From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Thu, 30 Oct 2014 09:14:57 +0100 Subject: [U-Boot] [v2 PATCH 03/12] arm, at91, mpddrc: fix typo in ddr2_init() In-Reply-To: <1414656906-16632-1-git-send-email-hs@denx.de> References: <1414656906-16632-1-git-send-email-hs@denx.de> Message-ID: <1414656906-16632-4-git-send-email-hs@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de use the configure value for computing the ba_off value not the value from the cr register. This leaded in a wrong ram configuration on the upcoming corvus spl board support. Signed-off-by: Heiko Schocher Reviewed-by: Andreas Bie?mann --- Changes in v2: add Reviewed-by: Andreas Bie?mann arch/arm/cpu/at91-common/mpddrc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c index 8136396..76668d2 100644 --- a/arch/arm/cpu/at91-common/mpddrc.c +++ b/arch/arm/cpu/at91-common/mpddrc.c @@ -26,7 +26,8 @@ int ddr2_init(const unsigned int ram_address, /* Compute bank offset according to NC in configuration register */ ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9; if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)) - ba_off += ((mpddr->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11; + ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + + 11; ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2; -- 1.8.3.1