From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/9] cppcheck cleanup: fix nullPointer errors
Date: Thu, 6 Nov 2014 14:02:57 +0100 [thread overview]
Message-ID: <1415278985-8482-2-git-send-email-wd@denx.de> (raw)
In-Reply-To: <1415278985-8482-1-git-send-email-wd@denx.de>
There are a number of places where U-Boot intentionally and legally
accesses physical address 0x0000, for example when installing
exception vectors on systems where these are located in low memory.
Add "cppcheck-suppress nullPointer" comments to silence cppcheck
where this is intentional and legal.
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
arch/arm/cpu/arm926ejs/mxs/mxs.c | 2 ++
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 2 ++
arch/arm/cpu/armv7/zynq/ddrc.c | 1 +
arch/blackfin/cpu/initcode.c | 1 +
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 5 ++++-
arch/sh/lib/zimageboot.c | 1 +
board/esd/pci405/cmd_pci405.c | 4 +++-
board/keymile/common/common.c | 1 +
board/scb9328/flash.c | 2 ++
9 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c
index 365542f..ef130ae 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxs.c
+++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c
@@ -83,7 +83,9 @@ void mx28_fixup_vt(uint32_t start_addr)
int i;
for (i = 0; i < 8; i++) {
+ /* cppcheck-suppress nullPointer */
vt[i] = ldr_pc;
+ /* cppcheck-suppress nullPointer */
vt[i + 8] = start_addr + (4 * i);
}
}
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
index d3e1369..d29b9aa 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -118,6 +118,8 @@ static void mxs_spl_fixup_vectors(void)
* fine.
*/
extern uint32_t _start;
+
+ /* cppcheck-suppress nullPointer */
memcpy(0x0, &_start, 0x60);
}
diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c
index 1ea086d..d74f8db 100644
--- a/arch/arm/cpu/armv7/zynq/ddrc.c
+++ b/arch/arm/cpu/armv7/zynq/ddrc.c
@@ -40,6 +40,7 @@ void zynq_ddrc_init(void)
* first stage bootloader. To get ECC to work all memory has
* been initialized by writing any value.
*/
+ /* cppcheck-suppress nullPointer */
memset((void *)0, 0, 1 * 1024 * 1024);
} else {
puts("ECC disabled ");
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index 2e640af..fde54ea 100644
--- a/arch/blackfin/cpu/initcode.c
+++ b/arch/blackfin/cpu/initcode.c
@@ -955,6 +955,7 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs)
uint32_t *hibernate_magic = 0;
SSYNC();
+ /* cppcheck-suppress nullPointer */
if (hibernate_magic[0] == 0xDEADBEEF) {
serial_putc('c');
bfin_write_EVT15(hibernate_magic[1]);
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 47b712d..072387a 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -161,9 +161,12 @@ void cpu_init_early_f(void *fdt)
setup_ifc_sram = (void *)SRAM_BASE_ADDR;
dst = (u32 *) SRAM_BASE_ADDR;
src = (u32 *) setup_ifc;
- for (i = 0; i < 1024; i++)
+ for (i = 0; i < 1024; i++) {
+ /* cppcheck-suppress nullPointer */
*dst++ = *src++;
+ }
+ /* cppcheck-suppress nullPointer */
setup_ifc_sram();
/* CLEANUP */
diff --git a/arch/sh/lib/zimageboot.c b/arch/sh/lib/zimageboot.c
index 86d3998..3fea5f5 100644
--- a/arch/sh/lib/zimageboot.c
+++ b/arch/sh/lib/zimageboot.c
@@ -45,6 +45,7 @@ int do_sh_zimageboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
bootargs = getenv("bootargs");
/* Clear zero page */
+ /* cppcheck-suppress nullPointer */
memset(param, 0, 0x1000);
/* Set commandline */
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index 55c20d0..29c688a 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -23,7 +23,7 @@
*/
int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- unsigned int *ptr = 0;
+ unsigned int *ptr;
int count = 0;
int count2 = 0;
int i;
@@ -35,12 +35,14 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
* Mark sync address
*/
ptr = 0;
+ /* cppcheck-suppress nullPointer */
*ptr = 0xffffffff;
puts("\nWaiting for image from pci host -");
/*
* Wait for host to write the start address
*/
+ /* cppcheck-suppress nullPointer */
while (*ptr == 0xffffffff) {
count++;
if (!(count % 100)) {
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 2ddb3da..b9aff1a 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -360,6 +360,7 @@ static int do_checktestboot(cmd_tbl_t *cmdtp, int flag, int argc,
testboot = (testpin != 0) && (s);
if (verbose) {
printf("testpin = %d\n", testpin);
+ /* cppcheck-suppress nullPointer */
printf("test_bank = %s\n", s ? s : "not set");
printf("boot test app : %s\n", (testboot) ? "yes" : "no");
}
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
index e3a582f..73bfa00 100644
--- a/board/scb9328/flash.c
+++ b/board/scb9328/flash.c
@@ -72,8 +72,10 @@ static FLASH_BUS_RET flash_status_reg (void)
FLASH_BUS *addr = (FLASH_BUS *) 0;
+ /* cppcheck-suppress nullPointer */
*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+ /* cppcheck-suppress nullPointer */
return *addr;
}
--
1.8.3.1
next prev parent reply other threads:[~2014-11-06 13:02 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-06 13:02 [U-Boot] [PATCH 0/9] cppcheck cleanup Wolfgang Denk
2014-11-06 13:02 ` Wolfgang Denk [this message]
2014-11-10 21:27 ` [U-Boot] [U-Boot,1/9] cppcheck cleanup: fix nullPointer errors Tom Rini
2014-11-06 13:02 ` [U-Boot] [PATCH 2/9] board/cogent/lcd.c: fix syntax error Wolfgang Denk
2014-11-10 21:28 ` [U-Boot] [U-Boot,2/9] " Tom Rini
2014-11-06 13:02 ` [U-Boot] [PATCH 3/9] drivers/usb/host/isp116x-hcd.c: " Wolfgang Denk
2014-11-06 13:23 ` Marek Vasut
2014-11-06 13:03 ` [U-Boot] [PATCH 4/9] drivers/net/uli526x.c: " Wolfgang Denk
2014-11-10 21:28 ` [U-Boot] [U-Boot,4/9] " Tom Rini
2014-11-06 13:03 ` [U-Boot] [PATCH 5/9] common/cmd_fitupd.c: restore corrupted file Wolfgang Denk
2014-11-10 21:28 ` [U-Boot] [U-Boot, " Tom Rini
2014-11-06 13:03 ` [U-Boot] [PATCH 6/9] board/matrix_vision/mvblx/sys_eeprom.c: fix buffer overflow Wolfgang Denk
2014-11-06 13:50 ` Michael Jones
2014-11-10 21:28 ` [U-Boot] [U-Boot, " Tom Rini
2014-11-06 13:03 ` [U-Boot] [PATCH 7/9] board/renesas/ecovec/ecovec.c: " Wolfgang Denk
2014-11-09 23:52 ` Nobuhiro Iwamatsu
2014-11-06 13:03 ` [U-Boot] [PATCH 8/9] ARM: MXS: fix Uninitialized variable error Wolfgang Denk
2014-11-10 21:28 ` [U-Boot] [U-Boot, " Tom Rini
2014-11-06 13:03 ` [U-Boot] [PATCH 9/9] board/esd/common/auto_update.c: fix Uninitialized variable Wolfgang Denk
2014-11-06 13:33 ` Matthias Fuchs
2014-11-10 21:28 ` [U-Boot] [U-Boot, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415278985-8482-2-git-send-email-wd@denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox