From: Steve Rae <srae@broadcom.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/4] cleanup code which handles the Android sparse image format
Date: Thu, 28 Aug 2014 10:53:53 -0700 [thread overview]
Message-ID: <1409248434-25762-4-git-send-email-srae@broadcom.com> (raw)
In-Reply-To: <1409248434-25762-1-git-send-email-srae@broadcom.com>
- update license format
- port dprintf() to debug()
- update formatting
Signed-off-by: Steve Rae <srae@broadcom.com>
---
Changes in v2:
- use BSD-3-Clause
common/aboot.c | 120 ++++++++++++++++++++++++++-------------------------------
1 file changed, 55 insertions(+), 65 deletions(-)
diff --git a/common/aboot.c b/common/aboot.c
index a302c92..351199e 100644
--- a/common/aboot.c
+++ b/common/aboot.c
@@ -3,31 +3,9 @@
* All rights reserved.
*
* Copyright (c) 2009-2014, The Linux Foundation. All rights reserved.
+ * Portions Copyright 2014 Broadcom Corporation.
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of The Linux Foundation nor
- * the names of its contributors may be used to endorse or promote
- * products derived from this software without specific prior written
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
+ * SPDX-License-Identifier: BSD-3-Clause
*/
void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
@@ -70,23 +48,24 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
}
data += sparse_header->file_hdr_sz;
- if(sparse_header->file_hdr_sz > sizeof(sparse_header_t))
+ if (sparse_header->file_hdr_sz > sizeof(sparse_header_t))
{
- /* Skip the remaining bytes in a header that is longer than
+ /*
+ * Skip the remaining bytes in a header that is longer than
* we expected.
*/
data += (sparse_header->file_hdr_sz - sizeof(sparse_header_t));
}
- dprintf (SPEW, "=== Sparse Image Header ===\n");
- dprintf (SPEW, "magic: 0x%x\n", sparse_header->magic);
- dprintf (SPEW, "major_version: 0x%x\n", sparse_header->major_version);
- dprintf (SPEW, "minor_version: 0x%x\n", sparse_header->minor_version);
- dprintf (SPEW, "file_hdr_sz: %d\n", sparse_header->file_hdr_sz);
- dprintf (SPEW, "chunk_hdr_sz: %d\n", sparse_header->chunk_hdr_sz);
- dprintf (SPEW, "blk_sz: %d\n", sparse_header->blk_sz);
- dprintf (SPEW, "total_blks: %d\n", sparse_header->total_blks);
- dprintf (SPEW, "total_chunks: %d\n", sparse_header->total_chunks);
+ debug("=== Sparse Image Header ===\n");
+ debug("magic: 0x%x\n", sparse_header->magic);
+ debug("major_version: 0x%x\n", sparse_header->major_version);
+ debug("minor_version: 0x%x\n", sparse_header->minor_version);
+ debug("file_hdr_sz: %d\n", sparse_header->file_hdr_sz);
+ debug("chunk_hdr_sz: %d\n", sparse_header->chunk_hdr_sz);
+ debug("blk_sz: %d\n", sparse_header->blk_sz);
+ debug("total_blks: %d\n", sparse_header->total_blks);
+ debug("total_chunks: %d\n", sparse_header->total_chunks);
/* Start processing chunks */
for (chunk=0; chunk<sparse_header->total_chunks; chunk++)
@@ -95,33 +74,37 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
chunk_header = (chunk_header_t *) data;
data += sizeof(chunk_header_t);
- dprintf (SPEW, "=== Chunk Header ===\n");
- dprintf (SPEW, "chunk_type: 0x%x\n", chunk_header->chunk_type);
- dprintf (SPEW, "chunk_data_sz: 0x%x\n", chunk_header->chunk_sz);
- dprintf (SPEW, "total_size: 0x%x\n", chunk_header->total_sz);
+ debug("=== Chunk Header ===\n");
+ debug("chunk_type: 0x%x\n", chunk_header->chunk_type);
+ debug("chunk_data_sz: 0x%x\n", chunk_header->chunk_sz);
+ debug("total_size: 0x%x\n", chunk_header->total_sz);
- if(sparse_header->chunk_hdr_sz > sizeof(chunk_header_t))
+ if (sparse_header->chunk_hdr_sz > sizeof(chunk_header_t))
{
- /* Skip the remaining bytes in a header that is longer than
- * we expected.
+ /*
+ * Skip the remaining bytes in a header that is longer
+ * than we expected.
*/
- data += (sparse_header->chunk_hdr_sz - sizeof(chunk_header_t));
+ data += (sparse_header->chunk_hdr_sz -
+ sizeof(chunk_header_t));
}
chunk_data_sz = sparse_header->blk_sz * chunk_header->chunk_sz;
switch (chunk_header->chunk_type)
{
case CHUNK_TYPE_RAW:
- if(chunk_header->total_sz != (sparse_header->chunk_hdr_sz +
- chunk_data_sz))
+ if (chunk_header->total_sz !=
+ (sparse_header->chunk_hdr_sz + chunk_data_sz))
{
- fastboot_fail("Bogus chunk size for chunk type Raw");
+ fastboot_fail(
+ "Bogus chunk size for chunk type Raw");
return;
}
- if(mmc_write(ptn + ((uint64_t)total_blocks*sparse_header->blk_sz),
- chunk_data_sz,
- (unsigned int*)data))
+ if (mmc_write(ptn +
+ ((uint64_t)total_blocks *
+ sparse_header->blk_sz),
+ chunk_data_sz, (unsigned int *)data))
{
fastboot_fail("flash write failure");
return;
@@ -131,17 +114,22 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
break;
case CHUNK_TYPE_FILL:
- if(chunk_header->total_sz != (sparse_header->chunk_hdr_sz +
- sizeof(uint32_t)))
+ if (chunk_header->total_sz !=
+ (sparse_header->chunk_hdr_sz + sizeof(uint32_t)))
{
- fastboot_fail("Bogus chunk size for chunk type FILL");
+ fastboot_fail(
+ "Bogus chunk size for chunk type FILL");
return;
}
- fill_buf = (uint32_t *)memalign(CACHE_LINE, ROUNDUP(sparse_header->blk_sz, CACHE_LINE));
+ fill_buf = (uint32_t *)
+ memalign(CACHE_LINE,
+ ROUNDUP(sparse_header->blk_sz,
+ CACHE_LINE));
if (!fill_buf)
{
- fastboot_fail("Malloc failed for: CHUNK_TYPE_FILL");
+ fastboot_fail(
+ "Malloc failed for: CHUNK_TYPE_FILL");
return;
}
@@ -156,9 +144,10 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
for (i = 0; i < chunk_blk_cnt; i++)
{
- if(mmc_write(ptn + ((uint64_t)total_blocks*sparse_header->blk_sz),
- sparse_header->blk_sz,
- fill_buf))
+ if (mmc_write(ptn +
+ ((uint64_t)total_blocks *
+ sparse_header->blk_sz),
+ sparse_header->blk_sz, fill_buf))
{
fastboot_fail("flash write failure");
free(fill_buf);
@@ -176,9 +165,11 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
break;
case CHUNK_TYPE_CRC:
- if(chunk_header->total_sz != sparse_header->chunk_hdr_sz)
+ if (chunk_header->total_sz !=
+ sparse_header->chunk_hdr_sz)
{
- fastboot_fail("Bogus chunk size for chunk type Dont Care");
+ fastboot_fail(
+ "Bogus chunk size for chunk type Dont Care");
return;
}
total_blocks += chunk_header->chunk_sz;
@@ -186,19 +177,18 @@ void cmd_flash_mmc_sparse_img(const char *arg, void *data, unsigned sz)
break;
default:
- dprintf(CRITICAL, "Unkown chunk type: %x\n",chunk_header->chunk_type);
+ debug("Unkown chunk type: %x\n",
+ chunk_header->chunk_type);
fastboot_fail("Unknown chunk type");
return;
}
}
- dprintf(INFO, "Wrote %d blocks, expected to write %d blocks\n",
- total_blocks, sparse_header->total_blks);
+ debug("Wrote %d blocks, expected to write %d blocks\n",
+ total_blocks, sparse_header->total_blks);
- if(total_blocks != sparse_header->total_blks)
- {
+ if (total_blocks != sparse_header->total_blks)
fastboot_fail("sparse image write failure");
- }
fastboot_okay("");
return;
--
1.8.5
next prev parent reply other threads:[~2014-08-28 17:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-28 17:53 [U-Boot] [PATCH v2 0/4] Implement "sparse format" for fastboot Steve Rae
2014-08-28 17:53 ` [U-Boot] [PATCH v2 1/4] add code to handle Android sparse image format Steve Rae
2014-08-28 21:16 ` Tom Rini
2014-08-28 21:31 ` Steve Rae
2014-08-28 21:52 ` Steve Rae
2014-08-29 8:20 ` Marek Vasut
2014-08-29 15:11 ` Tom Rini
2014-08-29 17:38 ` Steve Rae
2014-08-29 20:54 ` Marek Vasut
2014-08-29 23:13 ` Steve Rae
2014-09-03 0:03 ` Steve Rae
2014-09-03 0:33 ` Tom Rini
2014-08-28 17:53 ` [U-Boot] [PATCH v2 2/4] update code which handles " Steve Rae
2014-08-28 17:53 ` Steve Rae [this message]
2014-08-28 19:43 ` [U-Boot] [PATCH v2 3/4] cleanup code which handles the " Tom Rini
2014-08-28 20:33 ` Steve Rae
2014-08-28 17:53 ` [U-Boot] [PATCH v2 4/4] implement " Steve Rae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409248434-25762-4-git-send-email-srae@broadcom.com \
--to=srae@broadcom.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox