From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 3/3] arm, am335x: siemens boards add FIT support
Date: Tue, 18 Nov 2014 11:51:06 +0100 [thread overview]
Message-ID: <1416307867-32182-4-git-send-email-hs@denx.de> (raw)
In-Reply-To: <1416307867-32182-1-git-send-email-hs@denx.de>
add FIT support and set "boardid" from factoryset records
"DEV/id" and "COMP/ver". "boardid" is used for selecting
which fit configuration gets booted on the board.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
board/siemens/common/board.c | 9 ---------
board/siemens/common/factoryset.c | 18 ++++++++----------
board/siemens/common/factoryset.h | 1 +
board/siemens/draco/board.c | 9 +++++++++
board/siemens/pxm2/board.c | 34 ++++++++++++++++++++++++++++++++++
board/siemens/rut/board.c | 23 +++++++++++++++++++++++
include/configs/pxm2.h | 4 ++++
include/configs/rut.h | 4 ++++
8 files changed, 83 insertions(+), 19 deletions(-)
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 2782bcc..cc0ac6b 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -96,15 +96,6 @@ const struct dpll_params *get_dpll_ddr_params(void)
return &dpll_ddr;
}
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
- omap_nand_switch_ecc(1, 8);
-
- return 0;
-}
-#endif
-
#ifndef CONFIG_SPL_BUILD
#if defined(BOARD_DFU_BUTTON_GPIO)
/*
diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c
index be0091d..7baac3d 100644
--- a/board/siemens/common/factoryset.c
+++ b/board/siemens/common/factoryset.c
@@ -220,15 +220,6 @@ int factoryset_read_eeprom(int i2c_addr)
printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id,
factory_dat.usb_product_id);
#endif
- if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
- (uchar *)"id", buf,
- MAX_STRING_LENGTH)) {
- if (strncmp((const char *)buf, "PXM50", 5) == 0)
- factory_dat.pxm50 = 1;
- else
- factory_dat.pxm50 = 0;
- }
- debug("PXM50: %d\n", factory_dat.pxm50);
#if defined(CONFIG_VIDEO)
if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1",
(uchar *)"name", factory_dat.disp_name,
@@ -248,7 +239,14 @@ int factoryset_read_eeprom(int i2c_addr)
NULL, 16);
debug("version number: %d\n", factory_dat.version);
}
-
+ /* Get ASN from factory set if available */
+ if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+ (uchar *)"id", factory_dat.asn,
+ MAX_STRING_LENGTH)) {
+ debug("factoryset asn: %s\n", factory_dat.asn);
+ } else {
+ factory_dat.asn[0] = 0;
+ }
/* Get COMP/ver from factory set if available */
if (0 <= get_factory_record_val(cp, size, (uchar *)"COMP",
(uchar *)"ver",
diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h
index 7667b96..3f23d5e 100644
--- a/board/siemens/common/factoryset.h
+++ b/board/siemens/common/factoryset.h
@@ -20,6 +20,7 @@ struct factorysetcontainer {
#endif
unsigned char serial[MAX_STRING_LENGTH];
int version;
+ uchar asn[MAX_STRING_LENGTH];
uchar comp_version[MAX_STRING_LENGTH];
};
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index 9be2e34..ede73ba 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -280,4 +280,13 @@ U_BOOT_CMD(
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ omap_nand_switch_ecc(1, 8);
+
+ return 0;
+}
+#endif
+
#include "../common/board.c"
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 559af0e..264ba02 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -428,4 +428,38 @@ static int board_video_init(void)
return 0;
}
#endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ int ret;
+
+ omap_nand_switch_ecc(1, 8);
+
+#ifdef CONFIG_FACTORYSET
+ if (factory_dat.asn[0] != 0) {
+ char tmp[2 * MAX_STRING_LENGTH + 2];
+
+ if (strncmp((const char *)factory_dat.asn, "PXM50", 5) == 0)
+ factory_dat.pxm50 = 1;
+ else
+ factory_dat.pxm50 = 0;
+ sprintf(tmp, "%s_%s", factory_dat.asn,
+ factory_dat.comp_version);
+ ret = setenv("boardid", tmp);
+ if (ret)
+ printf("error setting board id\n");
+ } else {
+ factory_dat.pxm50 = 1;
+ ret = setenv("boardid", "PXM50_1.0");
+ if (ret)
+ printf("error setting board id\n");
+ }
+ debug("PXM50: %d\n", factory_dat.pxm50);
+#endif
+
+ return 0;
+}
+#endif
+
#include "../common/board.c"
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 1752df2..fb840f7 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -467,4 +467,27 @@ static int board_video_init(void)
return 0;
}
#endif /* ifdef CONFIG_VIDEO */
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ int ret;
+ char tmp[2 * MAX_STRING_LENGTH + 2];
+
+ omap_nand_switch_ecc(1, 8);
+
+ if (factory_dat.asn[0] != 0)
+ sprintf(tmp, "%s_%s", factory_dat.asn,
+ factory_dat.comp_version);
+ else
+ sprintf(tmp, "QMX7.E38_4.0");
+
+ ret = setenv("boardid", tmp);
+ if (ret)
+ printf("error setting board id\n");
+
+ return 0;
+}
+#endif
+
#include "../common/board.c"
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index d75d562..946b2c8 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -150,4 +150,8 @@
#define CONFIG_SYS_CONSOLE_FG_COL 0x00
#endif
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
#endif /* ! __CONFIG_PXM2_H */
diff --git a/include/configs/rut.h b/include/configs/rut.h
index 6bddede..0067ea4 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -154,4 +154,8 @@
#define CONFIG_SYS_CONSOLE_FG_COL 0x00
#endif
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
#endif /* ! __CONFIG_RUT_H */
--
1.8.3.1
next prev parent reply other threads:[~2014-11-18 10:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-18 10:51 [U-Boot] [PATCH v1 0/3] arm, am335x: siemens board updates Heiko Schocher
2014-11-18 10:51 ` [U-Boot] [PATCH v1 1/3] arm, am335x, siemens: fix factoryset interpretation Heiko Schocher
2014-12-05 14:53 ` [U-Boot] [U-Boot, v1, " Tom Rini
2014-11-18 10:51 ` [U-Boot] [PATCH v1 2/3] arm, am335x, siemens: read COMP/ver from factoryset Heiko Schocher
2014-12-05 14:53 ` [U-Boot] [U-Boot, v1, " Tom Rini
2014-11-18 10:51 ` Heiko Schocher [this message]
2014-12-05 14:53 ` [U-Boot] [U-Boot, v1, 3/3] arm, am335x: siemens boards add FIT support Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416307867-32182-4-git-send-email-hs@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox