[U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3

[Sjoerd Simons <sjoerd.simons@collabora.co.uk>]

On Thu, 2014-11-27 at 22:21 +0900, Hyungwon Hwang wrote:
> This patch adds support for Odroid-XU3.

I can't seem to access the EMMC with this patch, is that expected?


> --- /dev/null
> +++ b/board/samsung/odroid-xu3/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_ODROID_XU3
> +
> +config SYS_BOARD
> +	default "odroid-xu3"
> +
> +config SYS_VENDOR
> +	default "samsung"
> +
> +config SYS_CONFIG_NAME
> +	default "odroid_xu3"
> +
> +endif

I was studying the different between the peach-pi and the XU3 hardware
enablement a bit. I was wondering whta's the rationale for the XU3
having it's own board file and reconfiguring various clocks? Does the
hardkernel SPL/bl2 not setup things correctly?

> diff --git a/board/samsung/odroid-xu3/odroid-xu3.c b/board/samsung/odroid-xu3/odroid-xu3.c
> new file mode 100644
> index 0000000..8c54842
> --- /dev/null
> +++ b/board/samsung/odroid-xu3/odroid-xu3.c
> @@ -0,0 +1,122 @@
> +/*
> + * Copyright (C) 2014 Samsung Electronics
> + * Hyungwon Hwang <human.hwang@samsung.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/arch/clock.h>
> +#include "setup.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +unsigned int get_board_rev(void)
> +{
> +	return 0;
> +}
> +
> +int exynos_init(void)
> +{
> +	return 0;
> +}
> +
> +#ifdef CONFIG_BOARD_EARLY_INIT_F
> +static int board_clock_init(void)
> +{
> +	unsigned int set, clr, clr_src_cpu, clr_pll_con0;
> +	struct exynos5420_clock *clk = (struct exynos5420_clock *)
> +						samsung_get_base_clock();
> +	/*
> +	 * CMU_CPU clocks src to MPLL
> +	 * Bit values:                 0  ; 1
> +	 * MUX_APLL_SEL:        FIN_PLL   ; FOUT_APLL
> +	 * MUX_CORE_SEL:        MOUT_APLL ; SCLK_MPLL
> +	 * MUX_HPM_SEL:         MOUT_APLL ; SCLK_MPLL_USER_C
> +	 * MUX_MPLL_USER_SEL_C: FIN_PLL   ; SCLK_MPLL
> +	*/
> +
> +	/* Set CMU_CPU clocks src to OSCCLK */
> +	clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1);
> +	set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1);
> +
> +	clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
> +
> +	while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
> +		continue;
> +
> +	/* Set APLL to 1200MHz */
> +	clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) |
> +			PLL_ENABLE(1);
> +	set = SDIV(0) | PDIV(2) | MDIV(100) | PLL_ENABLE(1);
> +
> +	clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
> +
> +	while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))
> +		continue;
> +
> +	/* Set CMU_CPU clocks src to APLL */
> +	set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0);
> +	clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
> +
> +	while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
> +		continue;
> +
> +	clr = ARM_RATIO(7) | CPUD_RATIO(7) | ATB_RATIO(7) |
> +	      PCLK_DBG_RATIO(7) | APLL_RATIO(7) | ARM2_RATIO(7);
> +	set = ARM_RATIO(0) | CPUD_RATIO(2) | ATB_RATIO(5) |
> +	      PCLK_DBG_RATIO(5) | APLL_RATIO(0) | ARM2_RATIO(0);
> +
> +	clrsetbits_le32(&clk->div_cpu0, clr, set);
> +
> +	while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)
> +		continue;
> +
> +	/* Set MPLL to 800MHz */
> +	set = SDIV(1) | PDIV(3) | MDIV(200) | PLL_ENABLE(1);
> +
> +	clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
> +
> +	while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))
> +		continue;
> +
> +	/* Set CLKMUX_UART src to MPLL */
> +	clr = UART0_SEL(7) | UART1_SEL(7) | UART2_SEL(7) | UART3_SEL(7);
> +	set = UART0_SEL(3) | UART1_SEL(3) | UART2_SEL(3) | UART3_SEL(3);
> +
> +	clrsetbits_le32(&clk->src_peric0, clr, set);
> +
> +	/* Set SCLK_UART to 400 MHz (MPLL / 2) */
> +	clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
> +	      UART3_RATIO(15);
> +	set = UART0_RATIO(1) | UART1_RATIO(1) | UART2_RATIO(1) |
> +	      UART3_RATIO(1);
> +
> +	clrsetbits_le32(&clk->div_peric0, clr, set);
> +
> +	while (readl(&clk->div_stat_peric0) & DIV_STAT_PERIC0_CHANGING)
> +		continue;
> +
> +	/* Set CLKMUX_MMC src to MPLL */
> +	clr = MUX_MMC0_SEL(7) | MUX_MMC1_SEL(7) | MUX_MMC2_SEL(7);
> +	set = MUX_MMC0_SEL(3) | MUX_MMC1_SEL(3) | MUX_MMC2_SEL(3);
> +
> +	clrsetbits_le32(&clk->src_fsys, clr, set);
> +
> +	clr = MMC0_RATIO(0x3ff) | MMC1_RATIO(0x3ff) | MMC2_RATIO(0x3ff);
> +	set = MMC0_RATIO(0) | MMC1_RATIO(0) | MMC2_RATIO(0);
> +
> +	clrsetbits_le32(&clk->div_fsys1, clr, set);
> +
> +	/* Wait for divider ready status */
> +	while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING)
> +		continue;
> +
> +	return 0;
> +}
> +
> +int exynos_early_init_f(void)
> +{
> +	return board_clock_init();
> +}
> +#endif


-- 
Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Collabora Ltd.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 6170 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141127/65bfa96d/attachment.bin>