public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [v2 PATCH 01/12] spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header
Date: Thu, 30 Oct 2014 09:14:55 +0100	[thread overview]
Message-ID: <1414656906-16632-2-git-send-email-hs@denx.de> (raw)
In-Reply-To: <1414656906-16632-1-git-send-email-hs@denx.de>

move CONFIG_SYS_SPI_WRITE_TOUT into drivers/spi/atmel_spi.h
and define a default value. Delete this define in the board
config files, where it is possible (all boards use currently
the same value).

Signed-off-by: Heiko Schocher <hs@denx.de>
---

Changes in v2:
  rebased against d58a9451e7339ed4cf2b2627e534611f427fb791
  new in v2

 drivers/spi/atmel_spi.h         | 4 ++++
 include/configs/afeb9260.h      | 1 -
 include/configs/at91sam9260ek.h | 1 -
 include/configs/at91sam9261ek.h | 1 -
 include/configs/at91sam9263ek.h | 1 -
 include/configs/at91sam9rlek.h  | 1 -
 include/configs/ethernut5.h     | 1 -
 include/configs/meesc.h         | 1 -
 include/configs/otc570.h        | 1 -
 include/configs/pm9261.h        | 1 -
 include/configs/pm9263.h        | 1 -
 include/configs/sbc35_a9g20.h   | 1 -
 include/configs/tny_a9260.h     | 1 -
 include/configs/usb_a9263.h     | 1 -
 14 files changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h
index d240945..1538a23 100644
--- a/drivers/spi/atmel_spi.h
+++ b/drivers/spi/atmel_spi.h
@@ -94,3 +94,7 @@ static inline struct atmel_spi_slave *to_atmel_spi(struct spi_slave *slave)
 	readl(as->regs + ATMEL_SPI_##reg)
 #define spi_writel(as, reg, value)				\
 	writel(value, as->regs + ATMEL_SPI_##reg)
+
+#if !defined(CONFIG_SYS_SPI_WRITE_TOUT)
+#define CONFIG_SYS_SPI_WRITE_TOUT	(5 * CONFIG_SYS_HZ)
+#endif
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 14bac15..932a309 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -77,7 +77,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 73917b0..72247cc 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -135,7 +135,6 @@
 #ifndef CONFIG_AT91SAM9G20EK_2MMC
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH		1
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 226f8c1..cb16bda 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -107,7 +107,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index b666d94..fa19e8b 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -119,7 +119,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH		1
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define AT91_SPI_CLK			15000000
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index b8d5dd1..d5f0197 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -100,7 +100,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH			1
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define AT91_SPI_CLK				15000000
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 4c69af6..ce61a16 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -78,7 +78,6 @@
 
 /* SPI */
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT	(5 * CONFIG_SYS_HZ)
 #define AT91_SPI_CLK			15000000
 
 /* Serial port */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 86ce5f2..955d0e2 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -124,7 +124,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 # define CONFIG_ATMEL_DATAFLASH_SPI
 # define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
 # define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 # define AT91_SPI_CLK				15000000
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 629967d..2390beb 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -174,7 +174,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 # define CONFIG_ATMEL_DATAFLASH_SPI
 # define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
 # define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 # define AT91_SPI_CLK				15000000
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 4a71927..0746056 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -202,7 +202,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index d9c04d1..f0f12af 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -216,7 +216,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH			1
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define AT91_SPI_CLK				15000000
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index a1b5751..e7c35ec 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -80,7 +80,6 @@
 #define CONFIG_SPI
 #define CONFIG_CMD_SPI
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT	(5 * CONFIG_SYS_HZ)
 
 #define CONFIG_CMD_EEPROM
 #define CONFIG_SPI_M95XXX
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 32f6b00..79c7fc5 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -85,7 +85,6 @@
 #define CONFIG_SPI
 #define CONFIG_CMD_SPI
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
 
 #define CONFIG_CMD_EEPROM
 #define CONFIG_SPI_M95XXX
diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h
index 3c54870..84571f6 100644
--- a/include/configs/usb_a9263.h
+++ b/include/configs/usb_a9263.h
@@ -85,7 +85,6 @@
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000
 #define AT91_SPI_CLK				8000000
-- 
1.8.3.1

  reply	other threads:[~2014-10-30  8:14 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-30  8:14 [U-Boot] [v2 PATCH 0/12] arm, at91, spl: add spl support for the taurus and corvus boards Heiko Schocher
2014-10-30  8:14 ` Heiko Schocher [this message]
2014-10-30  8:14 ` [U-Boot] [v2 PATCH 02/12] arm, at91: add spi dataflash support for the taurus board Heiko Schocher
2014-10-30  8:14 ` [U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init() Heiko Schocher
2014-10-31  1:55   ` Bo Shen
2014-10-31  5:33     ` Heiko Schocher
2014-10-30  8:14 ` [U-Boot] [v2 PATCH 04/12] arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45 Heiko Schocher
2014-10-30  8:14 ` [U-Boot] [v2 PATCH 05/12] arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE define Heiko Schocher
2014-10-30  8:15 ` [U-Boot] [v2 PATCH 06/12] spl, nand: add option to boot raw u-boot.bin image only Heiko Schocher
2014-10-30  8:15 ` [U-Boot] [v2 PATCH 07/12] mtd: atmel_nand: add missign include Heiko Schocher
2014-10-30  8:15 ` [U-Boot] [v2 PATCH 08/12] spl, nand, atmel_nand: add erase one block function Heiko Schocher
2014-10-30 23:16   ` Scott Wood
2014-10-30  8:15 ` [U-Boot] [v2 PATCH 09/12] spl, mtd, nand, atmel_nand: invert device ready pin logic Heiko Schocher
2014-10-30 23:18   ` Scott Wood
2014-10-30  8:15 ` [U-Boot] [v2 PATCH 10/12] arm, spl, at91: add at91sam9260 and at91sam9g45 spl support Heiko Schocher
2014-10-30 10:17   ` Bo Shen
2014-10-30 11:41     ` Heiko Schocher
2014-10-31  1:55       ` Bo Shen
2014-10-31  1:50   ` Bo Shen
2014-10-31  6:03     ` Heiko Schocher
2014-10-31  6:08     ` Wolfgang Denk
2014-10-30  8:15 ` [U-Boot] [v2 PATCH 11/12] arm, at91, spl: add spl support for the taurus board Heiko Schocher
2014-10-30  8:15 ` [U-Boot] [v2 PATCH 12/12] arm, spl, at91: add spl support for the corvus board Heiko Schocher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414656906-16632-2-git-send-email-hs@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox