[U-Boot] [PATCH 13/14] sun8i: Add dram initialization support

[Ian Campbell <ijc@hellion.org.uk>]

On Tue, 2014-12-16 at 21:31 +0100, Hans de Goede wrote:
> Based on the register / dram_para headers from the Allwinner u-boot / linux
> sources + the init sequences from boot0.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> +/*
> + * Note this code uses a lot of magic hex values, that is because this code
> + * simply replays the init sequence as done by the Allwinner boot0 code, so
> + * we do not know what these values mean. There are no symbolic constants for
> + * these magic values, since we do not know how to name them and making up
> + * names for them is not useful.

On that basis I've only really given this a quick glance. I've no
problem with it.

Couple of queries about the defconfig changes:

> diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
> index 50c2f93..37aa46d 100644
> --- a/configs/Ippo_q8h_v5_defconfig
> +++ b/configs/Ippo_q8h_v5_defconfig
> @@ -1,8 +1,15 @@
> +CONFIG_SPL=y
>  CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
> -CONFIG_ARM=y
> -CONFIG_ARCH_SUNXI=y
> -CONFIG_MACH_SUN8I=y
> -CONFIG_TARGET_IPPO_Q8H_V5=y

Not replaced with a S: variant? I know you want CONFIG_TARGET to go, but
I don't think that was part of what you intended in this patch.

> -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb"
> +CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v5.dtb"

The switch from CONFIG_DEFAULT_DEVICE_TREE to CONFIG_FDTFILE conversion
seems a little out of place too.

Ian.