[U-Boot] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i

[U-Boot] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i

[Chen-Yu Tsai]

Hi,

This series fixes support for the reset command on sun6i/sun8i.
The watchdog hardware has changed in sun6i, both the register
addresses and definitions. This makes the reset command unusable
on sun6i.

Patch 1 moves the watchdog register definitions into a separate
file. The rationale behind this is that on sun6i, the watchdog
is effectively a separate piece of hardware and not part of the
timer.

Patch 2 fixes the register definitions for sun6i, most importantly
the watchdog offsets.

Patch 3 adds the sun6i version of reset via watchdog timeout.


I intended to submit this series after the basic sun8i series.
It just so happens that I forgot to leave my A23 tablet on at the
office, hence I won't be able to test that series until next week.

Since this series has no dependencies nor conflicts, I decided to
send this one first.


Cheers
ChenYu


Chen-Yu Tsai (3):
  ARM: sunxi: Move watchdog register definitions to separate file
  ARM: sunxi: Add sun6i/sun8i timer block register definition
  ARM: sunxi: Fix reset command on sun6i/sun8i

 arch/arm/cpu/armv7/sunxi/board.c           | 15 ++++++++++
 arch/arm/include/asm/arch-sunxi/timer.h    | 23 ++++++----------
 arch/arm/include/asm/arch-sunxi/watchdog.h | 44 ++++++++++++++++++++++++++++++
 3 files changed, 68 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-sunxi/watchdog.h

-- 
2.1.1

[U-Boot] [PATCH 1/3] ARM: sunxi: Move watchdog register definitions to separate file

[Chen-Yu Tsai]

On later Allwinner SoCs, the watchdog hardware is by all means a
separate hardware block, with its own address range and interrupt
line.

Move the register definitions to a separate file to facilitate
supporting newer SoCs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/include/asm/arch-sunxi/timer.h    | 17 +++--------------
 arch/arm/include/asm/arch-sunxi/watchdog.h | 24 ++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-sunxi/watchdog.h

diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h
index 58e14fd..8ed383e 100644
--- a/arch/arm/include/asm/arch-sunxi/timer.h
+++ b/arch/arm/include/asm/arch-sunxi/timer.h
@@ -11,14 +11,10 @@
 #ifndef _SUNXI_TIMER_H_
 #define _SUNXI_TIMER_H_
 
-#define WDT_CTRL_RESTART	(0x1 << 0)
-#define WDT_CTRL_KEY		(0x0a57 << 1)
-#define WDT_MODE_EN		(0x1 << 0)
-#define WDT_MODE_RESET_EN	(0x1 << 1)
-
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <asm/arch/watchdog.h>
 
 /* General purpose timer */
 struct sunxi_timer {
@@ -43,12 +39,6 @@ struct sunxi_64cnt {
 	u32 hi;			/* 0xa8 */
 };
 
-/* Watchdog */
-struct sunxi_wdog {
-	u32 ctl;		/* 0x90 */
-	u32 mode;		/* 0x94 */
-};
-
 /* Rtc */
 struct sunxi_rtc {
 	u32 ctl;		/* 0x100 */
@@ -77,9 +67,8 @@ struct sunxi_timer_reg {
 	struct sunxi_timer timer[6];	/* We have 6 timers */
 	u8 res2[16];
 	struct sunxi_avs avs;
-	struct sunxi_wdog wdog;
-	u8 res3[8];
-	struct sunxi_64cnt cnt64;
+	struct sunxi_wdog wdog;	/* 0x90 */
+	struct sunxi_64cnt cnt64;	/* 0xa0 */
 	u8 res4[0x58];
 	struct sunxi_rtc rtc;
 	struct sunxi_alarm alarm;
diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h
new file mode 100644
index 0000000..5b755e3
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/watchdog.h
@@ -0,0 +1,24 @@
+/*
+ * (C) Copyright 2014
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * Watchdog register definitions
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SUNXI_WATCHDOG_H_
+#define _SUNXI_WATCHDOG_H_
+
+#define WDT_CTRL_RESTART	(0x1 << 0)
+#define WDT_CTRL_KEY		(0x0a57 << 1)
+#define WDT_MODE_EN		(0x1 << 0)
+#define WDT_MODE_RESET_EN	(0x1 << 1)
+
+struct sunxi_wdog {
+	u32 ctl;		/* 0x00 */
+	u32 mode;		/* 0x04 */
+	u32 res[2];
+};
+
+#endif /* _SUNXI_WATCHDOG_H_ */
-- 
2.1.1

[U-Boot] [PATCH 1/3] ARM: sunxi: Move watchdog register definitions to separate file

[Ian Campbell]

On Sat, 2014-10-04 at 20:37 +0800, Chen-Yu Tsai wrote:
> On later Allwinner SoCs, the watchdog hardware is by all means a
> separate hardware block, with its own address range and interrupt
> line.
> 
> Move the register definitions to a separate file to facilitate
> supporting newer SoCs.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Acked-by: Ian Campbell <ijc@hellion.org.uk>

(nb: this isn't pure code motion, please mention that in the commit log
in the future).

[U-Boot] [PATCH 2/3] ARM: sunxi: Add sun6i/sun8i timer block register definition

[Chen-Yu Tsai]

The RTC hardware has been moved out of the timer block on sun6i/sun8i.
In addition, there are more watchdogs available.

Also note that the timer block definition is not completely accurate
for sun5i/sun7i. Various blocks are missing or have been moved out.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/include/asm/arch-sunxi/timer.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h
index 8ed383e..03a0684 100644
--- a/arch/arm/include/asm/arch-sunxi/timer.h
+++ b/arch/arm/include/asm/arch-sunxi/timer.h
@@ -67,7 +67,9 @@ struct sunxi_timer_reg {
 	struct sunxi_timer timer[6];	/* We have 6 timers */
 	u8 res2[16];
 	struct sunxi_avs avs;
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
 	struct sunxi_wdog wdog;	/* 0x90 */
+	/* XXX the following is not accurate for sun5i/sun7i */
 	struct sunxi_64cnt cnt64;	/* 0xa0 */
 	u8 res4[0x58];
 	struct sunxi_rtc rtc;
@@ -75,6 +77,10 @@ struct sunxi_timer_reg {
 	struct sunxi_tgp tgp[4];
 	u8 res5[8];
 	u32 cpu_cfg;
+#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */
+	u8 res3[16];
+	struct sunxi_wdog wdog[5];	/* We have 5 watchdogs */
+#endif
 };
 
 #endif /* __ASSEMBLY__ */
-- 
2.1.1

[U-Boot] [PATCH 2/3] ARM: sunxi: Add sun6i/sun8i timer block register definition

[Ian Campbell]

On Sat, 2014-10-04 at 20:37 +0800, Chen-Yu Tsai wrote:
> The RTC hardware has been moved out of the timer block on sun6i/sun8i.
> In addition, there are more watchdogs available.
> 
> Also note that the timer block definition is not completely accurate
> for sun5i/sun7i. Various blocks are missing or have been moved out.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Acked-by: Ian Campbell <ijc@hellion.org.uk>

> ---
>  arch/arm/include/asm/arch-sunxi/timer.h | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h
> index 8ed383e..03a0684 100644
> --- a/arch/arm/include/asm/arch-sunxi/timer.h
> +++ b/arch/arm/include/asm/arch-sunxi/timer.h
> @@ -67,7 +67,9 @@ struct sunxi_timer_reg {
>  	struct sunxi_timer timer[6];	/* We have 6 timers */
>  	u8 res2[16];
>  	struct sunxi_avs avs;
> +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
>  	struct sunxi_wdog wdog;	/* 0x90 */
> +	/* XXX the following is not accurate for sun5i/sun7i */
>  	struct sunxi_64cnt cnt64;	/* 0xa0 */
>  	u8 res4[0x58];
>  	struct sunxi_rtc rtc;
> @@ -75,6 +77,10 @@ struct sunxi_timer_reg {
>  	struct sunxi_tgp tgp[4];
>  	u8 res5[8];
>  	u32 cpu_cfg;
> +#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */
> +	u8 res3[16];
> +	struct sunxi_wdog wdog[5];	/* We have 5 watchdogs */
> +#endif
>  };
>  
>  #endif /* __ASSEMBLY__ */

[U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i

[Chen-Yu Tsai]

The watchdog on sun6i/sun8i has a different layout.

Add the new layout and fix up the setup functions so that reset works.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/cpu/armv7/sunxi/board.c           | 15 +++++++++++++++
 arch/arm/include/asm/arch-sunxi/watchdog.h | 20 ++++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index b6d63db..ecf3ff9 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -75,6 +75,7 @@ int gpio_init(void)
 
 void reset_cpu(ulong addr)
 {
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
 	static const struct sunxi_wdog *wdog =
 		 &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
 
@@ -86,6 +87,20 @@ void reset_cpu(ulong addr)
 		/* sun5i sometimes gets stuck without this */
 		writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
 	}
+#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
+	static const struct sunxi_wdog *wdog =
+		 ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+	/* Set the watchdog for its shortest interval (.5s) and wait */
+	writel(WDT_CFG_RESET, &wdog->cfg);
+	writel(WDT_MODE_EN, &wdog->mode);
+	writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+
+	while (1) {
+		/* sun5i sometimes gets stuck without this */
+		writel(WDT_MODE_EN, &wdog->mode);
+	}
+#endif
 }
 
 /* do some early init */
diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h
index 5b755e3..ccc8fa3 100644
--- a/arch/arm/include/asm/arch-sunxi/watchdog.h
+++ b/arch/arm/include/asm/arch-sunxi/watchdog.h
@@ -12,6 +12,9 @@
 
 #define WDT_CTRL_RESTART	(0x1 << 0)
 #define WDT_CTRL_KEY		(0x0a57 << 1)
+
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
+
 #define WDT_MODE_EN		(0x1 << 0)
 #define WDT_MODE_RESET_EN	(0x1 << 1)
 
@@ -21,4 +24,21 @@ struct sunxi_wdog {
 	u32 res[2];
 };
 
+#else
+
+#define WDT_CFG_RESET		(0x1)
+#define WDT_MODE_EN		(0x1)
+
+struct sunxi_wdog {
+	u32 irq_en;		/* 0x00 */
+	u32 irq_sta;		/* 0x04 */
+	u32 res1[2];
+	u32 ctl;		/* 0x10 */
+	u32 cfg;		/* 0x14 */
+	u32 mode;		/* 0x18 */
+	u32 res2;
+};
+
+#endif
+
 #endif /* _SUNXI_WATCHDOG_H_ */
-- 
2.1.1

[U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i

[Ian Campbell]

On Sat, 2014-10-04 at 20:37 +0800, Chen-Yu Tsai wrote:
> +#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
> +	static const struct sunxi_wdog *wdog =
> +		 ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
> +
> +	/* Set the watchdog for its shortest interval (.5s) and wait */
> +	writel(WDT_CFG_RESET, &wdog->cfg);
> +	writel(WDT_MODE_EN, &wdog->mode);
> +	writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);

That's annoyingly close to the 4/5/7i version, but not quite close
enough to allow any meaningful sharing :-/

> +	while (1) {
> +		/* sun5i sometimes gets stuck without this */

Is this not therefore unnecessary on 6i/8i?

> +		writel(WDT_MODE_EN, &wdog->mode);
> +	}
> +#endif
>  }
>  
>  /* do some early init */
> diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h
> index 5b755e3..ccc8fa3 100644
> --- a/arch/arm/include/asm/arch-sunxi/watchdog.h
> +++ b/arch/arm/include/asm/arch-sunxi/watchdog.h
> @@ -12,6 +12,9 @@
>  
>  #define WDT_CTRL_RESTART	(0x1 << 0)
>  #define WDT_CTRL_KEY		(0x0a57 << 1)
> +
> +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
> +
>  #define WDT_MODE_EN		(0x1 << 0)
>  #define WDT_MODE_RESET_EN	(0x1 << 1)
>  
> @@ -21,4 +24,21 @@ struct sunxi_wdog {
>  	u32 res[2];
>  };
>  
> +#else
> +
> +#define WDT_CFG_RESET		(0x1)
> +#define WDT_MODE_EN		(0x1)
> +
> +struct sunxi_wdog {
> +	u32 irq_en;		/* 0x00 */
> +	u32 irq_sta;		/* 0x04 */
> +	u32 res1[2];
> +	u32 ctl;		/* 0x10 */
> +	u32 cfg;		/* 0x14 */
> +	u32 mode;		/* 0x18 */
> +	u32 res2;
> +};
> +
> +#endif
> +
>  #endif /* _SUNXI_WATCHDOG_H_ */

[U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i

[Chen-Yu Tsai]

On Sat, Oct 11, 2014 at 11:33 PM, Ian Campbell <ijc@hellion.org.uk> wrote:
> On Sat, 2014-10-04 at 20:37 +0800, Chen-Yu Tsai wrote:
>> +#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
>> +     static const struct sunxi_wdog *wdog =
>> +              ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
>> +
>> +     /* Set the watchdog for its shortest interval (.5s) and wait */
>> +     writel(WDT_CFG_RESET, &wdog->cfg);
>> +     writel(WDT_MODE_EN, &wdog->mode);
>> +     writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
>
> That's annoyingly close to the 4/5/7i version, but not quite close
> enough to allow any meaningful sharing :-/

I suppose it is possible to share using clrsetbits...

>> +     while (1) {
>> +             /* sun5i sometimes gets stuck without this */
>
> Is this not therefore unnecessary on 6i/8i?

The kernel restart driver uses this.
But Allwinner's original code does not.

ChenYu

>> +             writel(WDT_MODE_EN, &wdog->mode);
>> +     }
>> +#endif
>>  }
>>
>>  /* do some early init */
>> diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h
>> index 5b755e3..ccc8fa3 100644
>> --- a/arch/arm/include/asm/arch-sunxi/watchdog.h
>> +++ b/arch/arm/include/asm/arch-sunxi/watchdog.h
>> @@ -12,6 +12,9 @@
>>
>>  #define WDT_CTRL_RESTART     (0x1 << 0)
>>  #define WDT_CTRL_KEY         (0x0a57 << 1)
>> +
>> +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
>> +
>>  #define WDT_MODE_EN          (0x1 << 0)
>>  #define WDT_MODE_RESET_EN    (0x1 << 1)
>>
>> @@ -21,4 +24,21 @@ struct sunxi_wdog {
>>       u32 res[2];
>>  };
>>
>> +#else
>> +
>> +#define WDT_CFG_RESET                (0x1)
>> +#define WDT_MODE_EN          (0x1)
>> +
>> +struct sunxi_wdog {
>> +     u32 irq_en;             /* 0x00 */
>> +     u32 irq_sta;            /* 0x04 */
>> +     u32 res1[2];
>> +     u32 ctl;                /* 0x10 */
>> +     u32 cfg;                /* 0x14 */
>> +     u32 mode;               /* 0x18 */
>> +     u32 res2;
>> +};
>> +
>> +#endif
>> +
>>  #endif /* _SUNXI_WATCHDOG_H_ */
>
>

[U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i

[Ian Campbell]

On Sun, 2014-10-12 at 10:40 +0800, Chen-Yu Tsai wrote:
> On Sat, Oct 11, 2014 at 11:33 PM, Ian Campbell <ijc@hellion.org.uk> wrote:
> > On Sat, 2014-10-04 at 20:37 +0800, Chen-Yu Tsai wrote:
> >> +#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
> >> +     static const struct sunxi_wdog *wdog =
> >> +              ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
> >> +
> >> +     /* Set the watchdog for its shortest interval (.5s) and wait */
> >> +     writel(WDT_CFG_RESET, &wdog->cfg);
> >> +     writel(WDT_MODE_EN, &wdog->mode);
> >> +     writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
> >
> > That's annoyingly close to the 4/5/7i version, but not quite close
> > enough to allow any meaningful sharing :-/
> 
> I suppose it is possible to share using clrsetbits...

I think it probably isn't worth it.

> 
> >> +     while (1) {
> >> +             /* sun5i sometimes gets stuck without this */
> >
> > Is this not therefore unnecessary on 6i/8i?
> 
> The kernel restart driver uses this.
> But Allwinner's original code does not.

Unless it is needed in practice lets just leave it out.

Ian.

[U-Boot] [linux-sunxi] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i

[Julian Calaby]

Hi,

On Sat, Oct 4, 2014 at 10:37 PM, Chen-Yu Tsai <wens@csie.org> wrote:
> Hi,
>
> This series fixes support for the reset command on sun6i/sun8i.
> The watchdog hardware has changed in sun6i, both the register
> addresses and definitions. This makes the reset command unusable
> on sun6i.

Doesn't this break building multi-sub-arch kernels that support both
sun4i/sun5i/sun7i and sun6i/sun8i?

Would it be possible to just add a new driver for the modified
watchdog or put all the bits that changed into the device tree?

Thanks,

-- 
Julian Calaby

Email: julian.calaby at gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

[U-Boot] [linux-sunxi] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i

[Chen-Yu Tsai]

Hi,

On Sat, Oct 4, 2014 at 11:02 PM, Julian Calaby <julian.calaby@gmail.com> wrote:
> Hi,
>
> On Sat, Oct 4, 2014 at 10:37 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>> Hi,
>>
>> This series fixes support for the reset command on sun6i/sun8i.
>> The watchdog hardware has changed in sun6i, both the register
>> addresses and definitions. This makes the reset command unusable
>> on sun6i.
>
> Doesn't this break building multi-sub-arch kernels that support both
> sun4i/sun5i/sun7i and sun6i/sun8i?

Last time I checked, U-boot doesn't do multi-arch kernels.

> Would it be possible to just add a new driver for the modified
> watchdog or put all the bits that changed into the device tree?

That is pretty much what the "kernel" version of this does.
See: http://www.spinics.net/lists/arm-kernel/msg362853.html


Cheers
ChenYu

[U-Boot] [linux-sunxi] [PATCH 0/3] ARM: sunxi: Fix reset support on sun6i/sun8i

[Julian Calaby]

Hi,

On Sun, Oct 5, 2014 at 1:12 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> Hi,
>
> On Sat, Oct 4, 2014 at 11:02 PM, Julian Calaby <julian.calaby@gmail.com> wrote:
>> Hi,
>>
>> On Sat, Oct 4, 2014 at 10:37 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>> Hi,
>>>
>>> This series fixes support for the reset command on sun6i/sun8i.
>>> The watchdog hardware has changed in sun6i, both the register
>>> addresses and definitions. This makes the reset command unusable
>>> on sun6i.
>>
>> Doesn't this break building multi-sub-arch kernels that support both
>> sun4i/sun5i/sun7i and sun6i/sun8i?
>
> Last time I checked, U-boot doesn't do multi-arch kernels.

Looking at the paths, I could have sworn this was kernel code.

In that case, sorry for the noise.

Thanks,

-- 
Julian Calaby

Email: julian.calaby at gmail.com
Profile: http://www.google.com/profiles/julian.calaby/