcom.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 1/4] usb/gadget: fastboot: add eMMC support for flash command
Date: Sat, 23 Aug 2014 12:53:02 -0700 [thread overview]
Message-ID: <1408823626-12744-2-git-send-email-srae@broadcom.com> (raw)
In-Reply-To: <1408823626-12744-1-git-send-email-srae@broadcom.com>
- add support for 'fastboot flash' command for eMMC devices
Signed-off-by: Steve Rae <srae@broadcom.com>
---
Changes in v5: None
Changes in v4:
- rearranged this patchset so that "sparse_format.h" can be dropped (if we cannot
resolve the copyright/licensing issues)
- update mmc_get_dev(...) to get_dev("mmc",....)
- update printf() to puts() where applicable
Changes in v3:
- remove most references to 'mmc',
which leaves only one mmc specific function: mmc_get_dev()
Changes in v2:
- split large function into three
- improved handling of response messages
- additional partition size checking when writing sparse image
common/Makefile | 5 ++++
common/fb_mmc.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/fb_mmc.h | 8 ++++++
3 files changed, 95 insertions(+)
create mode 100644 common/fb_mmc.c
create mode 100644 include/fb_mmc.h
diff --git a/common/Makefile b/common/Makefile
index de5cce8..daebe39 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -266,4 +266,9 @@ obj-$(CONFIG_IO_TRACE) += iotrace.o
obj-y += memsize.o
obj-y += stdio.o
+# This option is not just y/n - it can have a numeric value
+ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
+obj-y += fb_mmc.o
+endif
+
CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/common/fb_mmc.c b/common/fb_mmc.c
new file mode 100644
index 0000000..e559e2a
--- /dev/null
+++ b/common/fb_mmc.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fb_mmc.h>
+#include <part.h>
+
+/* The 64 defined bytes plus the '\0' */
+#define RESPONSE_LEN (64 + 1)
+
+static char *response_str;
+
+static void fastboot_resp(const char *s)
+{
+ strncpy(response_str, s, RESPONSE_LEN);
+ response_str[RESPONSE_LEN - 1] = '\0';
+}
+
+static void write_raw_image(block_dev_desc_t *dev_desc, disk_partition_t *info,
+ const char *part_name, void *buffer,
+ unsigned int download_bytes)
+{
+ lbaint_t blkcnt;
+ lbaint_t blks;
+
+ /* determine number of blocks to write */
+ blkcnt = ((download_bytes + (info->blksz - 1)) & ~(info->blksz - 1));
+ blkcnt = blkcnt / info->blksz;
+
+ if (blkcnt > info->size) {
+ printf("%s: too large for partition: '%s'\n", __func__,
+ part_name);
+ fastboot_resp("FAILtoo large for partition");
+ return;
+ }
+
+ puts("Flashing Raw Image\n");
+
+ blks = dev_desc->block_write(dev_desc->dev, info->start, blkcnt,
+ buffer);
+ if (blks != blkcnt) {
+ printf("%s: failed writing to device %d\n", __func__,
+ dev_desc->dev);
+ fastboot_resp("FAILfailed writing to device");
+ return;
+ }
+
+ printf("........ wrote " LBAFU " bytes to '%s'\n", blkcnt * info->blksz,
+ part_name);
+ fastboot_resp("OKAY");
+}
+
+void fb_mmc_flash_write(const char *cmd, void *download_buffer,
+ unsigned int download_bytes, char *response)
+{
+ int ret;
+ block_dev_desc_t *dev_desc;
+ disk_partition_t info;
+
+ /* initialize the response buffer */
+ response_str = response;
+
+ dev_desc = get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
+ if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
+ printf("%s: invalid mmc device\n", __func__);
+ fastboot_resp("FAILinvalid mmc device");
+ return;
+ }
+
+ ret = get_partition_info_efi_by_name(dev_desc, cmd, &info);
+ if (ret) {
+ printf("%s: cannot find partition: '%s'\n", __func__, cmd);
+ fastboot_resp("FAILcannot find partition");
+ return;
+ }
+
+ write_raw_image(dev_desc, &info, cmd, download_buffer,
+ download_bytes);
+}
diff --git a/include/fb_mmc.h b/include/fb_mmc.h
new file mode 100644
index 0000000..1ad1d13
--- /dev/null
+++ b/include/fb_mmc.h
@@ -0,0 +1,8 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+void fb_mmc_flash_write(const char *cmd, void *download_buffer,
+ unsigned int download_bytes, char *response);
--
1.8.5
next prev parent reply other threads:[~2014-08-23 19:53 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-23 19:53 [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC Steve Rae
2014-08-23 19:53 ` Steve Rae [this message]
2014-08-26 9:28 ` [U-Boot] [PATCH v5 1/4] usb/gadget: fastboot: add eMMC support for flash command Lukasz Majewski
2014-08-26 9:41 ` Marek Vasut
2014-08-26 18:54 ` Steve Rae
2014-08-23 19:53 ` [U-Boot] [PATCH v5 2/4] usb/gadget: fastboot: add " Steve Rae
2014-08-26 11:53 ` Lukasz Majewski
2014-08-23 19:53 ` [U-Boot] [PATCH v5 3/4] usb/gadget: fastboot: minor cleanup Steve Rae
2014-08-26 11:55 ` Lukasz Majewski
2014-08-23 19:53 ` [U-Boot] [PATCH v5 4/4] usb/gadget: fastboot: implement sparse format Steve Rae
2014-08-26 11:58 ` Lukasz Majewski
2014-08-23 20:12 ` [U-Boot] [PATCH v5 0/4] Implement "fastboot flash" for eMMC Marek Vasut
2014-08-25 7:19 ` Lukasz Majewski
2014-08-25 7:52 ` Marek Vasut
2014-08-25 14:57 ` Lukasz Majewski
2014-08-25 17:10 ` Steve Rae
2014-08-26 9:14 ` Lukasz Majewski
2014-08-26 16:27 ` Steve Rae
2014-08-27 7:04 ` Lukasz Majewski
2014-08-28 13:24 ` Tom Rini
2014-08-28 17:06 ` Steve Rae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408823626-12744-2-git-send-email-srae@broadcom.com \
--to=srae@broadcom.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox